Sharp PG-MB60X (serv.man28) User Manual / Operation Manual ▷ View online
-57
Useful Features
Setting the Audio Output
Type
Type
This function determines whether the audio level
output from the AUDIO OUTPUT terminal is fixed
or variable by linking with VOLUME.
output from the AUDIO OUTPUT terminal is fixed
or variable by linking with VOLUME.
Menu operation
Page
42
Example: “Options2” screen menu
Description of Audio Out Settings
Info
• When “Audio Out” has been set to “VAO”, first make
sure to lower the volume of the projector before
turning the power on or off and when switching the
input.
turning the power on or off and when switching the
input.
Description
Audio output that does not vary in
strength with the volume level of the
source projector.
Audio output that varies in strength with
the volume level of the source projector.
strength with the volume level of the
source projector.
Audio output that varies in strength with
the volume level of the source projector.
Selectable items
FAO
(Fixed Audio
Output)
VAO
(Variable
Audio Output)
FAO
(Fixed Audio
Output)
VAO
(Variable
Audio Output)
Reversing/Inverting Pro-
jected Images
jected Images
This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.
image function that allows you to reverse or in-
vert the projected image for various applications.
Menu operation
Page
42
Example: “Options2” screen menu
Description of PRJ Modes
Note
• This function is used for the reversed image and
ceiling-mount setups. (See page
20
.)
Description
Normal image
Inverted image
Reversed image
Reversed and inverted image
Selectable items
Front
Ceiling + Front
Rear
Ceiling + Rear
-58
Selecting the Transmis-
sion Speed (RS-232C)
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
are set for the same baud rate.
Menu operation
Page
42
Example: “Options2” screen menu
Description of RS-232C
Note
• Refer to the “SETUP GUIDE” contained on the
supplied CD-ROM for RS-232C Specifications
and Command Settings.
and Command Settings.
• Refer to the computer’s operation manual for
instructions for setting the computer’s baud rate.
Description
Transmission speed is slow.
Transmission speed is rapid.
Selectable items
9600 bps
115200 bps
Monitor Output Settings
When the Monitor Out has been set to “Enable”,
the monitor output is activated and power is con-
sumed even in the standby mode. It is recom-
mended that the Monitor Out be set to “Disable”
when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
the monitor output is activated and power is con-
sumed even in the standby mode. It is recom-
mended that the Monitor Out be set to “Disable”
when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
Menu operation
Page
42
Example: “Options2” screen menu
Description of Monitor Out
Description
The monitor output function is activated
even if the projector is in standby mode.
The monitor output function is switched off
when the projector is in standby mode.
even if the projector is in standby mode.
The monitor output function is switched off
when the projector is in standby mode.
Selectable items
Enable
Disable
Helpful Functions Set during Installation (“Options2” menu)
-59
Useful Features
Returning to the Default
Settings
Settings
This function allows you to initialize the settings
you have made in the projector.
you have made in the projector.
Menu operation
Page
42
Example: “Options2” screen menu
Note
The following items or menu cannot be initialized.
• “Fine Sync” menu
• “Fine Sync” menu
Special Modes
• “Options1” menu
Lamp Timer (Life)
System Lock
System Lock
• “Language” menu
-60
Selecting the On-screen
Display Language
Display Language
The projector can switch the on-screen display
language among 11 languages: English, German,
Spanish, Dutch, French, Italian, Swedish, Portu-
guese, Chinese, Korean or Japanese.
language among 11 languages: English, German,
Spanish, Dutch, French, Italian, Swedish, Portu-
guese, Chinese, Korean or Japanese.
Example: “Language” screen menu for
INPUT 1 (RGB) mode
1
Press
on the remote control.
• The “Picture” menu will be displayed.
2
Press \ or | to select the “Lan-
guage” menu icon (
guage” menu icon (
).
• The “Language” menu will be displayed.
3
Press ' or " to select the desired
language, and then press
.
• The language you selected will be set as
the on-screen display.
4
Press
.
• The “Language” menu will disappear.
Note
• This procedure can also be performed by using
the buttons on the projector.
Using the “Language” Menu
ENTER
button
button
MENU button
MOUSE/Adjustment
button (
button (
'
/
"
/
\
/
|
)
Click on the first or last page to see other PG-MB60X (serv.man28) service manuals if exist.