DOWNLOAD Sharp XG-C55X (serv.man29) Service Manual ↓ Size: 9.04 MB | Pages: 106 in PDF or view online for FREE

Power code

Supplied
accessory

• Secure the connectors by tightening

the thumbscrews.

Note

• See page 

Chart” for a list of computer signals com-
patible with the projector. Use with com-
puter signals other than those listed may
cause some of the functions not to work.

• When connecting the projector to a com-

puter in this way, select “RGB” for “Signal
Type” in the “Picture” menu. See page 

• A Macintosh adaptor may be required for

use with some Macintosh computers. Con-
tact your nearest Sharp Authorized
Projector Dealer or Service Center.

• Depending on the computer you are us-

ing, an image may not be projected unless
the signal output setting of the computer is
switched to the external output. Refer to
the computer operation manual for switch-
ing the computer signal output settings.

Supplied
accessory

RGB cable

2

Computer audio cable (commercially
available or available as Sharp service
part QCNWGA013WJPZ)

To RGB output terminal

To audio output terminal

1

RGB cable

Notebook computer

■ Connect the thumbscrew cable making sure that it

fits correctly into the terminal. Then, firmly secure
the connectors by tightening the screws on both
sides of the plug.

■ Do not remove the ferrite core attached to the RGB

cable.

■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC

compatible computer will communicate their setting requirements, allowing for quick and easy setup.

■ Before using the “Plug and Play” function, be sure to turn on the projector first and the connected

computer last.

Note

• The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA

DDC compatible computer.

1

S-video cable (commercially available)

Note

• The INPUT 4 (S-VIDEO) terminal uses a

video signal system in which the picture
is separated into color and luminance sig-
nals to realize a higher-quality image. To
view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 4 terminal on the projec-
tor and the S-video output terminal on the
video equipment.

To S-video output terminal

To video output terminal

To audio output terminal

2

Audio cable (commercially available)

1

Composite video cable
(commercially available)

VCR or other audio-visual equipment

Optional
cable

3RCA to 15-pin D-sub cable
AN-C3CP
(9'10" (3.0 m))

To analog component
output terminal

To audio output terminal

2

ø3.5 mm stereo minijack to RCA audio cable
(commercially available)

1

3 RCA to 15-pin
D-sub cable (sold separately)

DVD player or
DTV* decoder

Note

• When connecting the projector to the

video equipment in this way, select “Com-
ponent” for “Signal Type” in the “Picture”
menu. See page 

• A ø3.5 mm stereo minijack to RCA audio

cable (commercially available) is required
for audio input.