PG-M15 (serv.man3). Service Manual Part 2 - Removing of major parts, Resetting the total lamp timer, Optical adjustment and measuring The optical unit outline (13-29) — Sharp Projector Service Manual (repair manual)

Model
PG-M15 (serv.man3)
Pages
17
Size
1.74 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Service Manual Part 2 - Removing of major parts, Resetting the total lamp timer, Optical adjustment and measuring The optical unit outline (13-29)
File
pg-m15-sm3.pdf
Date

View Sharp PG-M15 (serv.man3) Service Manual online

13
PG-M15X
PG-M15S
AN-M15T
REMOVING OF MAJOR PARTS
Tools required
1. Philips screw driver (Size : 1, 2)
2. Nut driver (2.5mm)
3. Ball end hexagonal driver (5.0mm)
1. Disassemble Top Cover Module, Main PWB Unit and DC to DC PWB Unit
1-1. Remove four screws on Bottom Cover. (Refer to Step 1, 2.)
Step 1
Step 2
1-1
14
PG-M15X
PG-M15S
AN-M15T
1-3
1-4
IR PWB Unit Cover
IR PWB Unit
1-2. Lift up Top Cover and unplug two wires connected to IR PWB Unit and Main Unit. (Refer to Step 3~5.)
1-3. Remove Top Cover.
1-4. Remove one screw to take off IR PWB Unit and IR PWB Unit Cover.
1-5. Remove four D-SUB shafts from the D-SUB Terminals to take off Terminal Sheet. (Refer to Step 6~7.)
Step 6
Step 7
Terminal sheet
1-5
Step 3
Step 4
Step 5
1-2
1-2
15
PG-M15X
PG-M15S
AN-M15T
2. Disassemble Optical Engine Module
2-1. Remove 4 screws from main PWB unit.
2-2. Using a ball end hexagonal driver, loosen 2 screws holding terminal sheet holder.
(approx. 4 rotation)(Step 8.)
2-3. Place a tool in between main PWB unit and formatter PWB unit and disconnect the connector. (Step 9.)
2-4. Pull the main unit outwards and remove main PWB unit. (Step 10,11.)
DC to DC PWB Unit
2-1
2-1
Step 8
Step 9
2-2
2-3
Step 10
Step 11
2-4
16
PG-M15X
PG-M15S
AN-M15T
Cut three cable tie
from Optical Engine 
Module.
Step 12
Step 13
Unplug three
Connecting Cords 
of DC to DC PWB Unit
2-5
2-5. Remove one screw of DC to DC PWB Unit Holder, unplug three Connecting Cords, and then detach DC to
DC PWB Unit.
(Step 12,13.)
2-6. Remove push bar, push bar spring, and rubber. (refer to step 14~16.)
Step 14
Step 15
Step 16
2-6
2-6
Page of 17
Display

Download Sharp PG-M15 (serv.man3) Service Manual (Repair Manual)

Here you can view online or download Sharp PG-M15 (serv.man3) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp PG-M15 (serv.man3) Projector. Information contained in Sharp PG-M15 (serv.man3) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).