Sharp XG-C50XE (serv.man27) User Manual / Operation Manual ▷ View online
Easy to Use Functions
-73
Setting up a Password
Entering the Password
Select “
Password
” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages
➝ For operating the menu screen, see
pages
42 to 45
.
1
Press '
'
'
'
' or "
"
"
"
" to select the de-
sired number and then press
|
|
|
|
|
|.
2
Enter the 3 remaining digits
and press
and press
.
3
Enter the password again in
“Reconfirm” and press
“Reconfirm” and press
.
Note
• When a password is set, you need
to enter the password to change
“PRJ Mode”, “Keylock Level”, “RS-
232C”, “Anti-Theft” and “All Reset”
settings.
“PRJ Mode”, “Keylock Level”, “RS-
232C”, “Anti-Theft” and “All Reset”
settings.
A password can be set by the user to prevent adjustments to certain settings on the “Options
(2)” menu. Using a password together with the Keylock Level (page
(2)” menu. Using a password together with the Keylock Level (page
71
) is more effective.
PG-C45X#E_PDF#p71_78.p65
03.2.17, 11:39 AM
73
-74
Changing the Password
Select “Password” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages
menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45
.
1
Press '
'
'
'
', "
"
"
"
" and |
|
|
|
| to enter the
password in “Old Password”
and press
and press
.
2
Press '
'
'
'
', "
"
"
"
" and |
|
|
|
| to set the
new password and press
.
3
Enter the new 4-digit password
again in “Reconfirm” and
press
again in “Reconfirm” and
press
.
Note
• If you do not want to set a password, leave
the fields in procedures 2 and 3 blank and
press
press
.
• To cancel the password settings, click
.
If You Forget Your
Password
Password
If you forget the password, delete it and set a
new password using the following procedure.
new password using the following procedure.
Press
-74
Setting up a Password
ON
ON
ON
PG-C45X#E_PDF#p71_78.p65
03.2.17, 11:39 AM
74
Easy to Use Functions
-75
Setting the
Anti-Theft
The anti-theft function prevents unauthorized use of the projector. You can choose to use
this function or not. If you do not want to use this function, just do not enter the keycode.
Once the anti-theft function is activated, users will need to enter the correct keycode each
time the projector is turned on. Failure to enter the correct keycode will cause images not to
be projected. The following procedures explain how to use this function.
this function or not. If you do not want to use this function, just do not enter the keycode.
Once the anti-theft function is activated, users will need to enter the correct keycode each
time the projector is turned on. Failure to enter the correct keycode will cause images not to
be projected. The following procedures explain how to use this function.
Entering the Keycode
• “Anti-Theft” cannot be selected unless
“Password” is set. (See page
73
.)
• When “Anti-Theft” is selected, the password
input box will appear. Enter the keycode af-
ter the right password is entered.
ter the right password is entered.
Select “Anti-Theft” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages
menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45
.
Info
• Once the function is activated, you must
remember the correct keycode. We sug-
gest you record the keycode in a safe
place where only authorized users have
access. If you lose or forget your keycode,
you will need to contact your nearest
Sharp Authorized Projector Dealer or Ser-
vice Center (see page
gest you record the keycode in a safe
place where only authorized users have
access. If you lose or forget your keycode,
you will need to contact your nearest
Sharp Authorized Projector Dealer or Ser-
vice Center (see page
96
). You may need
to bring your projector to them to restore
the projector to original factory condition
(password and keycode reset).
the projector to original factory condition
(password and keycode reset).
1
Press any button you like on
the remote control or projec-
tor to set the first digit in “New
Code”.
the remote control or projec-
tor to set the first digit in “New
Code”.
Note
• The following buttons on the remote
control and projector cannot be set
as keycodes:
• POWER (ON/OFF) buttons
as keycodes:
• POWER (ON/OFF) buttons
• ENTER button
• UNDO button
• MENU button
• FORWARD button
• BACK button
PG-C45X#E_PDF#p71_78.p65
03.2.17, 11:39 AM
75
-76
-76
Setting the Anti-Theft
2
Enter the remaining 3 digits by
pressing any buttons you like.
pressing any buttons you like.
3
Enter the same keycode once
more in “Reconfirm”.
more in “Reconfirm”.
Note
• The Keylock function will become
temporarily disabled.
When “Anti-Theft” is set, the keycode
inputting box appears after the power
is turned on. When it appears, enter the
right keycode.
inputting box appears after the power
is turned on. When it appears, enter the
right keycode.
• Press the buttons on the remote control if
the buttons on the remote control are used
for setting the keycode. In the same manner,
press the buttons on the projector if the
buttons on the projector are used for setting
the keycode.
for setting the keycode. In the same manner,
press the buttons on the projector if the
buttons on the projector are used for setting
the keycode.
Changing the Keycode
••••• When “Anti-Theft” is selected, the password
input box is displayed. After the password has
been entered, you can change the keycode.
been entered, you can change the keycode.
Select “Anti-Theft” in the “Options (2)”
menu on the menu screen.
menu on the menu screen.
➝ For operating the menu screen, see
pages
pages
42 to 45
.
1
Press the buttons on the re-
mote control or the projector
to enter the preset 4-digit
keycode in “Old Code”.
mote control or the projector
to enter the preset 4-digit
keycode in “Old Code”.
2
Press any button you like on
the remote control or the pro-
jector to enter the new keycode.
the remote control or the pro-
jector to enter the new keycode.
3
Enter the same 4-digit keycode
in “Reconfirm”.
in “Reconfirm”.
Note
• If you do not want to set a keycode, leave
the keycode field blank in steps 2 and 3
and press
and press
.
PG-C45X#E_PDF#p71_78.p65
03.2.17, 11:39 AM
76
Click on the first or last page to see other XG-C50XE (serv.man27) service manuals if exist.