Sharp XG-C50XE (serv.man27) User Manual / Operation Manual ▷ View online
Easy to Use Functions
-69
Selecting the Economy Mode
These functions allow you to reduce the power consumption of the projector.
Setting the Power Save
Mode
Mode
Select “Power Save” in “Economy
Mode” under the “Options (1)” menu on
the menu screen.
➝ For operating the menu screen, see
pages
Mode” under the “Options (1)” menu on
the menu screen.
➝ For operating the menu screen, see
pages
42 to 45
.
Note
• Although lamp life and noise are improved
when “Power Save” is set to “ON”, bright-
ness decreases by 20%.
ness decreases by 20%.
• “Power Save” mode is factory preset to
“OFF”.
Monitor Out/RS-232C
Off Function
Off Function
This projector consumes power when using a
monitor connected to the OUTPUT (INPUT 1,
2) terminal and a computer connected to the
RS-232C terminal. When not using these ter-
minals, “Mntr.out/RS232” can be set to “OFF”
to reduce standby power consumption.
monitor connected to the OUTPUT (INPUT 1,
2) terminal and a computer connected to the
RS-232C terminal. When not using these ter-
minals, “Mntr.out/RS232” can be set to “OFF”
to reduce standby power consumption.
Select “Mntr.out/RS232” in “Economy
Mode” under the “Options (1)” menu on
the menu screen.
Mode” under the “Options (1)” menu on
the menu screen.
➝ For operating the menu screen, see
pages
pages
42 to 45
.
ON
Monitor Out/RS-232C connection
is set to “ON”.
is set to “ON”.
OFF
Monitor Out/RS-232C connection
is set to “OFF”.
is set to “OFF”.
Note
• Set “Mntr.out/RS232” to “ON” when using
the Sharp Advanced Presentation Software.
Brightness
80%
100%
Status
ON
(Low power
mode)
OFF
(Standard
mode)
(Low power
mode)
OFF
(Standard
mode)
Power
consumption
290 W
340 W
Lamp Life
2,000 hours
1,500 hours
PG-C45X#E_PDF#p67_70.p65
03.2.17, 11:38 AM
69
-70
-70
Remaining Lamp Life
(Percentage)
(Percentage)
Displaying the Remaining Lamp Life (Percentage)
Checking the Remaining
Lamp Life (Percentage)
Lamp Life (Percentage)
This function allows you to check the remain-
ing lamp life (percentage).
ing lamp life (percentage).
Select the “Options (2)” menu on the
menu screen.
➝ For operating the menu screen, see
pages
menu screen.
➝ For operating the menu screen, see
pages
42 to 45
.
Note
• It is recommended that the lamp be
changed when the remaining lamp life
becomes 6%.
For lamp replacement, contact your
nearest Sharp Author ized Projector
Dealer or Service Center.
becomes 6%.
For lamp replacement, contact your
nearest Sharp Author ized Projector
Dealer or Service Center.
• The table at the right indicates rough esti-
mates in the case of using only in each mode
shown. Remaining lamp life changes within
the range of the values shown depending
on the frequency at which “Power Save” is
switched “ON” and “OFF” (see page
shown. Remaining lamp life changes within
the range of the values shown depending
on the frequency at which “Power Save” is
switched “ON” and “OFF” (see page
69
).
Automatic Power Off
Function
Function
When no input signal is detected for more than
15 minutes, the projector will automatically
power off if set to “ON”.
The Auto Power Off function will be disabled
when it has been set to “OFF”.
15 minutes, the projector will automatically
power off if set to “ON”.
The Auto Power Off function will be disabled
when it has been set to “OFF”.
Select “Auto Power Off” in “Economy
Mode” under the “Options (1)” menu on
the menu screen.
➝ For operating the menu screen, see
pages
Mode” under the “Options (1)” menu on
the menu screen.
➝ For operating the menu screen, see
pages
42 to 45
.
Note
• When the Auto Power Off function is set
to “ON”, 5 minutes before the power turns
off, the message “Power OFF in X min.”
will appear on the screen to indicate the
remaining minutes.
off, the message “Power OFF in X min.”
will appear on the screen to indicate the
remaining minutes.
-70
Selecting the Economy Mode
Remaining lamp life
100%
6%
2,000 hours
133 hours
1,500 hours
100 hours
Used with only “ON”
on “Power Save”
(Low power mode)
Used with only “OFF”
on “Power Save”
(Standard mode)
on “Power Save”
(Low power mode)
Used with only “OFF”
on “Power Save”
(Standard mode)
PG-C45X#E_PDF#p67_70.p65
03.2.17, 11:38 AM
70
Easy to Use Functions
-71
Reversing/Inverting Projected Images
This projector is equipped with a reverse/invert image function that allows you to reverse or
invert the projected image for various applications.
invert the projected image for various applications.
Setting the Projection
Mode
Mode
Select “PRJ Mode” in the “Options (2)”
menu on the menu screen.
menu on the menu screen.
➝ For operating the menu screen, see
pages
pages
42 to 45
.
Note
• If a password has been set, the password
input box will be displayed when select-
ing the “PRJ Mode”.
ing the “PRJ Mode”.
• This function is used for the reversed im-
age and ceiling-mount setups. See page
32
for these setups.
Locking the Operation Buttons on the Projector
This function can be used to lock the use of certain operation buttons on the projector.
The following are the three keylock levels.
The following are the three keylock levels.
Setting up the Keylock
Select “Keylock Level” in the “Options
(2)” menu on the menu screen.
(2)” menu on the menu screen.
➝ For operating the menu screen, see
pages
pages
42 to 45
.
Note
• If a password has been set, the password
input box will be displayed when select-
ing the “Keylock Level”.
ing the “Keylock Level”.
Selected Item
Front
Ceiling + Front
Rear
Ceiling + Rear
Description
Normal image
Inverted image
Reversed image
Reversed and inverted image
Keylock Level
Normal
Level A
Level B
Description
All operation buttons are functional.
Only INPUT/VOLUME buttons on the projector are available.
All operation buttons on the projector are unavailable.
Front
Ceiling+Front
Rear
Ceiling+Rear
PG-C45X#E_PDF#p71_78.p65
03.2.17, 11:39 AM
71
-72
Canceling the Keylock
Setting
Setting
When the Keylock Level is set to “Normal”,
all buttons are functional.
all buttons are functional.
Select “
Keylock Level
” in the “Options
(2)” menu on the menu screen and set
“
“
Normal”.
➝ For operating the menu screen, see
pages
pages
42 to 45
.
Note
• When a password has been set, and
“Keylock Level” is selected, the password
input box will be displayed.
input box will be displayed.
• If both a password and the Keylock Level
have been set at the same time, the pass-
word will be necessary before changing
the Keylock Level.
word will be necessary before changing
the Keylock Level.
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by select-
ing the baud rate.
ing the baud rate.
Selecting the Transmis-
sion Speed (RS-232C)
sion Speed (RS-232C)
Select “RS-232C” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages
menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45
.
Note
• When a password has been set, and “RS-
232C” is selected, the password input box
will be displayed.
will be displayed.
• Make sure that both the projector and
computer are set for the same baud rate.
Refer to the computer’s operation manual
for instructions for setting the computer’s
baud rate.
Refer to the computer’s operation manual
for instructions for setting the computer’s
baud rate.
-72
Locking the Operation Buttons on the Projector
PG-C45X#E_PDF#p71_78.p65
03.2.17, 11:39 AM
72
Click on the first or last page to see other XG-C50XE (serv.man27) service manuals if exist.