DOWNLOAD Sharp XG-NV4SE (serv.man4) Service Manual ↓ Size: 2.62 MB | Pages: 28 in PDF or view online for FREE

1-1. Detach the Intake cover.
1-2. Loosen the lamp cover screw and draw out the lamp cover in the direction of arrow (toward yourself).
1-3. Remove the two lamp unit lock screws. Detach the lamp unit.

When replacing the lamp, make sure
that there is a clearance of over
8mm between the terminal and the
lamp snap-on spring (and other
metallic parts).

SHARP

1-3

1-3

1-2

1-1

Lamp snap-on spring

Lamp unit

Terminal

Intake cover

Lamp cover

2-1. Remove the five rear cabinet lock screws.
2-2. Remove the four terminal board lock screws off the rear cabinet. Unhook and detach the rear cabinet from

below.

2-3. Remove the four top cabinet lock screws from below.

SHARP

2-4

(KY)

Top cabinet

Rear cabinet

Video Unit (for XG-NV4SM, 
XG-NV40SA as well as AUSTRALIA,  
NEW ZEALAND and HONG KONG
versions of XG-NV4SE)

2-4. Slowly lift the top cabinet and disconnect the operation key unit connector (KY). Then take away the top

cabinet.

SHARP

2-3

2-2

2-1

Press both sides of the bottom
cabinet in the directions of 
arrow to undo the hooks. Lift 
and detach the top cabinet.

Hook