MX-PNX1C (serv.man8). Section -6 - Disassembly and Assembly . — Sharp Copying Equipment Service Manual (repair manual)

Model
MX-PNX1C (serv.man8)
Pages
13
Size
6.55 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Section -6 - Disassembly and Assembly .
File
mx-pnx1c-sm8.pdf
Date

View Sharp MX-PNX1C (serv.man8) Service Manual online

MX-FNX1/MX-PNX1  DISASSEMBLY AND ASSEMBLY  6 – 1
âºíuÇ´
Service Manual
 
[6] DISASSEMBLY AND 
ASSEMBLY
1. MX-FNX1
A. Exterior
(1) Inner finisher
1)
Loosen the screw, and disconnect the connector from the main
unit.
2)
Open the front cover, and remove the punch unit cover.
3)
Remove the stopper.
4)
Remove the screw, and remove the rail stay.
5)
Remove the inner finisher from the main unit.
(2) Inner cover
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover.
(3) Rear cover
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Slide the rail, and remove the rear cover.
(4) Left cover, bottom cover
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the left cover and the bottom cover.
1
2
1
2
1
2
MX-FNX1/MX-PNX1  DISASSEMBLY AND ASSEMBLY  6 – 2
(5) Reverse guide unit
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the reverse guide unit.
B. Transport section, paper exit section
(1) Paddle
1)
Open the front cover, and slide the inner finisher.
2)
Remove the paddle holders, and remove the paddles.
(2) Flapper solenoid
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Disconnect the connector, and remove the flapper solenoid.
* When installing, shift and fix the solenoid so that the reverse
flapper and the cushion material are in contact with each
other with the solenoid plunger pushed in.
(3) Inlet port sensor
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the sensor holder, and remove the inlet port sensor.
2
1
MX-FNX1/MX-PNX1  DISASSEMBLY AND ASSEMBLY  6 – 3
(4) Roller up/down sensor
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the bracket, and remove the roller up/down sensor.
(5) Take-up belt sensor
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Slide the harness guide, remove the bracket, and remove the
take-up belt sensor.
(6) Roller up/down motor
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the rear cover. Refer to A-(3).
4)
Remove the reverse guide unit.
5)
Slide the stapler drive unit. Disconnect the connector from the
PWB. Remove the roller up/down motor unit. Remove the
roller up/down motor.
(7) Belt separation solenoid
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the reverse guide unit. Refer to A-(5).
4)
Remove the parts, and remove the belt separation solenoid.
(8) Bundle exit paper transport roller
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the reverse guide unit. Refer to A-(5).
4)
Remove the parts, and remove the bundle exit paper transport
roller unit.
5)
Remove the parts, and remove the bundle exit paper transport
roller.
1
2
1
2
3
2
1
3
1
1
2
2
3
1
2
3
MX-FNX1/MX-PNX1  DISASSEMBLY AND ASSEMBLY  6 – 4
(9) Take-up belt, paper exit roller
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the reverse guide unit. Refer to A-(5).
4)
Remove the parts, and remove the bundle roller up/down lever
unit.
5)
Remove the parts, and remove the bundle roller unit.
6)
Remove the parts, and pull out the belt unit. Remove the parts,
and remove the belt unit.
7)
Remove the parts, and remove the take-up belt and the paper
exit roller.
(10) Inlet port gate
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the left cover and the bottom cover. Refer to A-(4).
4)
Remove the reverse guide unit. Refer to A-(5).
5)
Remove the PWB. Refer to F-(1).
6)
Remove the flapper solenoid. Refer to B-(2).
7)
Remove the slide rail. Remove the slider fixing bracket and
remove the earth terminal.
1
1
2
1
1
2
3
1
2
1
2
2
3
1
3
2
1
3
2
Page of 13
Display

Download Sharp MX-PNX1C (serv.man8) Service Manual (Repair Manual)

Here you can view online or download Sharp MX-PNX1C (serv.man8) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp MX-PNX1C (serv.man8) Copying Equipment. Information contained in Sharp MX-PNX1C (serv.man8) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).