Sharp XG-C430X (serv.man3) User Manual / Operation Manual ▷ View online
-17
RS-232C Specifications and Commands
PJLink
TM
Compliant:
This product conforms with the PJLink standard Class 1 and all Class 1 commands are implemented.
This product confirms with the PJLink standard specification version 1.00.
This product confirms with the PJLink standard specification version 1.00.
CONTROL CONTENTS
Power ON
Standby mode
(or 40-second startup time)
COMMAND PARAMETER
RETURN
Internal Speaker : Off
Internal Speaker : On
Audio Out : FAO
Audio Out : VAO
PRJ Mode : Reverse Off
PRJ Mode : Reverse On
PRJ Mode : Invert Off
PRJ Mode : Invert On
Fan Mode : Normal
Fan Mode : High
Monitor Out : Disable
Monitor Out : Enable
LAN/RS232C : Disable
LAN/RS232C : Enable
Language Selection : ENGLISH
Language Selection : DEUTSCH
Language Selection : ESPAÑOL
Language Selection : NEDERLANDS
Language Selection : FRANÇAIS
Language Selection : ITALIANO
Language Selection : SVENSKA
Language Selection :
Language Selection : PORTUGUÊS
Language Selection :
Language Selection :
Lamp Timer Reset *4
A S P K _ _ _ 0
A S P K _ _ _ 1
A O U T _ _ _ 1
A O U T _ _ _ 2
I M R E _ _ _ 0
I M R E _ _ _ 1
I M I N _ _ _ 0
I M I N _ _ _ 1
H L M D _ _ _ 0
H L M D _ _ _ 1
M O U T _ _ _ 0
M O U T _ _ _ 1
L N R S _ _ _ 0
L N R S _ _ _ 1
M E L A _ _ _ 1
M E L A _ _ _ 2
M E L A _ _ _ 3
M E L A _ _ _ 4
M E L A _ _ _ 5
M E L A _ _ _ 6
M E L A _ _ _ 7
M E L A _ _ _ 8
M E L A _ _ _ 9
M E L A _ _ 1 0
M E L A _ _ 1 1
L P R E 0 0 0 1
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
ERR
OK or ERR
*4 Lamp Timer Reset command is available only in standby mode.
-18
Page 19
1.
Connecting the projector to a computer
Setting up the Projector Network Environment
This section describes the basic procedure for using the projector via the network.
If the network is already constructed, the projector’s network settings may need to be changed. Please
consult your network administrator for assistance with these settings.
You can make network settings both on the projector and on the computer. The following procedure is for
making settings on the computer.
Network settings on the computer
Connect a LAN cable (Category 5, cross-over type) between the computer and projector.
Pages 20, 21
2.
Setting an IP address for the computer
Adjust the IP settings of the computer to enable one-to-one communications with the projector.
3.
Setting up a network connection for the projector
Adjust the projector network settings to conform to your network.
LAN cable
(commercially available)
Use Internet Explorer
(version 5.0 or later)
to make various
projector settings.
(version 5.0 or later)
to make various
projector settings.
Temporarily change
the computer’s IP
address.
the computer’s IP
address.
• Microsoft
®
and Windows
®
are registered trademarks of Microsoft Corporation in the United States and/or
other countries.
• All other company or product names are trademarks or registered trademarks of their respective compa-
nies.
Pages 22, 23
-19
Setting up the Projector Network Environment
1. Connecting the Pro-
jector to a Computer
Establishing a one-to-one connection from the
projector to a computer. Using a LAN cable
(Category 5, cross-over type) you can config-
ure the projector via the computer.
projector to a computer. Using a LAN cable
(Category 5, cross-over type) you can config-
ure the projector via the computer.
1
Disconnect the computer’s LAN
cable from the existing network.
cable from the existing network.
2
Connect a LAN cable (a UTP
cable, Category 5, cross-over
type) to the projector’s LAN ter-
minal and connect the other end
of the cable to the computer’s
LAN terminal.
cable, Category 5, cross-over
type) to the projector’s LAN ter-
minal and connect the other end
of the cable to the computer’s
LAN terminal.
3
Plug the power cord into the AC
socket of the projector.
socket of the projector.
4
Turn on the computer.
Info
Confirm that the LINK LED on the rear of the
projector illuminates. If the LINK LED does not
illuminate, check the following :
projector illuminates. If the LINK LED does not
illuminate, check the following :
• The LAN cable is properly connected.
• The power switches of both the projector
• The power switches of both the projector
and the computer are on.
LAN cable
(cross-over type, commercially available)
ON
A LAN cable being
connected to the network
connected to the network
This completes the connection. Now proceed to “2. Setting an IP Address for the Com-
puter”.
puter”.
-20
Setting up the Projector Network Environment
2. Setting an IP Address
for the Computer
The following describes how to make settings
in Windows
in Windows
®
XP (Professional or Home Edi-
tion).
1
Log on the network using the
administrator’s account for the
computer.
administrator’s account for the
computer.
2
Click “Start”, and click “Control
Panel”.
Panel”.
3
Click “Network and Internet Con-
nections”, and click “Network
Connections” in the new window.
nections”, and click “Network
Connections” in the new window.
• This manual uses examples to explain
the operations in Category View. If you
are using Classic View, double-click
“Network Connections”.
are using Classic View, double-click
“Network Connections”.
4
Right-click “Local Area Connec-
tion” and select “Properties”
from the menu.
tion” and select “Properties”
from the menu.
1
2
1
2
1
2
Click on the first or last page to see other XG-C430X (serv.man3) service manuals if exist.