Sharp PG-M15 (serv.man11) User Manual / Operation Manual ▷ View online
Operation
23
1
2
2
Setting up the Screen
Digital Keystone Correction
• When the image is distorted due to the projection
angle, the digital keystone correction function allows
you to correct it.
you to correct it.
• The digital keystone correction can be made by
pressing KEYSTONE (
/).
Projector
Using the KEYSTONE buttons
1
Press KEYSTONE
(
/)
to adjust the setting.
2
To reset the keystone setting, press BACK.
Remote control
(GUI) On-screen Display
Lamp Timer
Keystone
Picture
Options
Fine Sync
Language
PRJ Mode
END
SELECT
BACK
ENTER
AV Mute Disp.
OSD Display
Auto Power Off
Background
Blue
ON
ON
ON
Auto Source
ON
100
0
Using the GUI menu
1
Press MENU.
2
Press
∂
/ƒ
to select “Options”, and then press
ENTER.
3
Press
∂
/ƒ
to select “Keystone”, and then press
ENTER.
4
Press
∂
/ƒ
to move the mark to the desired
setting.
5
To exit from the GUI, press MENU.
• Straight lines and the edges of the displayed image may
appear jagged, when adjusting the keystone setting.
Projector
2,3,4
2,3
1,5
Remote control
• Whenever "Keystone" is displayed on the screen, you can
reset the setting by pressing BACK.
Operation
24
Operating the
Wireless Mouse
from the Remote Control
You can use the remote control to operate the mouse of the computer image projected to the screen.
Connecting the projector to a computer using a USB mouse control cable
1 Connect one end of the supplied USB mouse control cable to the RS-232C/MOUSE port on the projector.
2 Connect the other end to the corresponding terminal on the computer.
2 Connect the other end to the corresponding terminal on the computer.
Connecting to the USB port on a PC or Macintosh
USB mouse control
cable
cable
To USB port
Computer
• Windows 95 does not support USB mouse driver software.
• The minimum system requirements for the USB type mouse system are shown below.
• The minimum system requirements for the USB type mouse system are shown below.
Windows
Hardware: PC/AT compatible machine with USB port
OS: Windows 98/Windows 2000/Windows Me
Macintosh
Hardware: Macintosh series with USB port
OS: Mac OS 8.5 or higher
Hardware: PC/AT compatible machine with USB port
OS: Windows 98/Windows 2000/Windows Me
Macintosh
Hardware: Macintosh series with USB port
OS: Mac OS 8.5 or higher
• The wireless mouse functions can be used to operate computers compatible with USB type mouse system.
To RS-232C/MOUSE port
1
2
Operation
25
Remote Control/Wireless Mouse Positioning
• The remote control and the wireless mouse functions can be used to control the projector within the ranges
shown below.
• The remote control can be used with the wireless mouse functions to control the mouse operation on the computer
connected to the projector.
• The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the
signal may differ due to the screen material.
Operating the Wireless Mouse from the Remote Control
Controlling the Projector or Using the Wireless Mouse Functions
Remote control
Using as a Wireless Mouse
• When MOUSE is pressed, the buttons on the remote
control light up and the remote control enters MOUSE
mode.
mode.
• During MOUSE mode, the cursor can be used as the
pointer. MOUSE mode is for about ten seconds while
the buttons are lighting.
the buttons are lighting.
• When MENU or ENLARGE is pressed, MOUSE mode
is released to the normal mode.
• The wireless mouse may not operate correctly if your
computer is not correctly set up. Refer to the computer’s
operation manual for details of setting up/installing the
mouse driver.
operation manual for details of setting up/installing the
mouse driver.
• For one-button mouse systems, use either LEFT-CLICK or
RIGHT-CLICK.
• To conserve battery life, MOUSE stays active for
approximately 10 seconds. Reactivate by pressing MOUSE
again.
again.
Effective buttons in MOUSE mode
Remote control
(Front view)
Remote control
(Rear view)
Mouse
RIGHT-CLICK
LEFT-CLICK
23
(7 m)
23
(7 m)
30˚
30˚
30˚
45˚
45˚
Remote control
Remote control sensor
MOUSE CONTROL
OPERATION
OPERATION
26
Operation
Contrast
Picture
Options
Language
PRJ Mode
END
SELECT
BACK
ENTER
Bright
Color
Tint
Sharp
Red
Blue
CLR Temp
0
0
0
0
0
0
0
High
Reset
Using the
GUI
(Graphical User Interface) Menu Screens
This projector has four sets of menu screens (INPUT 1 (DVI), INPUT 1 (RGB), INPUT 1 (COMPONENT) and INPUT
2 (S-VIDEO) or 3 (VIDEO)) that allow you to adjust the image and various projector settings. These menu screens
can be operated from the projector or the remote control with the following buttons.
2 (S-VIDEO) or 3 (VIDEO)) that allow you to adjust the image and various projector settings. These menu screens
can be operated from the projector or the remote control with the following buttons.
(GUI) On-screen Display
3,5,6
2,4,7
8
8
1,9
Projector
Remote control
Contrast
Picture
Options
Fine Sync
Language
PRJ Mode
END
SELECT
BACK
ENTER
Bright
Red
Blue
CLR Temp
Reset
0
0
0
0
High
INPUT 1 (DVI) or (RGB) Mode
Menu Screen (Example)
INPUT 1 (COMPONENT), INPUT 2 (S-VIDEO) or
INPUT 3 (VIDEO) Mode Menu Screen (Example)
Basic Operation of the Menu Screen
Contrast
Picture
Options
Fine Sync
Language
PRJ Mode
END
SELECT
BACK
ENTER
Bright
Red
Blue
CLR Temp
Reset
0
0
0
0
High
1
Contrast
Picture
Options
Fine Sync
Language
PRJ Mode
END
SELECT
BACK
ENTER
Bright
Red
Blue
CLR Temp
Reset
0
0
0
0
High
2, 3
1 Press MENU to display the main menu.
2 Press ∂/ƒ to select an adjustment item in the
main menu.
3 Press ENTER to display the sub menu.
Click on the first or last page to see other PG-M15 (serv.man11) service manuals if exist.