DOWNLOAD Sharp PG-MB60X (serv.man28) Service Manual ↓ Size: 6.37 MB | Pages: 78 in PDF or view online for FREE

The projector has a COMPUTER-RGB/COMPONENT terminal, an S-VIDEO terminal and VIDEO terminal for
video input. Refer to the listed illustrations on how to connect audio-visual equipment.
The image quality is highest in order of the component signal, the RGB signal, the S-video signal and the
video signal. If your audio-visual equipment has a component output terminal or RGB output terminal, use the
COMPUTER-RGB/COMPONENT terminal (INPUT 1 or INPUT 2) on the projector for video connection.

(When connecting to INPUT 1)

Note

• ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input.
• When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com-

mercially available cable that fits in the projector terminal you want to connect.

To audio output terminal

ø3.5 mm minijack to RCA
audio cable (commercially
available)

3 RCA (Component) to
15-pin D-sub cable
(optional: AN-C3CP)

To component video output terminal

To INPUT 1 terminal

To AUDIO

INPUT 1, 2 terminal

Video Equipment

Note

• ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input.
• When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com-

mercially available cable that fits in the projector terminal you want to connect.

ø3.5 mm minijack to RCA
audio cable (commercially
available)

To audio output terminal

To S-video output terminal

S-video cable (commercially available)

To INPUT 4 terminal

To AUDIO INPUT 3, 4 terminal

Video Equipment

ø3.5 mm minijack to RCA
audio cable (commercially
available)

To audio output terminal

To video output terminal

Composite video cable (commercially available)

To INPUT 3 terminal

To AUDIO INPUT 3, 4 terminal

Video Equipment

When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS-232C adaptor
(optional: AN-A1RS) and an RS-232C serial control cable (cross type, commercially available), the computer
can be used to control the projector and check the status of the projector. Refer to the “SETUP GUIDE”
contained on the supplied CD-ROM for details.

Note

• The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the

operation manual of the computer for details.

• Refer to page 4 of the “SETUP GUIDE” contained on the supplied CD-ROM for “RS-232C Specifica-

• Do not connect the RS-232C cable to a port other than the RS-232C terminal on the computer. This may

damage your computer or projector.

• Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is on. This

may damage your computer.

Computer

To RS-232C terminal

RS-232C serial control cable (cross type, commercially available)

To RS-232C terminal

DIN-D-sub
RS-232C adaptor
(optional: AN-A1RS)

RGB cable

Supplied

accessory

You can display computer images on both the projector and a separate monitor using two sets of RGB cables.

Note

• RGB signals and Component signals can be output to the monitor.
• For this connection, another RGB cable (commercially available) is required.

Audio signals input from equipment connected to each audio input terminal of the projector can be output to audio equipment.

Note

• ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input.
• Turn off the power of both the projector and audio equipment when connecting.
• When turning off the power in the case of connecting an amplifier or other audio equipment, first turn off

the power of the amplifier and then turn off the power of the projector.

• By using external audio components, the volume can be amplified for better sound.
• For details on Variable Audio Output (VAO) and Fixed Audio Output (FAO), see page 

.

To audio input terminal

ø3.5 mm minijack to 
RCA audio cable
(commercially available)

To AUDIO OUTPUT terminal

Amplifier

To RGB input terminal

RGB cable (commercially available)

RGB cable

To RGB output 
terminal

To INPUT 1 terminal

To OUTPUT(INPUT 1, 2) terminal

Monitor

Computer