Sharp PG-M15 (serv.man11) User Manual / Operation Manual ▷ View online
31
Operation
Contrast
Picture
Options
Fine Sync
Language
PRJ Mode
END
SELECT
BACK
ENTER
Bright
Red
Blue
CLR Temp
Reset
0
0
0
0
High
Contrast
Picture
Options
Language
PRJ Mode
END
SELECT
BACK
ENTER
Bright
Color
Tint
Sharp
Red
Blue
CLR Temp
0
0
0
0
0
0
0
High
Reset
Picture Adjustments
Projector
(GUI) On-screen Display
INPUT 1 (RGB) Mode
INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) Mode
2,3,4
2,3
1,5
Remote control
Contrast
Picture
Options
Language
PRJ Mode
END
SELECT
BACK
ENTER
Bright
Color
Tint
Sharp
Red
Blue
CLR Temp
0
0
0
0
0
0
0
High
Reset
INPUT 1 (COMPONENT) Mode
Adjusting the Picture
You can adjust the projector’s picture to your prefer-
ences with the following picture settings.
ences with the following picture settings.
All image adjustment items are returned to the factory preset
settings.
settings.
Description of Adjustment Items
For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue
Selected item
For more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
ƒ
button
∂
button
Contrast
Bright
Color
Tint
Sharp
Red
Blue
Reset
Bright
Color
Tint
Sharp
Red
Blue
Reset
• These adjustments do not work in INPUT 1 (DVI) mode.
• “Color”, “Tint” and “Sharp” do not appear in INPUT 1 (DVI)
• “Color”, “Tint” and “Sharp” do not appear in INPUT 1 (DVI)
or (RGB) mode.
1 Press MENU.
2 Press ∂/ƒ to select “Picture”, and then press
ENTER.
3 Press ∂/ƒ to select a specific adjustment item,
and then press ENTER.
The items except the selected one will be
displayed in gray.
The items except the selected one will be
displayed in gray.
4 Press ∂/ƒ to move the mark of the selected
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
• To reset all adjustment items, select “Reset”, and then press
ENTER.
32
Operation
Contrast
Picture
Options
Fine Sync
Language
PRJ Mode
END
SELECT
BACK
ENTER
Bright
Red
Blue
CLR Temp
Reset
0
0
0
0
High
Low
Picture Adjustments
Selecting the Color Temperature
(GUI) On-screen Display
Projector
2,3,4
2,3,4
1,5
This function can be used to adjust the color
temperature to suit the type of image input to the
projector (video, computer image, TV broadcast, etc.).
Decrease the color temperature to create warmer,
reddish images for natural flesh tones. Increase the color
temperature to create cooler, bluish images for a brighter
picture.
temperature to suit the type of image input to the
projector (video, computer image, TV broadcast, etc.).
Decrease the color temperature to create warmer,
reddish images for natural flesh tones. Increase the color
temperature to create cooler, bluish images for a brighter
picture.
Description of Color Temperature
Remote control
Increases color temperature for cooler, bluish,
florescent-like images. (High color temperature)
Decreases color temperature for warmer, reddish,
incandescent-like images. (Low color temperature)
florescent-like images. (High color temperature)
Decreases color temperature for warmer, reddish,
incandescent-like images. (Low color temperature)
Selected item Description
High
Low
1 Press MENU.
2 Press ∂/ƒ to select “Picture”, and then press
ENTER.
3 Press ∂/ƒ to select “CLR Temp”, and then press
ENTER.
4 Press ∂/ƒ to select “High” or “Low”, and then
press ENTER.
5 To exit from the GUI, press MENU.
33
Operation
Computer Image Adjustments (INPUT 1 (RGB) mode only)
Auto Sync
Adjustment
• Used to automatically adjust a computer image.
• Auto
• Auto
Sync
adjustment can be made manually by
pressing AUTO SYNC.
1 Press AUTO SYNC.
During Auto Sync adjustment, “Adjusting The Image”
is displayed as shown on the left.
is displayed as shown on the left.
• Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
projector.
• When the optimum image cannot be achieved with Auto
Sync adjustment, use manual adjustments. (See the steps
below.)
below.)
Projector
On-screen Display
1
Clock
Picture
Options
Fine Sync
Language
PRJ Mode
END
SELECT
BACK
ENTER
Phase
H-Pos
V-Pos
Signal Info
0
0
0
0
Adjusting the Computer Image
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur, causing flickering, vertical stripes, or contrast
irregularities in portions of the screen. Should this occur,
adjust “
detailed (tiling, vertical stripes, etc.), interference may
occur, causing flickering, vertical stripes, or contrast
irregularities in portions of the screen. Should this occur,
adjust “
Clock
”, “
Phase
”, “H-Pos” and “V-Pos” for the
optimum computer image.
• Computer image adjustments can be made easily by
pressing AUTO SYNC (
). See the step above for details.
(GUI) On-screen Display
Projector
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centers the on-screen image by moving it to the left or right.
Centers the on-screen image by moving it up or down.
Adjusts horizontal noise (similar to tracking on your VCR).
Centers the on-screen image by moving it to the left or right.
Centers the on-screen image by moving it up or down.
Clock
Phase
H-Pos
V-Pos
Phase
H-Pos
V-Pos
Description of Adjustment Items
(
Select the desired computer input mode with INPUT.)
1 Press MENU.
2 Press ∂/ƒ to select “Fine Sync”, and then press
ENTER.
3 Press ∂/ƒ to select a specific adjustment item,
and then press ENTER.
4 Press ∂/ƒ to move the mark of the selected
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
Description
Selected item
Remote control
2,3,4
2,3
1,5
Remote control
34
Useful Features
Useful Features
Freeze
Function
This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image from a computer or video, giving you more time
to explain the image to the audience.
You can also use this function to display a still image
from a computer while you make preparations for the
next computer images to be presented.
image. This is useful when you want to display a still
image from a computer or video, giving you more time
to explain the image to the audience.
You can also use this function to display a still image
from a computer while you make preparations for the
next computer images to be presented.
1 Press FREEZE on the remote control to freeze
the image.
2 Press FREEZE again to return to the moving
image.
Remote control
1, 2
• If the input signal is changed by pressing INPUT during
FREEZE, the function releases.
On-screen Display
Click on the first or last page to see other PG-M15 (serv.man11) service manuals if exist.