DOWNLOAD Sharp PG-F150X (serv.man5) Service Manual ↓ Size: 4.17 MB | Pages: 68 in PDF or view online for FREE

Auto Power Off

System Sound

System Lock

h

On

On

Auto Restart

On

STANDBY Mode

Standard

0

min

0

Lamp Timer(Life)

100%

Picture

SCR - ADJ

PRJ - ADJ

Help

SEL./ADJ.

ENTER

END

Speaker

On

Audio Input

Audio 1

RS-232C

9600 bps

Fan Mode

Normal

Disable

Menu operation n Page 37

• When the Auto Power Off function is set to

“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.

Selectable

items

On

Off

Description

When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.

The Auto Power Off function will be
disabled.

1

1

1

1

1 Auto Power Off Function

5

5

5

5

5 Speaker Setting

4

4

4

4

4 Setting the Confirmation

Selectable

items

On

Off

Description

A confirmation sound is made when
the projector turns on/off.

No confirmation sound is made.

When set to “Eco”, power consumption is
reduced in standby mode.

3 

3 

3 

3 

3 STANDBY Mode

Selectable

items

On

Off

Description

The audio signal is output from the
internal speaker.

The audio signal is not output from the
internal speaker.

6

6

6

6

6 Monitor Output

This function allows you to select an
appropriate combination of audio input
terminals for each input mode.

6 

6 

6 

6 

6 Audio Input

Selectable

items

Audio 1

Audio 2

Description

The AUDIO 1 input terminal is used as
an audio input terminal.

The AUDIO 2 input terminal is used as
an audio input terminal.

Selectable

items

Eco

Standard

Description

The monitor output and RS-232C functions
are switched off in standby mode.

The monitor output and RS-232C
functions are activated even if the
projector is in standby mode.

2

2

2

2

2 Auto Restart Function

Selectable

items

On

Off

Description

If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.

The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.

PGF150X_E_p39_43.p65

07.5.31, 6:29 PM

43

This function prevents unauthorized use of the
projector. Once this function is activated, users
must enter the correct keycode each time the
projector is turned on. We suggest you record
the keycode in a safe place where only au-
thorized users have access.

• If you lose or forget your keycode, contact

your nearest Sharp Authorized Projector
Dealer or Service Center. Even if the product
warranty is valid, the keycode reset will incur
a charge.

• When setting the keycode for the first

time, press R on the projector for four
times.

Setting the System Lock

PRJ - ADJ

Old Code

New Code

Reconfirm

– – – –

– – – –

– – – –

• If you input a wrong keycode, the cursor

returns to the first point of the “Old Code”.

• The preset keycode is 4 R  buttons on

the projector. When you press the R but-
ton four times, the keycord input screen
disappears.

9

9

9

9

9 System Lock Function

8

8

8

8

8 Fan Mode Setting

Menu operation n Page 37

This function changes the fan rotation speed.

Selectable

items

Normal

High

Description

Suitable for normal environments.

Select this when using the projector at
altitudes of approximately 1,500
meters (4,900 feet) or more.

7

7

7

7

7 Selecting the Transmission

Make sure that both the projector and computer
are set for the same baud rate.

Selectable

items

9600bps

115200bps

Description

Transmission speed is slow.

Transmission speed is rapid.

P
R

0

0

0

0

0 Checking the Lamp Life

You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).

• It is recommended that the lamp be changed

when the remaining lamp life becomes 5%.

• The lamp life may vary depending on the us-

age condition.

Lamp usage condition

Operated exclusively
with Lamp Setting set to
“Eco +Quiet”

Operated exclusively
with Lamp Setting set to
“Bright”

100%

Approx.
3,000
hours

Approx.
2,000
hours

5%

Approx.
150 hours

Approx.
100 hours

Remaining lamp life

“Life”

a Setting/Changing the keycode

When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.

 or Q.

• The screen for entering the keycode

PGF150X_E_P44_46.p65

07.5.31, 6:29 PM

44

Input screen for keycode

To cancel the keycode that you have already
set

• Press R on the projector for four times in steps

4 and 5 above.

When the System Lock is set

• When System Lock is set, the keycode input

screen appears after the power is turned on.
When it appears, enter the right keycode to
start projection.

• You cannot use the following buttons for

keycode:
• STANDBY/ON
• ON
• STANDBY
• ENTER
• L-CLICK
• R-CLICK/RETURN
• MENU/HELP

• System lock function recognizes each

Setting the System Lock

PRJ - ADJ

Old Code

New Code

Reconfirm

* * * *

–

– – –

– – – –

System Lock

– – – –

Use this function to lock the operation buttons
on the projector.

a Taking the Keylock off

Hold down ENTER on the projector for about 5
seconds.

On-screen display

a Locking the Operation Buttons

Hold down ENTER on the projector for about 5
seconds while the projector is being turned on.

On-screen display

• The keylock function does not affect the opera-

tion with the remote control buttons.

• You cannot use the keylock function while the

projector is warming up.

• When the projector is in standby mode, you can

release the keylock by holding down ENTER
and  STANDBY/ON  on the projector simulta-
neously for about 5 seconds.

• Keylock cannot be set while the projector is:

displaying the “Setup Guide” or “Menu”
screens, in standby mode, warming up,
changing input signals, operating “Auto Sync”
function, in “FREEZE” mode or on the “Sys-
tem Lock” screen during warming up.

PGF150X_E_P44_46.p65

07.5.31, 6:29 PM

45

This function advises you to solve the problems during usage.

• You can adjust the items with check marks (

✔).

• The items in the “Help” menu change, de-

pending on the input signal or setting that you
have selected.

• If the problem is not solved, refer to

• When selecting “sRGB” in "Picture Mode”, the

item “Color is faded or poor” is not displayed.
This means you cannot change input signal
types.

Press O or Q to adjust.

Press  P  or  R  to select “Vertical
stripes or flickering image ap-
pears” on Help menu, then press
ENTER

Example: When image flickering appears

Operation to solve image flickering when pro-
jecting the computer RGB signal.

Press O or Q to select “Help”, then
press ENTER.

Adjustment buttons
(P/R/O/Q)

ENTER button

MENU/HELP
button

0

Phase

SEL./ADJ.

Rtn. Menu

END

Help

There is no picture or audio

Vertical stripes or flickering image appear

Data image is not centered

Color is faded or poor

Picture is dark

The image is distorted

Reset all adjustments to default settings

If there is no change after performing "Auto Sync"
adjustments, adjust the following items.

Initiate “Auto Sync” Adjustments.

Vertical stripes or flickering image appear

Vertical stripes or flickering image appear

Adjust vertical noise

Adjust horizontal noise

Reset the 2 items above

Return

Signal Info

1024

768

H

48.3  kHz  /  V   59.9  Hz

Picture

SCR - ADJ

PRJ - ADJ

Help

Help

SEL.

ENTER

END

SEL.

ENTER

END

Press ENTER.

PGF150X_E_P44_46.p65

07.5.31, 6:29 PM

46