DOWNLOAD Sharp XG-MB67X (serv.man17) Service Manual ↓ Size: 1.29 MB | Pages: 30 in PDF or view online for FREE

Model
XG-MB67X (serv.man17)
Pages
30
Size
1.29 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Setup Guide
File
xg-mb67x-sm17.pdf
Date
PREV: Sharp XG-MB67X (serv.man16) Service Manual

Sharp XG-MB67X (serv.man17) User Manual / Operation Manual ▷ View online

-5
RS-232C Specifications and Commands
INPUT 1 Picture Mode : Presentation
INPUT 1 Picture Mode : Movie
INPUT 1 Picture Mode : Game
INPUT 1 Picture Mode : sRGB
INPUT 1 Contrast (
ⴑ30 – ⴐ30)
INPUT 1 Bright (
ⴑ30 – ⴐ30)
INPUT 1 Color (
ⴑ30 – ⴐ30)
INPUT 1 Tint (
ⴑ30 – ⴐ30)
INPUT 1 Red (
ⴑ30 – ⴐ30)
INPUT 1 Blue (
ⴑ30 – ⴐ30)
INPUT 1 Sharp (
ⴑ30 – ⴐ30)
INPUT 1 CLR Temp *2
INPUT 1 Bright Boost (0 – 2)
INPUT 1 Progressive : 2D
INPUT 1 Progressive : 3D
INPUT 1 Progressive : Film Mode
INPUT 1 Signal Type : Auto
INPUT 1 Signal Type : RGB
INPUT 1 Signal Type : Component
INPUT 2 Picture Mode : Standard
INPUT 2 Picture Mode : Presentation
INPUT 2 Picture Mode : Movie
INPUT 2 Picture Mode : Game
INPUT 2 Picture Mode : sRGB
INPUT 2 Contrast (
ⴑ30 – ⴐ30)
INPUT 2 Bright (
ⴑ30 – ⴐ30)
INPUT 2 Color (
ⴑ30 – ⴐ30)
INPUT 2 Tint (
ⴑ30 – ⴐ30)
INPUT 2 Red (
ⴑ30 – ⴐ30)
INPUT 2 Blue (
ⴑ30 – ⴐ30)
INPUT 2 Sharp (
ⴑ30 – ⴐ30)
INPUT 2 CLR Temp *2
INPUT 2 Bright Boost (0 – 2)
INPUT 2 Progressive : 2D
INPUT 2 Progressive : 3D
INPUT 2 Progressive : Film Mode
INPUT 2 Signal Type : Auto
INPUT 2 Signal Type : RGB
INPUT 2 Signal Type : Component
INPUT 3 Picture Mode : Standard
INPUT 3 Picture Mode : Presentation
INPUT 3 Picture Mode : Movie
INPUT 3 Picture Mode : Game
INPUT 3 Contrast (
ⴑ30 – ⴐ30)
INPUT 3 Bright (
ⴑ30 – ⴐ30)
INPUT 3 Color (
ⴑ30 – ⴐ30)
INPUT 3 Tint (
ⴑ30 – ⴐ30)
INPUT 3 Sharp (
ⴑ30 – ⴐ30)
INPUT 3 CLR Temp *2
INPUT 3 Bright Boost (0 – 2)
INPUT 3 Progressive : 2D
INPUT 3 Progressive : 3D
INPUT 3 Progressive : Film Mode
INPUT 4 Picture Mode : Standard
INPUT 4 Picture Mode : Presentation
INPUT 4 Picture Mode : Movie
INPUT 4 Picture Mode : Game
INPUT 4 Contrast (
ⴑ30 – ⴐ30)
INPUT 4 Bright (
ⴑ30 – ⴐ30)
INPUT 4 Color (
ⴑ30 – ⴐ30)
INPUT 4 Tint (
ⴑ30 – ⴐ30)
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR 
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
I
I
I
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
I
I
I
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
P
P
P
P
P
B
C
T
R
B
S
C
W
I
I
I
S
S
S
P
P
P
P
P
P
B
C
T
R
B
S
C
W
I
I
I
S
S
S
P
P
P
P
P
B
C
T
S
C
W
I
I
I
P
P
P
P
P
B
C
T
S
S
S
S
I
R
O
I
D
E
H
T
E
P
P
P
I
I
I
S
S
S
S
S
I
R
O
I
D
E
H
T
E
P
P
P
I
I
I
S
S
S
S
I
R
O
I
H
T
E
P
P
P
S
S
S
S
I
R
O
I
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
_
_
_
_
_
_
_
_
*
*
*
*
1
1
1
1
*
*
*
*
*
*
*
*
_
_
_
_
_
_
_
1
1
1
1
1
*
*
*
*
*
*
*
*
_
_
_
_
_
_
_
1
1
1
1
*
*
*
*
*
*
_
_
_
_
1
1
1
1
*
*
*
*
1
2
3
4
*
*
*
*
*
*
*
*
*
0
1
2
0
1
2
0
1
2
3
4
*
*
*
*
*
*
*
*
*
0
1
2
0
1
2
0
1
2
3
*
*
*
*
*
*
*
0
1
2
0
1
2
3
*
*
*
*
CONTROL CONTENTS
Power ON
Standby mode
(or 30-second startup time)
COMMAND PARAMETER
RETURN
-6
RS-232C Specifications and Commands
INPUT 4 Sharp (
ⴑ30 – ⴐ30)
INPUT 4 CLR Temp *2
INPUT 4 Bright Boost (0 – 2)
INPUT 4 Progressive : 2D
INPUT 4 Progressive : 3D
INPUT 4 Progressive : Film Mode
Clock (
ⴑ150 – ⴐ150)
Phase (
ⴑ30 – ⴐ30)
H-Position (
ⴑ150 – ⴐ150)
V-Position (
ⴑ60 – ⴐ60)
Fine Sync Adjustment Reset
Auto Sync : Off
Auto Sync : On
Internal Speaker : Off
Internal Speaker : On
Image Shift (
ⴑ96 – ⴐ96 )
OSD Display : Off
OSD Display : On
Video System Selection : AUTO
Video System Selection : PAL
Video System Selection : SECAM
Video System Selection : NTSC4.43
Video System Selection : NTSC3.58
Video System Selection : PAL_M
Video System Selection : PAL_N
Video System Selection : PAL-60
Background Selection : Logo
Background Selection : Blue
Background Selection : None
Lamp Setting : Bright
Lamp Setting : Eco
ⴐQuiet
Auto Search : Off 
Auto Search : On
Auto Power Off : Off
Auto Power Off : On
Auto Keystone : Off
Auto Keystone : On 
PRJ Mode : Reverse Off
PRJ Mode : Reverse On
PRJ Mode : Invert Off
PRJ Mode : Invert On
Language Selection : ENGLISH
Language Selection : DEUTSCH
Language Selection : ESPAÑOL
Language Selection : NEDERLANDS
Language Selection : FRANÇAIS
Language Selection : ITALIANO
Language Selection : SVENSKA
Language Selection : 
Language Selection : PORTUGUÊS
Language Selection : 
Language Selection : 
Setup Guide : Off
Setup Guide : On
System Sound : Off
System Sound : On
RGB Horizontal Frequency Check
RGB Vertical Frequency Check
Fan Mode : Normal
Fan Mode : High
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
x10
-1 
kHz (***.* or ERR)
Hz (***.* or ERR)
OK or ERR 
OK or ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
V
V
V
V
V
V
I
I
I
I
I
A
A
A
A
L
I
I
M
M
M
M
M
M
M
M
I
I
I
T
T
I
I
A
A
A
A
I
I
I
I
M
M
M
M
M
M
M
M
M
M
M
S
S
S
S
T
T
H
H
B
B
B
B
B
B
N
N
A
A
A
A
A
S
S
N
M
M
E
E
E
E
E
E
E
E
M
M
M
H
H
N
N
P
P
T
T
M
M
M
M
E
E
E
E
E
E
E
E
E
E
E
E
E
S
S
F
F
L
L
S
C
W
I
I
I
C
P
H
V
R
D
D
P
P
D
D
D
S
S
S
S
S
S
S
S
B
B
B
M
M
S
S
O
O
K
K
R
R
I
I
L
L
L
L
L
L
L
L
L
L
L
G
G
N
N
R
R
M
M
H
T
E
P
P
P
L
H
P
P
E
J
J
K
K
S
I
I
Y
Y
Y
Y
Y
Y
Y
Y
G
G
G
D
D
E
E
W
W
S
S
E
E
N
N
A
A
A
A
A
A
A
A
A
A
A
U
U
D
D
Q
Q
D
D
_
_
_
_
_
_
*
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
_
_
_
_
*
*
*
*
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
_
_
_
_
*
*
*
*
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
1
1
_
_
_
_
_
_
_
_
*
*
*
0
1
2
*
*
*
*
1
0
1
0
1
*
0
1
1
2
3
4
5
6
7
8
1
3
4
0
1
0
1
0
1
0
1
0
1
0
1
1
2
3
4
5
6
7
8
9
0
1
0
1
0
1
1
2
0
1
CONTROL CONTENTS
Power ON
Standby mode
(or 30-second startup time)
COMMAND PARAMETER
RETURN
PJLink
TM
 Compliant:
This product conforms with the PJLink standard Class 1 and all Class 1 commands are implemented.
This product confirms with the PJLink standard specification version 1.00.
-7
Page 8
1.
Connecting the projector to a computer
Setting up the Projector Network Environment
This section describes the basic procedure for using the projector via the network.
If the network is already constructed, the projector’s network settings may need to be changed. Please
consult your network administrator for assistance with these settings.
You can make network settings both on the projector and on the computer. The following procedure is for
making settings on the computer.
Network settings on the computer
Connect a LAN cable (Category 5, cross-over type) between the computer and projector.
Pages 9, 10
2.
Setting an IP address for the computer
Adjust the IP settings of the computer to enable one-to-one communications with the projector.
Page 11
3.
Setting up a network connection for the projector
Adjust the projector network settings to conform to your network.
LAN cable
(commercially available)
Use Internet Explorer
(version 5.0 or later)
to make various
projector settings.
Temporarily change
the computer’s IP
address.
• Microsoft
®
 and Windows
®
 are registered trademarks of Microsoft Corporation in the United States and/or
other countries.
• All other company or product names are trademarks or registered trademarks of their respective compa-
nies.
-8
Setting up the Projector Network Environment
1. Connecting the Pro-
jector to a Computer
Establishing a one-to-one connection from the
projector to a computer. Using a LAN cable
(Category 5, cross-over type) you can config-
ure the projector via the computer.
1
Disconnect the computer’s LAN
cable from the existing network.
2
Connect a LAN cable (a UTP
cable, Category 5, cross-over
type) to the projector’s LAN ter-
minal and connect the other end
of the cable to the computer’s
LAN terminal.
3
Plug the power cord into the AC
socket of the projector.
4
Turn on the computer.
Info
Confirm that the LINK LED on the rear of the
projector illuminates. If the LINK LED does not
illuminate, check the following :
• The LAN cable is properly connected.
• The power switches of both the projector
and the computer are on.
LAN cable
(cross-over type, commercially available)
ON
A LAN cable being
connected to the network
This completes the connection. Now proceed to “2. Setting an IP Address for the
Computer”.
Page of 30
Display

Click on the first or last page to see other XG-MB67X (serv.man17) service manuals if exist.

RANDOM: