Sharp MX-M950 / MX-MM1100 (serv.man38) Service Manual ▷ View online
MX-M1100 SIMULATION 7 – 21
8-18
Purpose
Operation test/check/adjustment
Function (Purpose) Used to check and adjust the operation of
the transfer belt cleaning brush output and
the control circuit.
the control circuit.
Section
Process (transfer)
Operation/Procedure
1)
1)
Select a target item of the adjustment with [
↑] [↓] keys.
2)
Enter the set value with 10-key.
3)
Press [EXECUTE] key.
The currently set voltage is outputted for 30 sec, and the set
value is saved.
When [EXECUTE] key is pressed, the operation is terminated.
The currently set voltage is outputted for 30 sec, and the set
value is saved.
When [EXECUTE] key is pressed, the operation is terminated.
4)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
8-20
Purpose
Operation test/check/adjustment
Function (Purpose) Control between transfer sheets (Print
paper transfer belt absorption margin up)
Section
Transfer
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
When the [OK] key is pressed, the input value is saved to
EEPROM and RAM.
EEPROM and RAM.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
10
10-1
Purpose
Operation test/check
Function (Purpose) Used to check the operation of the toner
motor and the control circuit.
Section
Process (Development)
Operation/Procedure
1)
1)
Select a target of the operation check with the touch panel key.
2)
Press [EXECUTE] key.
The selected load performs the operation during 10 sec.
When [EXECUTE] key is pressed, the operation is terminated.
The selected load performs the operation during 10 sec.
When [EXECUTE] key is pressed, the operation is terminated.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
10-2
Purpose
Operation test/check
Function (Purpose) Used to check the operation of the toner
hopper empty sensor.
Section
Process (Development)
Operation/Procedure
1)
1)
When [EXECUTE] key is pressed, the toner motor is driven for
10 sec.
* When the toner hopper empty sensor (TFSD) is turned ON,
10 sec.
* When the toner hopper empty sensor (TFSD) is turned ON,
the sensor name is highlighted.
2)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
10-3
Purpose
Operation test/check
Function (Purpose) Used to check the operation of the toner
cartridge motor rotation sensor.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key, and the following operations are exe-
cuted.
The toner cartridge motor is driven for 10 sec, and the toner
cartridge motor rotating sensor status is displayed.
* When the sensor is turned ON, the sensor name corre-
cuted.
The toner cartridge motor is driven for 10 sec, and the toner
cartridge motor rotating sensor status is displayed.
* When the sensor is turned ON, the sensor name corre-
sponding to the sensor is displayed.
2)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the sub code input menu.
returns to the sub code input menu.
Item/Display
Description of item
Setting
range
Default
Monitor connector
Adjustment
voltage
Actual output
voltage
Connector
Pin No.
(Monitor voltage)
A THVCL+
Output for the transfer belt cleaning
brush
brush
Print mode
10-150
23
CN2
1
0.36 – 0.49V
200
± 25V
B THVCL-
Cleaning mode
30-150
50
CN2
1
1.01 – 1.14V
-500
± 25V
Item
Display
Content
Setting
range
Default value
85-
sheet
model
95/110-
sheet
model
A
THV ON
TIMING ADJ
TIMING ADJ
Timing adjustment
value from transfer
margin value to
normal printing value.
value from transfer
margin value to
normal printing value.
1 - 99
40
25
Item
Display
Content
1
TM1
Toner motor 1
(TM1 operates only when the developing unit is
installed. )
(TM1 operates only when the developing unit is
installed. )
2
TM2
Toner motor 2
3
BOTM
Bottle drive motor
NO.
Display Item
Content
1
TFSD
Hopper remaining quantity sensor
NO.
Display Item
Content
1
BOTD
Toner cartridge motor rotation sensor
MX-M1100 SIMULATION 7 – 22
13
13--
Purpose
Cancel (trouble, etc.)
Function (Purpose) Used to cancel the self diag U1 trouble.
Section
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to cancel the trouble.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
14
14--
Purpose
Cancel (trouble, etc.)
Function (Purpose) Used to cancel the self diag H3/H4/H5 trou-
bles.
Section
Fusing
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to cancel the trouble.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
15
15--
Purpose
Cancel (trouble, etc.)
Function (Purpose) Used to cancel the self diag U6-09 (large
capacity paper feed tray) trouble.
Section
LCC
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to cancel the trouble.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
16
16--
Purpose
Cancel (trouble, etc.)
Function (Purpose) Used to cancel the self diag U2 trouble.
Section
Section
MFPcnt PWB/PCU PWB/SCU PWB
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to cancel the trouble.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
17
17--
Purpose
Cancel (trouble, etc.)
Function (Purpose) Used to cancel the self diag PF trouble.
Section
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to cancel the trouble.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
21
21-1
Purpose
Setting
Function (Purpose) Used to set the maintenance cycle.
Section
Section
Operation/Procedure
1)
1)
Select a target item of setting with [
↑] [↓] keys on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
NO.
Target
trouble code
Description
1
U1-01
FAX battery trouble
2
U1-02
RTC read trouble
NO.
Target trouble
code
Description
1
H3-00
Fusing high temperature trouble (HL1)
2
H3-01
Fusing high temperature trouble (HL2)
3
H3-02
Fusing high temperature trouble (HL3)
4
H4-00
Fusing low temperature trouble (HL1)
5
H4-01
Fusing low temperature trouble (HL2)
6
H4-02
Fusing low temperature trouble (HL3)
7
H5-01
Fusing paper exit not-reached JAM continuous
detection
detection
NO.
Target trouble
code
Description
1
U6-09
Lift motor trouble
NO.
Target trouble
code
Description
1
U2-00
EEPROM read/write error (ICU detection)
2
U2-05
HDD/Flash/EEPROM Content discrepancy
3
U2-10
SRAM user authentication index checksum error
4
U2-11
EEPROM checksum error (ICU detection)
5
U2-22
SRAM memory checksum error
6
U2-23
MFPS section SRAM memory individual data
checksum error
checksum error
7
U2-24
SRAM memory user authentication counter
checksum error
checksum error
8
U2-25
FLASH memory user authentication counter
checksum error
checksum error
9
U2-30
Manufacturing number data discrepancy
(ICU
(ICU
↔PCU)
NO.
Target trouble
code
Description
1
PF-00
RIC copy inhibit signal reception
Item
Display
Content
Setting range
Default
value
A
MAINTENANCE
COUNTER
(TOTAL)
COUNTER
(TOTAL)
Maintenance
counter (total)
counter (total)
0: DEFAULT
1 - 500:1K - 500K
999: FREE
1 - 500:1K - 500K
999: FREE
0 (500K)
B
MC CLEANING
COUNTER
COUNTER
MC cleaning
counter
counter
0: DEFAULT
1 - 200: 1K - 200K
999: FREE
1 - 200: 1K - 200K
999: FREE
0 (10K)
MX-M1100 SIMULATION 7 – 23
22
22-1
Purpose
Adjustment, setting, operation data output
and check
and check
Function (Purpose) Used to check the print count value of each
section and each operation mode. (Used to
check the maintenance timing.)
check the maintenance timing.)
Section
Operation/Procedure
1)
1)
Press [START] key to make printing.
2)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
22-2
Purpose
Adjustment/ Setting/ Operation data check
Function (Purpose) Used to check the total number of misfeed
and trouble. (If the total number of JAM is
considerably great, it is judged that repair is
required.)
considerably great, it is judged that repair is
required.)
Section
Operation/Procedure
1)
1)
The paper jam and the trouble counter values are displayed.
2)
Press [START] key to make printing.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
22-3
Purpose
Adjustment/ Setting/ Operation data check
Function (Purpose) Used to check the misfeed position and the
number of misfeed.
* This data can be used to estimate the
trouble position.
* This data can be used to estimate the
trouble position.
Section
Operation/Procedure
1)
1)
Paper JAM and misfeed data are displayed by max. 50 items
from the latest one. (The older one is sequentially deleted.)
from the latest one. (The older one is sequentially deleted.)
2)
Press [START] key to make printing.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
* For the JAM code list, refer to "2. Paper JAM code" in [12] OTH-
ERS.
22-4
Purpose
Adjustment/ Setting/ Operation data check
Function (Purpose) Used to check the trouble (self diag) his-
tory.
Section
Operation/Procedure
1)
1)
The trouble history is displayed by max. 30 items from the lat-
est one. (The older one is sequentially deleted.)
est one. (The older one is sequentially deleted.)
2)
Press [START] key to make printing.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
* For the trouble code list, refer to "2. Trouble code list" in [8]
returns to the SUB code entry menu.
* For the trouble code list, refer to "2. Trouble code list" in [8]
SELF DIAG AND TROUBLE CODE.
22-5
Purpose
Other
Function (Purpose) Used to check the ROM version of each
unit (section).
Section
Operation/Procedure
1)
1)
The ROM version of each section or of the installed unit is dis-
played.
played.
2)
If there is any problem in any software program, use this simu-
lation to check the ROM version and replace it with a new one.
lation to check the ROM version and replace it with a new one.
3)
Press [START] key to make printing.
4)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
NO.
Target counter
Display
Description
De-
fault
value
1
Total output
quantity
quantity
TOTAL OUT
(BW)
(BW)
B/W total output
quantity
quantity
0
2
Total use
quantity
quantity
TOTAL (BW)
B/W total use
quantity
quantity
0
TOTAL (COL)
Total use quantity of
color
color
0
3
Copy
COPY (BW)
B/W copy counter
0
4
Print
PRINT (BW)
B/W print counter
0
5
Document filing
DOC FIL (BW)
B/W document filing
print counter
print counter
0
6
Other
OTHER (BW)
Counter of other than
B/W
B/W
0
7
Maintenance
counter
counter
MAINTENANCE Maintenance
counter
0
8
Drum
DRUM LIFE
Drum life counter
0
9
Developer
DEVE LIFE
Developer life
counter
counter
0
10
Toner cartridge
TONER
Toner cartridge print
counter
counter
0
11
Fusing unit
FUSER WEB
SEND
SEND
Fusing web cleaning
send counter
send counter
0
12
MC cleaner
MC COUNT
MC cleaning counter
0
NO.
Display
Content
Default
value
1
MACHINE JAM
Machine JAM counter
0
2
DSPF JAM
SPF JAM counter
0
3
TROUBLE
Trouble counter
0
NO.
Display Item
Description of item content
1
S/N
Serial No.
2
ICU (MAIN)
ICU (Main section)
3
ICU (BOOT)
ICU (Boot section)
4
LANGUAGE
Language support data version
5
GRAPHIC
LCD graphic data
6
IMG DATA ROM
ImageASIC FlashROM data
7
COLOR PROFILE
Color profile
8
OPU
OPU
9
PCU
PCU
10
SCU
SCU
11
SPF
SPF
12
FAX (MAIN)
FAX (Main section)
13
LCC Side
LCC
14
FINISHER
Finisher
15
SADDLE
Saddle unit
16
INSERTER
Inserter
17
FOLDING UNIT
Paper folding unit
18
NIC
NIC
19
FIERY
FIERY option
20
POWER-CON Power
controller
MX-M1100 SIMULATION 7 – 24
22-6
Purpose
Adjustment/ Setting/ Operation data check
Function (Purpose) Used to output the list of various setting
and adjustment data (simulation, FAX soft
switch, counter).
switch, counter).
Section
Operation/Procedure
* When installing or servicing, this simulation is executed to print
* When installing or servicing, this simulation is executed to print
the list of various adjustment and setting data for use in the next
servicing. (Memory trouble, PWB replacement, etc.)
servicing. (Memory trouble, PWB replacement, etc.)
1)
Select a print mode with 10-key. 1. List print
2)
When [EXECUTE] key is pressed, the list selected in step 1 is
printed.
printed.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
22-8
Purpose
Adjustment/ Setting/ Operation data check
Function (Purpose) Used to check the counter value of the fin-
isher, DSPF, and the scan (reading).
Section
Operation/Procedure
1)
1)
The counter values of the finisher, DSPF, and the scanner are
displayed.
displayed.
2)
Press [START] key to make printing.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
22-9
Purpose
Adjustment/ Setting/ Operation data check
Function (Purpose) Used to check the use quantity (print quan-
tity) of each paper feed section.
Section
Paper feed, ADU, LCC
Operation/Procedure
1)
1)
The counter values related to paper feed are displayed.
2)
Press [START] key to make printing.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
(*1) Displayed only when the option is installed.
(*2) LCC and 3SLCC are not displayed at a same time.
(*2) LCC and 3SLCC are not displayed at a same time.
22-10
Purpose
Adjustment/ Setting/ Operation data check
Function (Purpose) Used to check the system configuration
(option, internal hardware).
Section
Operation/Procedure
1)
1)
The system configuration is displayed.
(The installed devices and options are displayed in their model
names.)
(The installed devices and options are displayed in their model
names.)
2)
Press [START] key to make printing.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
21
E-MANUAL
Instruction manual (stored in HDD)
22
WEB HELP
WEB HELP
NO.
Display
Content
Display digit
number or
type
1
DSPF
Document feed quantity
8 digits
2
SCAN
Scan number
8 digits
3
STAMP
Stamp counter
8 digits
4
COVER
Cover open/close
counter
counter
8 digits
5
HP_ON
Home position detection
counter
counter
8 digits
6
OC LAMP TIME
The total lighting time of
the lamp in the OC
section is displayed.
the lamp in the OC
section is displayed.
-- hour --
minute
7
DSPF LAMP TIME
The total lighting time of
the lamp in the DSPF
section is displayed.
the lamp in the DSPF
section is displayed.
-- hour --
minute
8
STAPLE
Staple counter
8 digits
9
SADDLE STAPLE
Saddle staple counter
8 digits
10
PUNCH
Punch counter
8 digits
11
GBC PUNCH
GBC punch counter
8 digits
12
FOLDING
Paper folding counter
8 digits
13
INSERTER
Inserter tray 1 counter
8 digits
14
INSERTER2
Inserter tray 2 counter
8 digits
15
INSERTER OFFLINE
Inserter offline counter
8 digits
NO.
Display Item
Description of item content
NO.
Display
Content
Display
digit
number
De-
fault
value
1
TRAY1
Tray 1 paper feed counter
8 digits
0
2
TRAY2
Tray 2 paper feed counter
8 digits
0
3
TRAY3
Tray 3 paper feed counter
8 digits
0
4
TRAY4
Tray 4 paper feed counter
8 digits
0
5
ADU
ADU paper feed counter
8 digits
0
6
MFT
Manual paper feed counter
(*1)
(*1)
8 digits
0
7
LCC
Side LCC paper feed
counter (A4 or A3 LCC)
(*1) (*2)
counter (A4 or A3 LCC)
(*1) (*2)
8 digits
0
8
3SLCC1
LCC1 paper feed counter
(*1) (*2)
(*1) (*2)
8 digits
0
9
3SLCC2
LCC2 paper feed counter
(*1) (*2)
(*1) (*2)
8 digits
0
10
3SLCC3
LCC3 paper feed counter
(*1) (*2)
(*1) (*2)
8 digits
0
11
TRAY1_TTL
Accumulation tray 1 paper
feed counter
feed counter
8 digits
0
12
TRAY2_TTL
Accumulation tray 2 paper
feed counter
feed counter
8 digits
0
13
TRAY3_TTL
Accumulation tray 3 paper
feed counter
feed counter
8 digits
0
14
TRAY4_TTL
Accumulation tray 4 paper
feed counter
feed counter
8 digits
0
15
ADU_TTL
Accumulation ADU paper
feed counter
feed counter
8 digits
0
16
MFT_TTL
Accumulation manual
paper feed counter (*1)
paper feed counter (*1)
8 digits
0
17
LCC_TTL
Accumulation side LCC
paper feed counter
(A4 or A3 LCC) (*1) (*2)
paper feed counter
(A4 or A3 LCC) (*1) (*2)
8 digits
0
18
3SLCC1_TTL
Accumulation LCC1
counter (*1) (*2)
counter (*1) (*2)
8 digits
0
19
3SLCC2_TTL
Accumulation LCC2
counter (*1) (*2)
counter (*1) (*2)
8 digits
0
20
3SLCC3_TTL
Accumulation LCC3
counter (*1) (*2)
counter (*1) (*2)
8 digits
0
NO.
Item display
Display
Content
Content
1
MACHINE
MX-M850
Main unit (85-sheet machine)
MX-M950
Main unit (95-sheet machine)
MX-M1100
Main unit (110-sheet machine)
2
DSPF
STANDARD
Document feed unit
3
STAMP
AR-SU1
Finish stamp
4
LCC
MX-LCX3N
Large capacity tray (A3)
MX-LCX4
Large capacity 3-stage paper
feed tray (A4)
feed tray (A4)
MX-LCX5
Large capacity 3-stage paper
feed tray (A3)
feed tray (A3)
MX-LCX6
Large capacity paper feed tray
(A4)
(A4)
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man38) service manuals if exist.