DOWNLOAD Sharp XG-C430X (serv.man3) Service Manual ↓ Size: 1.96 MB | Pages: 45 in PDF or view online for FREE

Save set values and quit menu.

1

1

1

1

1 Enter “s” and press the “Enter” key.
2

2

2

2

2 Enter “y” and press the “Enter” key.

▼SETUP MENU

---------------------------------SETUP MENU--------------------------------
[1]IP Address

[2]Subnet Mask

[3]Default Gateway

[4]User Name

[5]Password

[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup

[D]Disconnect All

[V]View All Setting

[S]Save & Quit

[Q]Quit Unchanged

setup>s
All Connection will be disconnect.
Continue(y/n)? y
Apply New setting...Done.

1

2

Quit menu without saving setting values.

1

1

1

1

1 Enter “q” and press the “Enter” key.
2

2

2

2

2 Enter “y” and press the “Enter” key.

▼SETUP MENU

---------------------------------SETUP MENU--------------------------------
[1]IP Address

[2]Subnet Mask

[3]Default Gateway

[4]User Name

[5]Password

[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup

[D]Disconnect All

[V]View All Setting

[S]Save & Quit

[Q]Quit Unchanged

setup>q
Quit Without Saving(y/n)? y
Setting Unchanged.

1
2

Setting of IP address.

1

1

1

1

1 Enter “1” and press the “Enter” key.
2

2

2

2

2 Enter numerical value to be set and press the

“Enter” key.
Display IP address after change (*).

Setting subnet mask.

1

1

1

1

1 Enter “2” and press the “Enter” key.
2

2

2

2

2 Enter numerical value to be set and press the

“Enter” key.
Display subnet mask after change (*).

setup>1
IP Address

:192.168.150.2

Please Enter

:192.168.150.3

(change)      —>

 192.168.150.3

1

2

*

setup>2
Subnet Mask

:255.255.255.0

Please Enter

:255.0.0.0

(change)      —>

 255.0.0.0

1

2

*

Setting default gateway.

1

1

1

1

1 Enter “3” and press the “Enter” key.
2

2

2

2

2 Enter numerical value to be set and press the

“Enter” key.
Display gateway address after change (*).

Note

• If the values for IP Address, Subnet Mask or Gate-

way of the projector have been changed via Telnet,
the computer cannot be connected to the projector
depending on the computer’s network settings.

Carrying out security protection using user name.

1

1

1

1

1 Enter “4” and press the “Enter” key.
2

2

2

2

2 Enter user name and press the “Enter” key.

Display set user name (*).

Note

• User name can be up to 8 characters.
• You can input the characters below :

a-z, A-Z, 0-9, -, _

• In the default state, user name is not set.

setup>3
note: “0.0.0.0” means “Using no default gateway.”
Gateway Address :0.0.0.0
Please Enter

:192.168.150.1

(change)          —>  192.168.150.1

1

2

*

setup>4
User Name

:

Please Enter

: XX-XXXX

(change)        —>   XX-XXXX

1

2

*

Carrying out security protection using password.

1

1

1

1

1 Enter “5” and press the “Enter” key.
2

2

2

2

2 Enter password and press the “Enter” key.

Display set password (*).

Note

• Password can be up to 8 characters.
• You can input the characters below :

a-z, A-Z, 0-9, -, _

• In the default state, the password is not set.

Setting of baud rate for RS-232C terminals.

1

1

1

1

1 Enter “6” and press the “Enter” key.
2

2

2

2

2 Select and enter the number 0, 1 or 2 and

press the “Enter” key.
Display set baud rate (*).

Note

• Set the projector’s baud rate to the same rate as

that used by the computer.

setup>5
Password

:

Please Enter

: sharppj

(change)        —>   sharppj

1

2

*

It is possible to assign a projector name.

1

1

1

1

1 Enter “7” and press the “Enter” key.
2

2

2

2

2 Enter projector name.

Display set projector name (*).

Note

• Projector name can be up to 12 characters.
• You can input the characters below :

A-Z, 0-9, -, _, (,), space
(When “a-z” are input, they are converted to “A-Z”
automatically.)

• It  is  the  same as the name which can be con-

firmed or set, using RS-232C commands “PJN0”,
“PJN1”, “PJN2” and “PJN3”.

Setting DHCP Client to “ON” or “OFF”.

Example: When setting DHCP Client to “ON”

1

1

1

1

1 Enter “8” and press the “Enter” key.
2

2

2

2

2 Enter “1” and press the “Enter” key.

Display the obtained values (*).

setup>6

0 ... 

9600 bps

1 ...   38400 bps
2 ... 115200 bps
Baud Rate Select[0-2] :2
RS-232C Baud Rate : 115200 bps

1

2

*

setup>7
Projector Name

: XX-XXXX

Please Enter

: MY XX-XXXX

(change)       —>

  MY XX-XXXX

1

2

*

setup>8
note: It sets DHCP Client.
0 ... OFF
1 ... ON
DHCP Select[0-1] : 1
DHCP Client : ON

Success get data from DHCP server.
[MAC Address       ] : [08:00:1F:B1:B7:74]
[IP Address           ] : [192.168.150.2]
[Subnet Mask        ] : [255.255.255.0]
[Default Gateway   ] : [0.0.0.0]
[DHCP IP Address] : [192.168.150.1]

1

2

*

It is possible to disconnect all the TCP/IP connec-
tions currently recognized by the projector. Even if
the COM Redirect port is fixed in the Busy status
due to a problem, it is possible to force the Ready
status back by carrying out this disconnection.

1

1

1

1

1 Enter “d” and press the “Enter” key.
2

2

2

2

2 Enter “y” and press the “Enter” key.

Note

• If Disconnect All is performed, the connection to

the projector via network will be forcibly discon-
nected.

Enters ADVANCED SETUP MENU.

1

1

1

1

1 Enter “a” and press the “Enter” key.

If there is no input after a fixed time, the projector
automatically disconnects network connection using
the Auto Logout function. It is possible to set the time
until the projector is automatically disconnected in
units of a minute (from 1 to 65535 minutes).

1

1

1

1

1 Enter “1” and press the “Enter” key.
2

2

2

2

2 Enter numerical value and press the “Enter” key.

Display set numerical value (*).

Note

• If the set value is made 0, the Auto Logout func-

tion is disabled.

• If an invalid number is entered, an error message

(“Parameter Error!”) will be displayed and the
screen returns to the ADVANCED SETUP MENU.

Setting of TCP port number. It is possible to set in
the range of 1025 to 65535.

1

1

1

1

1 Enter “2” and press the “Enter” key.
2

2

2

2

2 Enter numerical value and press the “Enter” key.

Display set numerical value (*).

Note

• Set according to need. Normally, use with the fac-

tory default setting.

setup>d
Disconnect All Connections(y/n)?y
Now Disconnecting...

1
2

setup>a
******************** ADVANCED SETUP MENU ***********************
[1]Auto Logout Time

[2]Data Port

[5]Network Ping Test
[6]Accept IP Addr(1)

[7]Accept IP Addr(2)

[8]Accept IP Addr(3)

[9]Accept All IP Addr

[0]Search Port

[!]Restore Default Setting
[Q]Return to Main Menu

advanced>

1

advanced>1
Valid range

: 0 to 65535 (minute)

note: if you enter “0”, auto logout function will be disable.
Auto Logout Time : 5
Please Enter

:15

(change)        —>  15

1

2

*

advanced>2
Valid range

:1025 to 65535

Data Port

:10002

Please Enter

:10005

(change)          —>  10005

1

2

*