Sharp MX-M700U (serv.man7) User Manual / Operation Manual ▷ View online
LOADING PAPER
2-7
2
Loading paper in paper tray 5 (optional large capacity tray
AR-LC6)
AR-LC6)
The large capacity tray can hold up to 3,500 sheets of A4 size (8-1/2" x 11") SHARP standard paper (80
g/m
2
(20 lbs.)). If you wish to change the paper size, please consult your dealer (the paper size must be changed by a
service technician).
service technician).
1
Pull the tray out until it stops.
When the tray is in
operation, do not use
excessive force to pull
the tray out. This may
damage the tray.
operation, do not use
excessive force to pull
the tray out. This may
damage the tray.
2
Place the paper in the centre of the paper
table.
table.
The paper stack must
not be higher than the
indicator line (up to
3,500 sheets of SHARP
standard paper (80
not be higher than the
indicator line (up to
3,500 sheets of SHARP
standard paper (80
g/m
2
(20 lbs.))
If the paper type was
changed, be sure to change the appropriate
settings as explained in "Setting the paper type
and paper size" (See page 2-14).
settings as explained in "Setting the paper type
and paper size" (See page 2-14).
3
Push the tray firmly all the way into the
machine.
machine.
The paper table will
automatically rise to the
paper feed position.
automatically rise to the
paper feed position.
■ Specifications
Specifications are subject to change for improvement without notice.
Name
Large capacity tray (AR-LC6)
Paper size
A4 (8-1/2" x 11")
Paper weight
60 to 105
g/m
2
(16 to 28 lbs.)
Paper capacity (plain)
3500 sheets (80
g/m
2
(20 lbs.))
Dimensions
376 mm (W) x 546 mm (D) x 518 mm (H)
(14-23/32" (W) x 21-1/2" (D) x 20-13/32" (H))
(14-23/32" (W) x 21-1/2" (D) x 20-13/32" (H))
Power supply
Supplied from the main unit
Weight
Approximately 28.5 k
g (62.9 lbs.)
Overall dimensions when
attached to machine
attached to machine
1347 mm (W) x 679 mm (D)
(53-3/64" (W) x 26-47/64" (D))
(53-3/64" (W) x 26-47/64" (D))
LOADING PAPER
2-8
Loading paper in paper tray 5 (optional large capacity tray
AR-LC7)
AR-LC7)
An optional large capacity tray (AR-LC7) is available for the machine. The AR-LC7 can hold up to 3000 sheets of
80
80
g/m
2
(20 lbs.) paper. (See the following "Specifications" for the types of paper that can be used in the large
capacity tray.)
When installed, the AR-LC7 operates as "Tray 5". The AR-LC7 cannot be used together with the AR-LC6 described
on page 2-7.
When installed, the AR-LC7 operates as "Tray 5". The AR-LC7 cannot be used together with the AR-LC6 described
on page 2-7.
■ Part names
■ Specifications
* The indicated sizes of plain paper can be used.
When using the AR-LC7, refer also to "More
information on plain paper" on page 2-13.
information on plain paper" on page 2-13.
Specifications are subject to change for improvement
without notice.
without notice.
NOTES
● If you wish to change the paper size, please consult
● If you wish to change the paper size, please consult
your dealer (the paper size must be changed by a
service technician).
service technician).
● Do not use curled or folded paper. This may cause
misfeeds.
● When the tray has been pulled out, do not place
heavy objects on the tray or press down on the tray.
● Do not place any objects on the large capacity tray
or use it instead of a chair or step. This may
damage the tray and interfere with the use of the
bypass tray.
damage the tray and interfere with the use of the
bypass tray.
Operation button /
Indicator
Indicator
To load paper in the tray,
press this button, wait until
the indicator turns off, and
then pull the tray out.
press this button, wait until
the indicator turns off, and
then pull the tray out.
Top cover
Open this cover to
remove a misfeed.
remove a misfeed.
Paper size display
● Load paper in the tray with the print side face up.
However, if the paper type is "PRE-PRINTED" or
"LETTER HEAD", load the paper with the print side
face down*.
"LETTER HEAD", load the paper with the print side
face down*.
* If the two-sided function is disabled using
"DISABLING OF DUPLEX" in the administrator
settings (page 11 of the administrator settings
guide), load the paper face up.
settings (page 11 of the administrator settings
guide), load the paper face up.
Name
Large capacity tray (AR-LC7)
Paper sizes*
A3 (11" x 17"), B4 (8-1/2" x 14"),
A4 (8-1/2" x 11"), A4R (8-1/2" x 11"R)
Paper weight 60 to 105
A4 (8-1/2" x 11"), A4R (8-1/2" x 11"R)
Paper weight 60 to 105
g/m
2
(16 to
28 lbs.)
Number of
paper trays
/Paper capacity
paper trays
/Paper capacity
One tray 3000 sheets (80
g/m
2
or
20 lbs.)
Power supply
Supplied from the machine
Dimensions
690mm (W) x 587mm (D) x 521.5mm
(H) (27-5/32" (W) x 23-7/64" (D) x
20-17/32" (H))
(H) (27-5/32" (W) x 23-7/64" (D) x
20-17/32" (H))
Weight
Approx. 50 k
g (Approx. 110 lbs.)
LOADING PAPER
2-9
2
■ Loading paper in the AR-LC7
If the paper runs out during printing, a message will appear in the display. Follow the procedure below to load
paper.
paper.
1
Pull the tray out until it stops.
Pull the finger grip up
and pull the tray out
until it stops.
and pull the tray out
until it stops.
2
Place the paper on the paper table.
The paper stack must
not be higher than the
indicator line.
When the paper tray is
pulled out, the paper
table will have
descended to a
position where
not be higher than the
indicator line.
When the paper tray is
pulled out, the paper
table will have
descended to a
position where
approximately 500 sheets of A4 size (8-1/2" x 11")
80
80
g/m
2
(20 lbs.) paper can be placed. After the
paper is placed, the paper table will descend to a
position where an additional approximately 500
sheets can be placed. When the paper table has
descended all the way, approximately 3000 sheets
can be held.
If a different type of paper is loaded that was used
previously, the paper settings for tray 5 must be
changed on the machine. Be sure to change to the
appropriate settings as explained in "Setting the
paper type and paper size" on page 2-14.
position where an additional approximately 500
sheets can be placed. When the paper table has
descended all the way, approximately 3000 sheets
can be held.
If a different type of paper is loaded that was used
previously, the paper settings for tray 5 must be
changed on the machine. Be sure to change to the
appropriate settings as explained in "Setting the
paper type and paper size" on page 2-14.
3
Push the tray firmly all the way into the
machine.
machine.
After the tray is pushed
in, the indicator will
blink until the paper
table finishes
ascending and then
light solidly.
in, the indicator will
blink until the paper
table finishes
ascending and then
light solidly.
NOTE
To add or change paper, press the operation button.
When the button is
pressed, the indicator
will blink until the paper
table stops descending.
Do not pull the tray out
until the indicator turns
off. Attempting to pull
pressed, the indicator
will blink until the paper
table stops descending.
Do not pull the tray out
until the indicator turns
off. Attempting to pull
the tray out when the indicator is blinking or solidly lit
may damage the tray.
may damage the tray.
Indicator
line
line
CAUTION
When loading paper, take care not to insert your
hands into holes on paper table.
hands into holes on paper table.
NOTES
Do not insert objects in
the tray or attempt to
place spare paper in
the tray. This may
damage the tray.
the tray or attempt to
place spare paper in
the tray. This may
damage the tray.
● Use SHARP-recommended paper (page 2-22).
Special paper cannot be used.
Do not insert your
hands here.
hands here.
LOADING PAPER
2-10
Loading paper in the bypass tray
The bypass tray can be used to print on plain paper, postcards, label sheets, tabbed paper, and other special papers.
When using SHARP standard paper, up to 100 sheets can be loaded (up to 20 postcards) for continuous printing
similar to the other trays. For the paper types that can be used in the bypass tray, see "Specifications of paper trays
(Types and sizes of paper that can be used in the trays)" on page 2-12.
When using SHARP standard paper, up to 100 sheets can be loaded (up to 20 postcards) for continuous printing
similar to the other trays. For the paper types that can be used in the bypass tray, see "Specifications of paper trays
(Types and sizes of paper that can be used in the trays)" on page 2-12.
1
Open the bypass tray.
When loading A3, B4,
A4R, 11" x 17", 8-1/2" x
14", 8-1/2" x 13" or
8-1/2" x 11"R size paper,
be sure to pull the
auxiliary tray all the way
out. If the auxiliary tray is
A4R, 11" x 17", 8-1/2" x
14", 8-1/2" x 13" or
8-1/2" x 11"R size paper,
be sure to pull the
auxiliary tray all the way
out. If the auxiliary tray is
not pulled all the way out, the size of the loaded
paper will not be correctly displayed.
paper will not be correctly displayed.
2
Set the bypass tray guides to the width of
the copy paper.
the copy paper.
3
Insert the copy paper all the way into the
bypass tray. (Do not force the paper in.)
bypass tray. (Do not force the paper in.)
Place the copy paper
face up. If the bypass
tray guides are set wider
than the copy paper, the
inside of the machine
may become soiled,
resulting in smudges on
face up. If the bypass
tray guides are set wider
than the copy paper, the
inside of the machine
may become soiled,
resulting in smudges on
succeeding copies. A gap may cause skewing
or wrinkling.
or wrinkling.
4
Set the type and size of the paper loaded in
the bypass tray.
the bypass tray.
If the paper size was changed from an AB size to an
inch size, or from an inch size to an AB size, or if the
paper type was changed, be sure to change the
appropriate settings as explained in "Setting the
paper type and paper size" (see page 2-14).
inch size, or from an inch size to an AB size, or if the
paper type was changed, be sure to change the
appropriate settings as explained in "Setting the
paper type and paper size" (see page 2-14).
5
This completes the procedure for loading
paper in the bypass tray.
paper in the bypass tray.
■ Loading tabbed paper in the bypass
tray
[Example]
Make sure that the positions of the tabs correspond
with the originals as shown below.
Make sure that the positions of the tabs correspond
with the originals as shown below.
Place the tabbed paper face up.
NOTE
After loading the paper in the bypass tray, be sure to set the paper type and size (step 4) if these were changed.
ABC
DEF
GHI
JKL
Front side
1st page
1st page
2nd page
2nd page
3rd page
3rd page
4th page
4th page
Tabbed paper
Original
Front
Click on the first or last page to see other MX-M700U (serv.man7) service manuals if exist.