DOWNLOAD Sharp XG-C430X (serv.man3) Service Manual ↓ Size: 1.96 MB | Pages: 45 in PDF or view online for FREE

Model
XG-C430X (serv.man3)
Pages
45
Size
1.96 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Setup Manual
File
xg-c430x-sm3.pdf
Date
PREV: Sharp XG-C430X (serv.man2) User Manual / Operation Manual

Sharp XG-C430X (serv.man3) User Manual / Operation Manual ▷ View online

-13
Computer control
A computer can be used to control the projector by connecting an RS-232C serial control cable (cross type,
commercially available) to the projector. (See page 27 of the projector’s operation manual for connection.)
Communication conditions
Set the serial port settings of the computer to match that of the table.
Signal format: Conforms to RS-232C standard.
Parity bit: None
Baud rate*: 9,600 bps / 38,400 bps / 115,200 bps
Stop bit: 1 bit
Data length: 8 bits
Flow control: None
*Set the projector’s baud rate to the same rate as used by the computer.
Basic format
Commands from the computer are sent in the following order: command, parameter, and return code. After
the projector processes the command from the computer, it sends a response code to the computer.
Info
• When controlling the projector using RS-232C commands from a computer, wait for at least 40 seconds
after the power has been turned on, and then transmit the commands.
• After sending an input selection or picture adjustment command and then receiving an “OK” response
code, the projector may take some time to process the command. If a second command is sent while the
projector is still processing the first command, you may receive an “ERR” response code. If this happens,
try resending the second command.
• When more than one code is being sent, send each command only after the response code for the previ-
ous command from the projector is verified.
• “POWR????” “TABN _ _ _ 1” “TLPS _ _ _ 1” “TPOW _ _ _ 1” “TLPN _ _ _ 1” “TLTT _ _ _ 1” “TLTL _ _ _ 1”
“TNAM _ _ _ 1” “MNRD _ _ _ 1” “PJN0 _ _ _ 1”
When the projector receives a command shown above:
* The on-screen display will not disappear.
* The “Auto Power Off” timer will not be reset.
Return code (
0DH
)
C1    C2    C3   C4    P1    P2    P3    P4
Response code format
Normal response
Problem response (communication error or incorrect command)
O      K
 E      R      R
Command 4-digit
Parameter 4-digit
Command format
Return code (
0DH
)
Return code (
0DH
)
RS-232C Specifications and Commands
Note
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears in the parameter column, enter a value in the range indicated in brackets under
Control Contents.
*1 Serial No. Check command is used to read out the 12 digits of serial No..
*2 For setting the projector name, send the commands in the order of PJN1, PJN2 and PJN3.
*3 Parameters of CLR Temp settings are as follows.
CLR Temp
5500K
6500K
7500K
Parameter
_0 5 5
_0 6 5
_0 7 5
CLR Temp
8500K
9300K
10500K
Parameter
_0 8 5
_0 9 3
_1 0 5
-14
RS-232C Specifications and Commands
Commands
Example: When turning on the projector, make the following setting.
→
←
P
O
W
R
_
1
_
_
O
K
Projector
Computer
CONTROL CONTENTS
Power ON
Standby mode
(or 40-second startup time)
COMMAND PARAMETER
RETURN
Power Off
Power On
Power Status
Projector Condition
Lamp Status
Lamp Power Status
Lamp Quantity
Lamp Usage Time (Hour)
Lamp Life (Percentage)
Model Name Check
Model Name Check
Serial No. Check *1
Projector Name Setting 1 (First four characters) *2
Projector Name Setting 2 (Middle four characters) *2
Projector Name Setting 3 (Last four characters) *2
Projector Name Check
COMPUTER 1 (RGB1)
COMPUTER 2 (RGB2)
DVI (RGB3)
INPUT RGB Check
S-VIDEO (Video1)
VIDEO (Video2)
INPUT Video Check
INPUT Mode Check
INPUT Check
All Reset
Volume (0 - 60)
Volume up / down (– 10 - + 10)
Keystone (– 127 -  + 127)
AV Mute Off
AV Mute On
Freeze Off
Freeze On
Eco/Quiet Mode : Off
Eco/Quiet Mode : On
Auto Sync Start
COMPUTER 1 Resize : Normal
COMPUTER 1 Resize : Stretch
COMPUTER 1 Resize : Dot By Dot
COMPUTER 1 Resize : Full
COMPUTER 1 Resize : Border
COMPUTER 2 Resize : Normal
COMPUTER 2 Resize : Stretch
COMPUTER 2 Resize : Dot By Dot
COMPUTER 2 Resize : Full
COMPUTER 2 Resize : Border
DVI Resize : Normal
DVI Resize : Stretch
DVI Resize : Dot By Dot
DVI Resize : Full
DVI Resize : Border
P O W R _ _ _ 0
P O W R _ _ _ 1
P O W R ? ? ? ?
T A B N _ _ _ 1
T L P S _ _ _ 1
T P O W _ _ _ 1
T L P N _ _ _ 1
T L T T _ _ _ 1
T L T L _ _ _ 1
T N A M _ _ _ 1
M N R D _ _ _ 1
S N R D _ _ _ 1
P J N 1 * * * *
P J N 2 * * * *
P J N 3 * * * *
P J N 0 _ _ _ 1
I R G B _ _ _ 1
I R G B _ _ _ 2
I R G B _ _ _ 3
I R G B ? ? ? ?
I V E D _ _ _ 1
I V E D _ _ _ 2
I V E D ? ? ? ?
I M O D ? ? ? ?
I C H K ? ? ? ?
A L R E _ _ _ 1
V O L A _ _ * *
V O U D _ * * *
K E Y S _ * * *
I M B K _ _ _ 0
I M B K _ _ _ 1
F R E Z _ _ _ 0
F R E Z _ _ _ 1
T H M D _ _ _ 0
T H M D _ _ _ 1
A D J S _ _ _ 1
R A S R _ _ _ 1
R A S R _ _ _ 2
R A S R _ _ _ 3
R A S R _ _ _ 5
R A S R _ _ _ 6
R B S R _ _ _ 1
R B S R _ _ _ 2
R B S R _ _ _ 3
R B S R _ _ _ 5
R B S R _ _ _ 6
R C S R _ _ _ 1
R C S R _ _ _ 2
R C S R _ _ _ 3
R C S R _ _ _ 5
R C S R _ _ _ 6
OK or ERR 
OK
OK 
OK or ERR
1 0
0:Normal
0:Normal
1:Temp High
1:Temp High
8:Lamp Life 5% or less
2:Fan Error
16:Lamp Burnt-out
4:Cover Open
32:Lamp Ignition Failure
8:Lamp Life 5% or less
16:Lamp Burnt-out
32:Lamp Ignition Failure
64:Temp Abnormally High
0:Off, 1:On, 2:Retry, 3:Waiting, 4:Lamp Error 
0:Off, 4:Lamp Error
1:On, 2:Cooling 
0:Standby
1 
0 - 9999 (Integer) 
0% - 100% (Integer) 
XGC430X / XGC330X 
XG-C430X / XG-C330X 
Serial No. 
OK or ERR 
OK or ERR 
OK or ERR 
Projector Name 
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
1:RGB1(COMPUTER1), 2:RGB2(COMPUTER2), ERR
3:RGB3(DVI) or ERR 
OK or ERR 
ERR
OK or ERR 
ERR
1:S-Video, 2:Video or ERR 
ERR
1:RGB, 2:Video 
ERR
1:COMPUTER1, 2:COMPUTER2, 3:DVI, 
ERR
4:S-Video, 5:Video 
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
-15
RS-232C Specifications and Commands
CONTROL CONTENTS
Power ON
Standby mode
(or 40-second startup time)
COMMAND PARAMETER
RETURN
S-Video Resize : Normal
S-Video Resize : Stretch
S-Video Resize : Border
S-Video Resize : Area Zoom
S-Video Resize : V-Stretch 
Video Resize : Normal
Video Resize : Stretch
Video Resize : Border
Video Resize : Area Zoom
Video Resize : V-Stretch
COMPUTER 1 Adjustment Reset
COMPUTER 2 Adjustment Reset
DVI Adjustment Reset
S-VIDEO Adjustment Reset
VIDEO Adjustment Reset
COMPUTER 1 Picture Mode : Standard
COMPUTER 1 Picture Mode : Presentation
COMPUTER 1 Picture Mode : Movie
COMPUTER 1 Picture Mode : Game
COMPUTER 1 Picture Mode : sRGB
COMPUTER 1 Contrast (– 30 - + 30)
COMPUTER 1 Bright (– 30 - + 30)
COMPUTER 1 Color (– 30 - + 30)
COMPUTER 1 Tint (– 30 - + 30)
COMPUTER 1 Red (– 30 - 30)
COMPUTER 1 Blue (– 30 - + 30)
COMPUTER 1 Sharp (– 30 - + 30)
COMPUTER 1 CLR Temp *3
COMPUTER 1 Progressive : 2D
COMPUTER 1 Progressive : 3D
COMPUTER 1 Signal Type : Auto
COMPUTER 1 Signal Type : RGB
COMPUTER 1 Signal Type : Component
COMPUTER 2 Picture Mode : Standard
COMPUTER 2 Picture Mode : Presentation
COMPUTER 2 Picture Mode : Movie
COMPUTER 2 Picture Mode : Game
COMPUTER 2 Picture Mode : sRGB
COMPUTER 2 Contrast (– 30 - + 30)
COMPUTER 2 Bright (– 30 - + 30)
COMPUTER 2 Color (– 30 - + 30)
COMPUTER 2 Tint (– 30 - + 30)
COMPUTER 2 Red (– 30 - + 30)
COMPUTER 2 Blue (– 30 - + 30)
COMPUTER 2 Sharp (– 30 - + 30)
COMPUTER 2 CLR Temp *3
COMPUTER 2 Progressive : 2D
COMPUTER 2 Progressive : 3D
COMPUTER 2 Signal Type : Auto
COMPUTER 2 Signal Type : RGB
COMPUTER 2 Signal Type : Component
DVI Picture Mode : Standard
DVI Picture Mode : Presentation
DVI Picture Mode : Movie
DVI Picture Mode : Game
DVI Picture Mode : sRGB
DVI Contrast (– 30 - + 30)
DVI Bright (– 30 - + 30)
DVI Color (– 30 - + 30)
DVI Tint (– 30 - + 30)
DVI Red (– 30 - + 30)
DVI Blue (– 30 - + 30)
DVI Sharp (–30 - 30)
DVI CLR Temp *3
R A S V _ _ _ 1
R A S V _ _ _ 2
R A S V _ _ _ 3
R A S V _ _ 1 0
R A S V _ _ 1 1
R B S V _ _ _ 1
R B S V _ _ _ 2
R B S V _ _ _ 3
R B S V _ _ 1 0
R B S V _ _ 1 1
R A R E _ _ _ 1
R B R E _ _ _ 1
R C R E _ _ _ 1
V A R E _ _ _ 1
V B R E _ _ _ 1
R A P S _ _ 1 0
R A P S _ _ 1 1
R A P S _ _ 1 2
R A P S _ _ 1 3
R A P S _ _ 1 4
R A P I _ * * *
R A B R _ * * *
R A C O _ * * *
R A T I _ * * *
R A R D _ * * *
R A B E _ * * *
R A S H _ * * *
R A C T _ * * *
R A I P _ _ _ 0
R A I P _ _ _ 1
I A S I _ _ _ 0
I A S I _ _ _ 1
I A S I _ _ _ 2
R B P S _ _ 1 0
R B P S _ _ 1 1
R B P S _ _ 1 2
R B P S _ _ 1 3
R B P S _ _ 1 4
R B P I _ * * *
R B B R _ * * *
R B C O _ * * *
R B T I _ * * *
R B R D _ * * *
R B B E _ * * *
R B S H _ * * *
R B C T _ * * *
R B I P _ _ _ 0
R B I P _ _ _ 1
I B S I _ _ _ 0
I B S I _ _ _ 1
I B S I _ _ _ 2
R C P S _ _ 1 0
R C P S _ _ 1 1
R C P S _ _ 1 2
R C P S _ _ 1 3
R C P S _ _ 1 4
R C P I _ * * *
R C B R _ * * *
R C C O _ * * *
R C T I _ * * *
R C R D _ * * *
R C B E _ * * *
R C S H _ * * *
R C C T _ * * *
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR 
ERR
OK or ERR 
ERR
-16
RS-232C Specifications and Commands
CONTROL CONTENTS
Power ON
Standby mode
(or 40-second startup time)
COMMAND PARAMETER
RETURN
DVI Progressive : 2D
DVI Progressive : 3D
DVI Signal Type : D. PC RGB
DVI Signal Type : D. PC Comp.
DVI Signal Type : D. Video RGB
DVI Signal Type : D. Video Comp.
DVI Dynamic Range : Standard
DVI Dynamic Range : Enhanced
S-Video Picture Mode : Standard
S-Video Picture Mode : Presentation
S-Video Picture Mode : Movie
S-Video Picture Mode : Game
S-Video Contrast (– 30 - + 30)
S-Video Bright (– 30 - + 30)
S-Video Color (– 30 - + 30)
S-Video Tint (– 30 - + 30)
S-Video Red (– 30 - + 30)
S-Video Blue (– 30 - + 30)
S-Video Sharp (–30 - + 30)
S-Video CLR Temp *3
S-Video Progressive : 2D
S-Video Progressive : 3D
Video Picture Mode : Standard
Video Picture Mode : Presentation
Video Picture Mode : Movie
Video Picture Mode : Game
Video Contrast (– 30 - + 30)
Video Bright (– 30 - + 30)
Video Color (– 30 - + 30)
Video Tint (– 30 - + 30)
Video Red (– 30 - + 30)
Video Blue (– 30 - + 30)
Video Sharp (– 30 - + 30)
Video CLR Temp *3
Video Progressive : 2D
Video Progressive : 3D
Video System Selection : AUTO
Video System Selection : PAL
Video System Selection : SECAM
Video System Selection : NTSC4.43
Video System Selection : NTSC3.58
Video System Selection : PAL_M
Video System Selection : PAL_N
Video System Selection : PAL-60
Clock (– 150 - + 150)
Phase (– 30 - + 30)
H-Position (– 150 - + 150)
V-Position (– 60 - + 60)
Fine Sync Adjustment Reset
Auto Sync : Off
Auto Sync : On
RGB Horizontal Frequency Check
RGB Vertical Frequency Check
Image Shift (– 96 - + 96)
Auto Keystone : Off
Auto Keystone : On
OSD Display : Off
OSD Display : On
Background Selection : Logo
Background Selection : Blue
Background Selection : None
Auto Power Off : Off
Auto Power Off : On
System Sound : Off
System Sound : On
Direct Power On : Disable
Direct Power On : Enable
R C I P _ _ _ 0
R C I P _ _ _ 1
I C S I _ _ _ 3
I C S I _ _ _ 4
I C S I _ _ _ 5
I C S I _ _ _ 6
H M C D _ _ _ 1
H M C D _ _ _ 2
V A P S _ _ 1 0
V A P S _ _ 1 1
V A P S _ _ 1 2
V A P S _ _ 1 3
V A P I _ * * *
V A B R _ * * *
V A C O _ * * *
V A T I _ * * *
V A R D _ * * *
V A B E _ * * *
V A S H _ * * *
V A C T _ * * *
V A I P _ _ _ 0
V A I P _ _ _ 1
V B P S _ _ 1 0
V B P S _ _ 1 1
V B P S _ _ 1 2
V B P S _ _ 1 3
V B P I _ * * *
V B B R _ * * *
V B C O _ * * *
V B T I _ * * *
V B R D _ * * *
V B B E _ * * *
V B S H _ * * *
V B C T _ * * *
V B I P _ _ _ 0
V B I P _ _ _ 1
M E S Y _ _ _ 1
M E S Y _ _ _ 2
M E S Y _ _ _ 3
M E S Y _ _ _ 4
M E S Y _ _ _ 5
M E S Y _ _ _ 6
M E S Y _ _ _ 7
M E S Y _ _ _ 8
I N C L * * * *
I N P H _ * * *
I A H P * * * *
I A V P _ * * *
I A R E _ _ _ 1
A A D J _ _ _ 0
A A D J _ _ _ 1
T F R Q _ _ _ 1
T F R Q _ _ _ 2
L N D S _ * * *
A T K S _ _ _ 0
A T K S _ _ _ 1
I M D I _ _ _ 0
I M D I _ _ _ 1
I M B G _ _ _ 1
I M B G _ _ _ 3
I M B G _ _ _ 4
A P O W _ _ _ 0
A P O W _ _ _ 1
S S N D _ _ _ 0
S S N D _ _ _ 1
D P O W _ _ _ 0
D P O W _ _ _ 1
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR
ERR
OK or ERR
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
x10
-1
kHz (***.* or ERR) 
ERR
Hz (*** or ERR) 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
OK or ERR 
ERR
Page of 45
Display

Click on the first or last page to see other XG-C430X (serv.man3) service manuals if exist.

RANDOM: