Sharp PG-M20X (serv.man28) User Manual / Operation Manual ▷ View online
Basic Operation
-29
"On-screen Display (Example)
➝
➝➝
Using Analog
RGB
RGB
Using
Component
Component
INPUT 2 Mode
Using S-Video
Using S-Video
INPUT 3 Mode
Using Video
Using Video
3
Press
,
or
on the
remote control to select the
INPUT Mode.
INPUT Mode.
• Pressing
on the projector switches
the inputs in the following order:
→ INPUT 1 → INPUT 2 → INPUT 3
Note
• When no signal is received, “NO
SIGNAL” will be displayed. When a
signal that the projector is not pre-
set to receive is received, “NOT
REG.” will be displayed.
signal that the projector is not pre-
set to receive is received, “NOT
REG.” will be displayed.
About the INPUT Modes
Used for projecting im-
ages from equipment that
sends RGB signals or
Component signals con-
nected to the DVI-DIGI-
TAL/ANALOG input port.
ages from equipment that
sends RGB signals or
Component signals con-
nected to the DVI-DIGI-
TAL/ANALOG input port.
Used for projecting im-
ages from equipment
connected to the S-
VIDEO input terminal.
ages from equipment
connected to the S-
VIDEO input terminal.
Used for projecting im-
ages from equipment
connected to the VIDEO
input terminal.
ages from equipment
connected to the VIDEO
input terminal.
INPUT 1
(RGB/
Component)
(RGB/
Component)
INPUT 2
(S-Video)
(S-Video)
INPUT 3
(Video)
(Video)
INPUT 1 Mode
Using
DVI digital
4
Press
or
on the remote
control to adjust the volume of
the speaker.
the speaker.
Note
• Pressing
will raise the volume.
Pressing
will lower the volume.
• On the projector, the volume can be
adjusted by pressing
or
.
•
,
on the projector operate
as cursor buttons (
,
) when
selecting setup or adjustment
functions while adjusting menus or
the lens.
functions while adjusting menus or
the lens.
VOLUME
buttons
buttons
Image Projection (cont.)
POWER
button
button
5
Press
to temporarily turn off
the picture and sound.
Note
• Pressing
again will turn the pic-
ture and the sound back on.
6
Press
, then press
again
while the confirmation message
is displayed, to turn off the pro-
jector.
is displayed, to turn off the pro-
jector.
Note
• If you accidentally pressed
and
do not want to turn off the power,
wait until the confirmation message
disappears.
wait until the confirmation message
disappears.
Info
• Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
• When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
the power to the equipment con-
nected first and then to the projec-
tor.
Selecting the On-screen
Display Language
Display Language
• The on-screen display language of the
projector can be set to English, German,
Spanish, Dutch, French, Italian, Swedish,
Portuguese, Chinese, Korean or Japa-
nese.
Spanish, Dutch, French, Italian, Swedish,
Portuguese, Chinese, Korean or Japa-
nese.
1
Press
.
• The menu will be displayed.
2
Press
or
to select “Lan-
guage”.
AV MUTE button
-30
Basic Operation
-31
Zoom
in
Zoo
m o
ut
3
Press
or
to select the
desired language, and then
press
press
.
4
Press
.
• The desired language will be set as
the on-screen display.
Adjusting the Lens
The image is focused and adjusted to the
desired size using the focus ring or zoom
knob on the projector.
desired size using the focus ring or zoom
knob on the projector.
1
The focus is adjusted by rotat-
ing the focus ring.
ing the focus ring.
2
Zooming is adjusted by mov-
ing the zoom knob.
ing the zoom knob.
Zoom knob
Focus ring
Correcting the Trapezoidal Distortion (
Keystone Correction
)
Correcting the Trap-
ezoidal Distortion
ezoidal Distortion
This function allows for Keystone (On-screen
Trapezoidal Distortion) Correction.
Trapezoidal Distortion) Correction.
Note
• Keystone Correction is the correction for
trapezoidal distortion that occurs when
the image is positioned away from the
center axis of the screen.
the image is positioned away from the
center axis of the screen.
• The trapezoidal distortion can be corrected
up to an angle of approximately ±35 de-
grees.
grees.
1
Press
.
• Pressing
again while the BOR-
DER, STRETCH or SMART STRETCH
screen is displayed will start the Digital
Shift function. See page
screen is displayed will start the Digital
Shift function. See page
33
.
2
Press
or
to ad-
just the Keystone correction.
• If you want to make more detailed cor-
rections, press
to display the test
pattern, and then press
or
to make the adjustments.
Note
• Since the trapezoidal distortion of
the image can be corrected up to
an angle of approximately ±35 de-
grees, the actual screen can be di-
agonally set up to that angle as well.
(For more details on the settings,
see page
an angle of approximately ±35 de-
grees, the actual screen can be di-
agonally set up to that angle as well.
(For more details on the settings,
see page
8
.)
• Press
to cancel Keystone Cor-
rection.
3
Press
.
Note
• You can use the same settings used
in NORMAL mode 4:3 for 16:9.
• Straight lines or the edges of images
may appear jagged while adjusting
the image.
the image.
LENS button
buttons
UNDO button
ENTER
button
button
Normal screen
Keystone Correction screen
Compresses upper side.
Compresses lower side.
Test pattern
-32
Click on the first or last page to see other PG-M20X (serv.man28) service manuals if exist.