Sharp PG-MB60X (serv.man28) User Manual / Operation Manual ▷ View online
-45
Useful Features
Emphasizing the Contrast
This function emphasizes the bright portions of
images to obtain a higher contrast image.
images to obtain a higher contrast image.
Menu operation
Page
40
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of Bright Boost Setting
Note
• “Bright Boost” cannot be set when “sRGB” is
set to “
” (ON).
Adjusting the Color Temperature
Menu operation
Page
42
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of Color Temperature Settings
Note
• Values on “CLR Temp” are only for general stan-
dard purposes.
• “CLR Temp” cannot be set when “sRGB” is set
to “
” (ON).
Selectable items
5500K
6500K
7500K
8500K
9300K
10500K
5500K
6500K
7500K
8500K
9300K
10500K
Description
For lower color temperature for warmer,
reddish incandescent-like images.
reddish incandescent-like images.
For higher color temperature for cooler,
bluish, fluorescent-like images.
bluish, fluorescent-like images.
Description
To improve color
reproduction, lower
bright boost setting.
reproduction, lower
bright boost setting.
To increase brightness,
increase bright boost
setting.
increase bright boost
setting.
-46
Picture Adjustment (“Picture” menu)
sRGB Setting
When you want to display the image in a natural
tint based on an original image from the com-
puter, select “sRGB” and set it to “
tint based on an original image from the com-
puter, select “sRGB” and set it to “
” (ON).
Menu operation
Page
42
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Note
• An international standard of color reproduction
regulated by the IEC (International Electrotechnical
Commission). As the fixed color area has been
decided by the IEC, the images are displayed in a
natural tint based on an original image, when
“sRGB” is set to “
Commission). As the fixed color area has been
decided by the IEC, the images are displayed in a
natural tint based on an original image, when
“sRGB” is set to “
” (ON).
• You cannot set the items, “Red”, “Blue”, “CLR
Temp”, “Bright Boost” on the “Picture” menu,
when “sRGB” is set to “
when “sRGB” is set to “
” (ON).
• For additional information about the sRGB func-
tion, visit “http://www.srgb.com/”.
Info
• When “sRGB” is set to “
” (ON), the projected
image may become dark, but this does not indi-
cate a malfunction.
cate a malfunction.
Signal Type Setting
This function allows you to select the input sig-
nal type RGB or Component for INPUT 1 or IN-
PUT 2.
nal type RGB or Component for INPUT 1 or IN-
PUT 2.
Menu operation
Page
42
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of Signal Type Settings
Description
Input signals are automatically recog-
nized as RGB or Component.
Set when RGB signals are received.
Set when Component signals are
received.
nized as RGB or Component.
Set when RGB signals are received.
Set when Component signals are
received.
Selectable items
Auto
RGB
Component
Component
-47
Useful Features
You can adjust the computer image, match the computer display mode, and confirm the
input signal using the “Fine Sync” menu.
input signal using the “Fine Sync” menu.
Computer Image Adjustment (“Fine Sync” menu)
Adjusting the Computer
Image
Image
Use the Fine Sync function in case of irregulari-
ties such as vertical stripes or flickering in por-
tions of the screen.
ties such as vertical stripes or flickering in por-
tions of the screen.
Menu operation
Page
40
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Description of Adjustment Items
Note
• You can automatically adjust the computer im-
age by setting “Auto Sync” on the “Fine Sync”
menu to “
” (ON) or pressing
on the pro-
jector or
on the remote control. See next
page for details.
• To reset all adjustment items, select “Reset” and
press
.
Special Modes Setting
Ordinarily, the type of input signal is detected and
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in “Special Modes” on the “Fine
Sync” menu may need to be selected to match
the computer display mode.
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in “Special Modes” on the “Fine
Sync” menu may need to be selected to match
the computer display mode.
Menu operation
Page
42
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Note
• If your computer displays patterns which repeat
every other line (horizontal stripes), flickering
may occur which makes the image hard to see.
may occur which makes the image hard to see.
• See “Checking the Input Signal” on the next
page for information on the currently selected
input signal.
input signal.
Selectable items
Clock
Phase
Phase
H-Pos
V-Pos
Description
Adjusts vertical noise.
Adjusts horizontal noise (similar to
tracking on your VCR).
Centers the on-screen image by
moving it to the left or right.
Centers the on-screen image by
moving it up or down.
Adjusts horizontal noise (similar to
tracking on your VCR).
Centers the on-screen image by
moving it to the left or right.
Centers the on-screen image by
moving it up or down.
-48
Auto Sync Adjustment
Used to automatically adjust a computer image.
Menu operation
Page
42
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Description of Auto Sync Adjustment
Note
• Auto Sync adjustment is also performed by
pressing
on the projector or
on the re-
mote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page
ments. (See page
47
.)
Checking the Input Signal
Menu operation
Page
42
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Note
• The projector will display the number of scanned
lines available from audio-visual equipment
such as a DVD player or Digital Video.
such as a DVD player or Digital Video.
• The projector will display the resolution when
connecting the computer.
Selectable items
(ON)
(OFF)
Description
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not automati-
cally performed.
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not automati-
cally performed.
Computer Image Adjustment (“Fine Sync” menu)
Click on the first or last page to see other PG-MB60X (serv.man28) service manuals if exist.