Sharp MX-M850 (serv.man37) Service Manual ▷ View online
MX-M1100 SIMULATION 7 – 45
44-46
Purpose
Function (Purpose) Used to display the development dot diam-
Function (Purpose) Used to display the development dot diam-
eter adjustment result.
Section
Operation/Procedure
Press [EXECUTE] key.
When the operation is completed normally, the execution result is
displayed.
When the operation is terminated abnormally, "ERROR" is dis-
played.
Select a page with [
Press [EXECUTE] key.
When the operation is completed normally, the execution result is
displayed.
When the operation is terminated abnormally, "ERROR" is dis-
played.
Select a page with [
↑] [↓] keys.
46
46-2
Purpose
Adjustment (B/W copy mode)
Function (Purpose) Used to adjust the copy density adjustment
in the copy mode.
Section
Operation/Procedure
1)
1)
Select a target item of the check with [
↑] [↓] keys on the touch
panel.
2)
Enter the set value with 10-key.
* When U or V key is pressed, the set value of each item is
* When U or V key is pressed, the set value of each item is
increased or decreased by 1.
Collective change can be made.
Collective change can be made.
3)
Press [OK] key. (The set value is saved.)
When [START] key is pressed, copying is performed.
When [START] key is pressed, copying is performed.
46-4
Purpose
Adjustment (Color scanner mode)
Function (Purpose) Used to adjust the density in the scanner
mode.
Section
Operation/Procedure
1)
1)
Select a target item of the check with [
↑] [↓] keys on the touch
panel.
2)
Enter the set value with 10-key.
* When U or V key is pressed, the set value of each item is
* When U or V key is pressed, the set value of each item is
increased or decreased by 1.
Collective change can be made.
Collective change can be made.
3)
Press [OK] key. (The set value is saved.)
When [START] key is pressed, copying is performed.
When [START] key is pressed, copying is performed.
46-5
Purpose
Adjustment (Monochrome scanner mode)
Function (Purpose) Used to adjust the density in the scanner
mode.
Section
Operation/Procedure
1)
1)
Select a target item of the check with [
↑] [↓] keys on the touch
panel.
2)
Enter the set value with 10-key.
* When U or V key is pressed, the set value of each item is
* When U or V key is pressed, the set value of each item is
increased or decreased by 1.
Collective change can be made.
Collective change can be made.
3)
Press [OK] key. (The set value is saved.)
When [START] key is pressed, copying is performed.
When [START] key is pressed, copying is performed.
Detailed error
display
Error display
Details of error
DENSITY ERROR
Density correction
abnormality
abnormality
The patch density is not in
the range of the target
the range of the target
± 30%.
PATCH ERROR
Patch non-
detection judgment
detection judgment
The patch output ratio is 200
or more.
or more.
TARGET
Adjustment value
PATCH
Patch data
Button
Dis
play
Item Content
Setting
range
De-
fault
value
Write
Remark
TARGET
LDD
UTY
UTY
Obtained laser
DUTY
DUTY
0 - 31
0
YES
LDP
Laser power
after
correction
after
correction
1 - 255
100
NO
DOT
LDP
LDP
LPD correction
value changed
by the dot
diameter
adjustment
value changed
by the dot
diameter
adjustment
-127 -
127
0
YES
AD
SL
SL
Dot diameter
characteristics
gradient
coefficient
characteristics
gradient
coefficient
-999.9
- 999.9
0
YES
Decimal
point
displayed
point
displayed
AD
INT
INT
Dot diameter
characteristics
intersect
coefficient
characteristics
intersect
coefficient
-999.9
- 999.9
0
YES
Decimal
point
displayed
point
displayed
PATCH
PT
Patch output
value
value
1 - 255
0
NO
BS
Base output
value
value
1 - 255
0
NO
Item
Display
Item Content
Setting
range
Default
value
A
AUTO1
Auto 1
1 - 99
50
B
AUTO2
Auto 2
1 - 99
50
C
TEXT
Text
1 - 99
50
D
TEXT/PRINTED
PHOTO
PHOTO
Text/ Printed Photo
1 - 99
50
E
TEXT/PHOTO
Text/ Photo
1 - 99
50
F
PRINTED PHOTO
Printed Photo
1 - 99
50
G
PHOTOGRAPH
Photograph
1 - 99
50
H
MAP
Map
1 - 99
50
I
LIGHT
Light document
1 - 99
50
Item
Display
Item Content
Setting
range
Default
value
A
TEXT
Text
1 - 99
50
B
TEXT/PRINTED
PHOTO
PHOTO
Text/ Printed Photo
1 - 99
50
C
TEXT/PHOTO
Text/ Photo
1 - 99
50
D
PRINTED PHOTO
Printed Photo
1 - 99
50
E
PHOTOGRAPH
Photograph
1 - 99
50
F
MAP
Map
1 - 99
50
Item
Display
Item Content
Setting
range
Default
value
A
AUTO TEXT
Auto / Text
1 - 99
50
B
AUTO TEXT/
PRINT PHOTO
PRINT PHOTO
Auto / Text /
Printed Photo
Printed Photo
1 - 99
50
C
AUTO TEXT/
PHOTO
PHOTO
Auto / text / Photo
1 - 99
50
D
TEXT
Text
1 - 99
50
E
TEXT/
PRINTEDPHOTO
PRINTEDPHOTO
Text / Printed Photo
1 - 99
50
F
TEXT/PHOTO
Text/ Photo
1 - 99
50
G
PRINTED PHOTO
Printed Photo
1 - 99
50
H
PHOTOGRAPH
Photograph
1 - 99
50
I
MAP
Map
1 - 99
50
MX-M1100 SIMULATION 7 – 46
46-8
Purpose
Adjustment (Color scanner mode)
Function (Purpose) Used to adjust the scanner color balance
RGB.
Section
Operation/Procedure
1)
1)
Select a target color of the adjustment with [R], [G], and [B]
keys on the touch panel.
keys on the touch panel.
2)
Select a target item of the check with [
↑] [↓] keys on the touch
panel.
3)
Enter the set value with 10-key.
4)
Press [OK] key. (The set value is saved.)
When [START] key is pressed, copying is performed.
When [START] key is pressed, copying is performed.
46-9
Purpose
Adjust (DSPF mode)
Function (Purpose) Used to adjust the copy density adjustment
in the copy mode.
Section
Operation/Procedure
1)
1)
Select a target item of the adjustment with [OC] [DSPF] keys
on the touch panel.
on the touch panel.
2)
Select a target item of the check with [
↑] [↓] keys on the touch
panel.
3)
Enter the set value with 10-key.
* When U or V key is pressed, the set value of each item is
* When U or V key is pressed, the set value of each item is
increased or decreased by 1.
Collective change can be made.
Collective change can be made.
4)
Press [OK] key. (The set value is saved.)
When [START] key is pressed, copying is performed.
When [START] key is pressed, copying is performed.
46-10
Purpose
Adjustment
Function (Purpose) Used to perform the engine gray balance
manual adjustment.
Section
Operation/Procedure
1)
1)
Select a target mode of the adjustment with the touch panel
key.
key.
2)
Select a target item of the check with [
↑] [↓] keys on the touch
panel.
3)
Enter the set value with 10-key.
* When U or V key is pressed, the set value of each item is
* When U or V key is pressed, the set value of each item is
increased or decreased by 1.
Collective change can be made.
Collective change can be made.
4)
Press [OK] key. (The set value is saved.)
<<Setting range of each set value and default>>
Item
Display
Item Content
Setting
range
Default
value
A
LOW DENSITY
POINT
POINT
Set value of the low
density correction
amount
density correction
amount
1 - 99
50
B
HIGH DENSITY
POINT
POINT
Set value of the high
density correction
amount
density correction
amount
1 - 99
50
Item
Button
Display
Content
Set-
ting
ting
range
De-
fault
value
A
OC
COPY
SIDEA: LOW
SIDEA: LOW
DSPF coy mode
exposure adjustment
(low density side)
exposure adjustment
(low density side)
1 - 99
42
B
SCAN
SIDEA: LOW
SIDEA: LOW
DSPF scanner mode
exposure adjustment
(low density side)
exposure adjustment
(low density side)
1 - 99
42
C
FAX SIDEA:
LOW
LOW
DSPF FAX mode
exposure adjustment
(low density side)
exposure adjustment
(low density side)
1 - 99
42
D
COPY
SIDEA:
HIGH
SIDEA:
HIGH
DSPF copy mode
exposure adjustment
(high density side)
exposure adjustment
(high density side)
1 - 99
53
E
SCAN
SIDEA:
HIGH
SIDEA:
HIGH
DSPF scanner mode
exposure adjustment
(high density side)
exposure adjustment
(high density side)
1 - 99
53
F
FAX SIDEA:
HIGH
HIGH
DSPF FAX mode
exposure adjustment
(high density side)
exposure adjustment
(high density side)
1 - 99
53
A
DSPF
COPY
SIDEB: LOW
SIDEB: LOW
DSPF coy mode
exposure adjustment
(low density side)
exposure adjustment
(low density side)
1 - 99
45
B
SCAN
SIDEB: LOW
SIDEB: LOW
DSPF scanner mode
exposure adjustment
(low density side)
exposure adjustment
(low density side)
1 - 99
45
C
FAX SIDEB:
LOW
LOW
DSPF FAX mode
exposure adjustment
(low density side)
exposure adjustment
(low density side)
1 - 99
45
D
COPY
SIDEB:
HIGH
SIDEB:
HIGH
DSPF copy mode
exposure adjustment
(high density side)
exposure adjustment
(high density side)
1 - 99
50
E
SCAN
SIDEB:
HIGH
SIDEB:
HIGH
DSPF scanner mode
exposure adjustment
(high density side)
exposure adjustment
(high density side)
1 - 99
50
F
FAX SIDEB:
HIGH
HIGH
DSPF FAX mode
exposure adjustment
(high density side)
exposure adjustment
(high density side)
1 - 99
50
G
BALANCE
SIDEB: R
SIDEB: R
DSPF color balance R
1 - 99
50
H
BALANCE
SIDEB: G
SIDEB: G
DSPF color balance G
1 - 99
50
I
BALANCE
SIDEB: B
SIDEB: B
DSPF color balance B
1 - 99
50
Item
Item Content
TEXT
Text
TEXT/PRT PHOTO
Text/ Printed Photo
PRINTED PHOTO
Printed Photo
PHOTO+TEXT/PHOTO
Photograph + Text / Photograph
MAP
Map
LIGHT
Light document
Item
Display
Item Content
Setting range
Default value
A
POINT1
Point 1
373 - 627
500
B
POINT2
Point 2
373 - 627
500
C
POINT3
Point 3
373 - 627
500
D
POINT4
Point 4
373 - 627
500
E
POINT5
Point 5
373 - 627
500
F
POINT6
Point 6
373 - 627
500
G
POINT7
Point 7
373 - 627
500
H
POINT8
Point 8
373 - 627
500
I
POINT9
Point 9
373 - 627
500
J
POINT10
Point 10
373 - 627
500
K
POINT11
Point 11
373 - 627
500
L
POINT12
Point 12
373 - 627
500
M
POINT13
Point 13
373 - 627
500
N
POINT14
Point 14
373 - 627
500
O
POINT15
Point 15
373 - 627
500
P
POINT16
Point 16
373 - 627
500
Item
Button
Display
Content
Set-
ting
ting
range
De-
fault
value
MX-M1100 SIMULATION 7 – 47
46-16
Purpose
Adjustment
Function (Purpose) Used to perform the engine color balance
manual adjustment.
(Monochrome, all modes)
(Monochrome, all modes)
Section
Operation/Procedure
1)
1)
Select a target item of setting with [
↑] [↓] keys on the touch
panel.
2)
Enter the set value with 10-key.
* When U or V key is pressed, the set value of each item is
* When U or V key is pressed, the set value of each item is
increased or decreased by 1.
Collective change can be made.
Collective change can be made.
3)
Press [OK] key. (The set value is saved.)
46-19
Purpose
Setting
Function (Purpose) Used to set the monochrome auto expo-
sure mode.
Section
Operation/Procedure
Select a target item of setting with the touch panel.
The selected item is highlighted, and the setting is saved.
Select a target item of setting with the touch panel.
The selected item is highlighted, and the setting is saved.
Descriptions of each item
46-23
Purpose
Adjustment/ Setting
Function (Purpose) Used to set the half-tone max. density cor-
rection.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key. (The set value is saved.)
Item
Display
Item Content
Setting
range
Default
value
A
POINT1
Point 1
373 - 627
500
B
POINT2
Point 2
373 - 627
500
C
POINT3
Point 3
373 - 627
500
D
POINT4
Point 4
373 - 627
500
E
POINT5
Point 5
373 - 627
500
F
POINT6
Point 6
373 - 627
500
G
POINT7
Point 7
373 - 627
500
H
POINT8
Point 8
373 - 627
500
I
POINT9
Point 9
373 - 627
500
J
POINT10
Point 10
373 - 627
500
K
POINT11
Point 11
373 - 627
500
L
POINT12
Point 12
373 - 627
500
M
POINT13
Point 13
373 - 627
500
N
POINT14
Point 14
373 - 627
500
O
POINT15
Point 15
373 - 627
500
P
POINT16
Point 16
373 - 627
500
Item
Content
Set
value
Default value
AE_
MODE
MODE
Auto exposure
mode
mode
MODE1
MODE2
MODE2
For other than Japan: MODE1
For Japan: MODE2
For Japan: MODE2
AE_
STOP_
COPY
STOP_
COPY
Auto B/W
exposure STOP
(for copying)
exposure STOP
(for copying)
ON/OFF
ON
(Background judgment at the
document lead edge)
(Background judgment at the
document lead edge)
AE_
STOP_
FAX
STOP_
FAX
Auto B/W
exposure STOP
(for FAX)
exposure STOP
(for FAX)
ON/OFF
ON
(Background judgment at the
document lead edge)
(Background judgment at the
document lead edge)
AE_
STOP_
SCAN
STOP_
SCAN
Auto B/W
exposure STOP
(for scanner)
exposure STOP
(for scanner)
ON/OFF
ON
(Background judgment at the
document lead edge)
(Background judgment at the
document lead edge)
AE_
FILTER
FILTER
Auto exposure
filter setting
filter setting
SOFT
NORMAL
SHARP
NORMAL
AE_
WIDTH
WIDTH
AE exposure
width
width
FULL
PART
FULL
(Background judgment with the
document detection width)
(Background judgment with the
document detection width)
AE_MODE
Copy auto mode setting can be selected from MODE1
and MODE2.
MODE1 :
and MODE2.
MODE1 :
Provides good reproduction in the lower
density, and suitable for copy of printed
photos. For duplex copy on thin paper,
images on the back surface may appear on
the front surface.
density, and suitable for copy of printed
photos. For duplex copy on thin paper,
images on the back surface may appear on
the front surface.
MODE2 :
Images on the back surface of thin paper in
duplex copy hardly appear on the front
surface. However, the density in the lower
density section is lower than that in
MODE1.
duplex copy hardly appear on the front
surface. However, the density in the lower
density section is lower than that in
MODE1.
AE_STOP_
COPY
COPY
The auto exposure system of the copy auto mode can be
selected from Lead edge stop ON and Lead edge stop
OFF (Real time system).
AE_STOP_COPY ON
selected from Lead edge stop ON and Lead edge stop
OFF (Real time system).
AE_STOP_COPY ON
The correction table of the
whole images is automatically
set according to the scan data
of several mm at the document
lead edge.
whole images is automatically
set according to the scan data
of several mm at the document
lead edge.
AE_STOP_COPY OFF
The correction table is
automatically set for every one
line of the document. When
changes in the document, and
the half-tone density changes
accordingly. However, it is
effective for prevention of
appearing back images on the
front.
automatically set for every one
line of the document. When
changes in the document, and
the half-tone density changes
accordingly. However, it is
effective for prevention of
appearing back images on the
front.
AE_STOP_
FAX
FAX
FAX auto mode auto exposure mode select (The system is
similar with the item of AE_STOP_COPY.)
similar with the item of AE_STOP_COPY.)
AE_STOP_
SCAN
SCAN
Scan to xx auto mode auto exposure system select
(The system is similar with the item of AE_STOP_COPY.)
(The system is similar with the item of AE_STOP_COPY.)
AE_FILTER
The copy auto mode filter setting can be selected from
SOFT, NORMAL, and SHARP.
SOFT :
SOFT, NORMAL, and SHARP.
SOFT :
Used to delete moire in copy. However,
images are softly focused.
images are softly focused.
NORMAL :
Default
SHARP :
Used to make clear and sharp photos and
thin lines in the copy. However, moire may
be easily produced.
thin lines in the copy. However, moire may
be easily produced.
AE_WIDTH
The main scanning direction width of the background
judgment scan data used in the auto exposure in the copy,
FAX, Scan auto mode can be selected from FULL and
PART.
FULL :
judgment scan data used in the auto exposure in the copy,
FAX, Scan auto mode can be selected from FULL and
PART.
FULL :
Full scan data of the main scanning
direction width of the detected document
size are used.
direction width of the detected document
size are used.
PART :
Scan data of about 100mm width in the
main scanning direction from the document
reference position are used. When an
uncertain size document such as a
newspaper clipping is copied, images on
the back may not easily appear on the front.
main scanning direction from the document
reference position are used. When an
uncertain size document such as a
newspaper clipping is copied, images on
the back may not easily appear on the front.
Item
Display
Item Content
Setting
range
Default
value
A
(0: ENABLE
1: DISABLE)
1: DISABLE)
0
Engine max. density
correction mode Enable
correction mode Enable
0 - 1
1
1
Engine max. density
correction mode Disable
correction mode Disable
MX-M1100 SIMULATION 7 – 48
46-24
Purpose
Adjustment
Function (Purpose) Used to adjust the engine half-tone auto
density adjustment.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
The half-tone auto density adjustment is performed and the
self print is made.
The half-tone auto density adjustment is performed and the
self print is made.
2)
Place the printed self print patch on the glass table, and select
the process mode with [FACTORY] and [SERVICE] keys on
the touch panel.
the process mode with [FACTORY] and [SERVICE] keys on
the touch panel.
3)
Press [EXECUTE] key.
The patches are read, and the self print of 16 patches is made.
The correction value is saved, and the reference value regis-
tration is performed.
The patches are read, and the self print of 16 patches is made.
The correction value is saved, and the reference value regis-
tration is performed.
46-31
Purpose
Adjustment/ Setting
Function (Purpose) Used to adjust image sharpness.
Section
Section
Operation/Procedure
1)
1)
Select a target item of setting with [
↑] [↓] keys on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
46-32
Purpose
Adjustment/ Setting
Function (Purpose) Adjustment of basic color density for AE
mode.
Section
Operation/Procedure
1)
1)
Select a target item of setting with [
↑] [↓] keys on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press the [OK] key. (The set value is saved.)
46-37
Purpose
Adjustment/ Setting
Function (Purpose) Used to adjust B/W image forming.
Section
Section
Operation/Procedure
1)
1)
Select a target item of setting with [
↑] [↓] keys on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [YES] key. (The set value is saved.)
46-39
Purpose
Adjustment/ Setting
Function (Purpose) Used to adjust the image send sharpness.
Section
Section
Operation/Procedure
1)
1)
Select a target item of setting with [
↑] [↓] keys on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
46-40
Purpose
Adjustment/ Setting
Function (Purpose) Used to collectively adjust all the FAX expo-
sure modes.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [EXECUTE] key.
The set value is saved and the adjustment print is made.
The set value is saved and the adjustment print is made.
Item
Display
Item Content
Setting
range
Default
value
A
TEXT
Text
0 - 2
0
B
TEXT/
PRT PHOTO
PRT PHOTO
Text / Printed photo
0 - 2
0
C
TEXT/PHOTO
Text / Photograph
0 - 2
0
D
PRINTED
PHOTO
PHOTO
Printed photo
0 - 2
0
E
PHOTO
Photograph
0 - 2
0
F
MAP
Map
0 - 2
0
G
LIGHT
Light document
0 - 2
0
Item
Display
Item Content
Setting
range
Default
value
A
COPY: OC
Copy mode (OC)
1 - 250
196
B
COPY: DSPF
(SIDE1)
(SIDE1)
Copy mode
(DSPF front surface)
(DSPF front surface)
1 - 250
196
C
COPY: DSPF
(SIDE2)
(SIDE2)
Copy mode
(DSPF back surface)
(DSPF back surface)
1 - 250
196
D
SCAN: OC
Scan mode (OC)
1 - 250
196
E
SCAN: DSPF
(SIDE1)
(SIDE1)
Scan mode
(DSPF front surface)
(DSPF front surface)
1 - 250
196
F
SCAN: DSPF
(SIDE2)
(SIDE2)
Scan mode
(DSPF back surface)
(DSPF back surface)
1 - 250
196
G
FAX: OC
FAX mode (OC)
1 - 250
196
H
FAX: DSPF
(SIDE1)
(SIDE1)
FAX mode
(DSPF front surface)
(DSPF front surface)
1 - 250
196
I
FAX: DSPF
(SIDE2)
(SIDE2)
FAX mode
(DSPF back surface)
(DSPF back surface)
1 - 250
196
Item
Display
Item Content
Setting
range
Default
value
A
R/G
Gray forming setting (R/G)
0 - 99
35
B
B/G
Gray forming setting (B/G)
0 - 99
0
Item
Display
Item Content
Setting
range
Default
value
A
200 x 100 [DPI] OFF
200
✕ 100 [DPI]
half-tone OFF
0 - 2
1
B
200 x 200 [DPI] OFF
200
✕ 200 [DPI]
half-tone OFF
0 - 2
1
C
200 x 200 [DPI] ON
200
✕ 200 [DPI]
half-tone ON
0 - 2
1
D
200 x 400 [DPI] OFF
200
✕ 400 [DPI]
half-tone OFF
0 - 2
1
E
200 x 400 [DPI] ON
200
✕ 400 [DPI]
half-tone ON
0 - 2
1
F
400 x 400 [DPI] OFF
400
✕ 400 [DPI]
half-tone OFF
0 - 2
1
G
400 x 400 [DPI] ON
400
✕ 400 [DPI]
half-tone ON
0 - 2
1
H
600 x 600 [DPI] OFF
600
✕ 600 [DPI]
half-tone OFF
0 - 2
1
I
600 x 600 [DPI] ON
600
✕ 600 [DPI]
half-tone ON
0 - 2
1
Item
Display item &
detail display
Content
Setting
range
De-
fault
value
A
EXPOSURE LEVEL
(ALL)
(ALL)
Exposure data (all)
1 - 99
50
Click on the first or last page to see other MX-M850 (serv.man37) service manuals if exist.