Sharp PG-M20X (serv.man28) User Manual / Operation Manual ▷ View online
Setup and Connections
-25
To RGB output port
Connecting to a Monitor
Watching Images on
Both the Projector and
a Monitor
Both the Projector and
a Monitor
You can display computer images on both the
projector and a separate monitor using an RGB
monitor loop-out adaptor and an RGB cable.
projector and a separate monitor using an RGB
monitor loop-out adaptor and an RGB cable.
1
Connect the projector to the
computer and monitor using
an RGB monitor loop-out adap-
tor (sold separately) and an
RGB cable (commercially avail-
able).
computer and monitor using
an RGB monitor loop-out adap-
tor (sold separately) and an
RGB cable (commercially avail-
able).
2
In the “Options(1)” menu, se-
lect “Monitor Out” and then
“Yes (Y cable)”.
lect “Monitor Out” and then
“Yes (Y cable)”.
• If “Disable” is selected, the projected
image will be dimmer. This does not
indicate a malfunction. For details, see
page
indicate a malfunction. For details, see
page
58
.
Note
• When using an RGB monitor loop-out
adaptor (sold separately), make sure that
the cable is connected to the monitor.
the cable is connected to the monitor.
• Analog RGB signals as well as Component
signals can be output to the monitor.
Info
• Only analog RGB/Component signals
entered into the DVI port can be output.
Signals from equipment connected to the
DVI digital port cannot be output.
Signals from equipment connected to the
DVI digital port cannot be output.
Using INPUT 1 Terminal
with the Terminal Cover
Attached to the
Projector
with the Terminal Cover
Attached to the
Projector
The INPUT 1 terminal can be used with the ter-
minal cover folded as shown in the illustra-
tion.
minal cover folded as shown in the illustra-
tion.
Optional
accessory
accessory
RGB monitor loop-out
adaptor
Type: AN-A1MY
(7.9" (20 cm))
adaptor
Type: AN-A1MY
(7.9" (20 cm))
To RGB input port
Monitor
RGB cable
(commercially available)
(commercially available)
1
RGB monitor loop-out adaptor
(sold separately)
(sold separately)
Black: to the monitor
Blue: to the computer
Blue: to the computer
Notebook computer
FORWARD/BACK
button
button
Connecting the Projector to Other Devices (cont.)
Using the Wireless Presentation Function of the
Remote Control
Remote Control
The Wireless Presentation function on the projector works the same as the [Page Up] and
[Page Down] keys on a computer keyboard. It can also be used to move forward or backward
when viewing images of presentation software such as Power Point
[Page Down] keys on a computer keyboard. It can also be used to move forward or backward
when viewing images of presentation software such as Power Point
TM
.
Using the Wireless Pre-
sentation Function
sentation Function
1
Connect the projector to the
computer using the supplied
USB cable.
computer using the supplied
USB cable.
Note
• This function only works with
Microsoft Windows OS and Mac OS.
However, this function does not
work with the following operating
systems that do not support USB.
• Versions earlier than Windows 95.
However, this function does not
work with the following operating
systems that do not support USB.
• Versions earlier than Windows 95.
• Versions earlier than Windows NT 4.0.
• Versions earlier than Mac OS 8.5.
2
Press
while using
presentation software on your
computer.
computer.
• Press FORWARD to move the page
down.
• Press BACK to move the page up.
Supplied
accessory
accessory
USB cable
USB port
Notebook computer
USB cable
-26
Basic Operation
Basic Operation
Image Projection
Basic Procedure
Connect the required external equipment to
the projector before operating the following
procedures.
The language preset at the factory is English.
If you want to change the on-screen display
to another language, reset the language ac-
cording to the procedure on page
the projector before operating the following
procedures.
The language preset at the factory is English.
If you want to change the on-screen display
to another language, reset the language ac-
cording to the procedure on page
30
.
1
Plug the power cord into the
wall outlet.
• The POWER indicator illuminates up
in red, and the projector enters
standby mode.
standby mode.
2
Press
on the projector or
on the remote control.
• The POWER indicator illuminates in
green. After the LAMP REPLACEMENT
indicator illuminates, the projector is
ready to start operation.
indicator illuminates, the projector is
ready to start operation.
Note
• The LAMP REPLACEMENT indica-
tor illuminates, indicating the status
of the lamp.
of the lamp.
Green: The lamp is ready.
Green blinking: The lamp is
Green blinking: The lamp is
warming up.
Red: The lamp should be replaced.
• If the power is turned off and on right
after again, the LAMP REPLACEMENT
indicator may take time to illuminate.
indicator may take time to illuminate.
When “Anti-Theft” is set, the
keycode input box will appear.
keycode input box will appear.
• Enter the keycode.
Note
• When entering the keycode, press
the buttons previously set on the
projector or the remote control.
projector or the remote control.
Info
• When “Anti-Theft” is set, enter the
keycode or the input display will not
appear. Even when the signal is in-
put, the display cannot appear.
appear. Even when the signal is in-
put, the display cannot appear.
▼Projector indicators
LAMP REPLACEMENT indicator
POWER indicator
POWER button
POWER button
INPUT
button
button
MENU
button
button
buttons
ENTER
button
button
INPUT 1/2/3 buttons
MENU button
buttons
ENTER button
▼Keycode input box
-28
Click on the first or last page to see other PG-M20X (serv.man28) service manuals if exist.