DOWNLOAD Sharp PG-M15 (serv.man3) Service Manual ↓ Size: 1.74 MB | Pages: 17 in PDF or view online for FREE

»

Adjustment needed
1. When the color wheel unit has been replaced.
2. When the color wheel sensor has been replaced.
3. When the optical drive unit has been replaced (If a deviation from normal setting is found).

»

Tools Required
1. Personal computer (run on Windows 95/98)
2. RGB cable

4. Use "+" and "-" keys on Keypad to adjust the value

to make the image have no abnormal color.

5. Press "Enter" key and "MENU" to go back to the

original image.

2.

Select “DMD” on the process mode screen.

2-1. Turn on the power. Press the ON/OFF button on the

projector or the POWER button on the remote controller.

2-2. Make sure the message “Turn Power OFF?” on the

screen. With this message still onscreen, press the
buttons in this order: “

'

”, “

'

”, “

"

” and “

"

” on the

remote controller, or “+”, “+”, “-” and “-” on the projector.

2-3. Be sure the process adjustment menu appears on

the screen, and select DMD.

1.

Choose R.G.B.W 4-color image.

1-1. Execute the “M15 Pattern dmw” command.
1-2. Click on “Color and Gray Scale”.
1-3. Left-click on the mouse to switch the pattern and to

provide the “R.G.B.W 4-color Image” (64 Intensities
for Primary Colors) output.

3. Choose "Color Wheel Index" to do adjustment.

2-1

2-1

2-2

2-2

1. Record type of DMD chip (An English letter in

capital) before assembly.

3. Choose "DMD Bin" to do setting.

4. Use "+" and "-" keys on Keypad to choose DMD

type same as the type of new one

5. Press "Enter" key and then Press "MENU" key to go

back to the original image.

Note: Be sure to make this DMD Type Setting to keep up the

DMD chip reliability.

2.

Select “DMD” on the process mode screen.

2-1. Turn on the power. Press the ON/OFF button on the

projector or the POWER button on the remote controller.

2-2. Make sure the message “Turn Power OFF?” on the

screen. With this message still onscreen, press the
buttons in this order: “

'

”, “

'

”, “

"

” and “

"

” on the

remote controller, or “+”, “+”, “-” and “-” on the projector.

2-3. Be sure the process adjustment menu appears on

the screen, and select DMD.

2-1

2-1

2-2

2-2

<Conceptual Drawing>

1. OSRAM Elliptical Reflector Kind of

HID Lamp 130W

2. UV-IR Filter

3. Color Wheel

4. Rod Lens

5. Condenser Lens 1

6. Condenser Lens 2

7. Reflection Mirror

8. Projection Zoom Lens

9. DMD Chip

Lamp

UV-IR Filter

Condenser 
Lens 1

Condenser 
Lens 2

Color Wheel

Reflection Mirror

Rod Lens

DMD Chip

Projection Zoom Lens

9

4

3

2

1

5

6

7

8

»

UV-IR Filter

: Filtering UV-IR out.

»

Color Wheel

: Separating the light beam into and produce R.G.B colors.

»

Rod Lens

: Making the light beam uniform.

»

Condenser Lens 1, 2

: Condenses the illumination of Rod Lens and projects it to the effective area of

the reflection mirror.

»

Reflection Mirror

: This mirror reflects the light rojected to the effection area of the DMD.

»

Projection Zoom Lens

: Image from the DMD Chip will be projected on the screen through projection lens.

»

DMD Chip

: This chip turns on and off in proportion to each color component per dot depending

on the in put source.

<Basic Functions>