Sharp MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man17) Service Manual ▷ View online
MX-M503N SIMULATION 5 – 26
24-4
Purpose
Data clear/Reset
Function (Purpose) Used to clear the maintenance counter, the
printer counters of the transfer unit and the
fusing unit.
fusing unit.
Section
Operation/Procedure
1)
1)
Select the item to be cleared with the touch panel key.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
24-5
Purpose
Data clear/Reset
Function (Purpose) Used to clear the developer counter.
Section
Section
Toner supply, developing
Operation/Procedure
1)
1)
Select the item to be cleared with the touch panel key.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
NOTE: When SIM25-2 is executed, this counter is also cleared
automatically.
automatically.
24-6
Purpose
Data clear/Reset
Function (Purpose) Used to clear the copy counter.
Section
Section
Operation/Procedure
1)
1)
Select the item to be cleared with the touch panel key.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
24-7
Purpose
Data clear/Reset
Function (Purpose) Used to clear the OPC drum counter.
Section
Section
Photoconductor
Operation/Procedure
1)
1)
Select the item to be cleared with the touch panel key.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
MAINTENANCE ALL
Maintenance counter (Total)
FUSER WEB SEND
Fuser web send counter
FUSER WEB
Fuser web print counter
FUSER WEB DAY
Fuser web unit use day
Developer cartridge print counter (K)
Developer cartridge accumulated traveling distance (cm) (K)
Number of day that used developer (Day) K
Developer cartridge accumulated traveling distance (cm) (K)
Number of day that used developer (Day) K
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
0$,17(1$1&(&2817(5&/($5
0$,17(1$1&($//
)86(5:(%6(1'
)86(5:(%'$<
)86(5:(%
)86(581,7/ (
)86(5'$</ (
)86(5'$<8
ǂ
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
'(9(/23(5&2817(5'$7$&/($5
.
&
<
0
$5(<28685("
<(6
12
(;(&87(
COPY BW
Copy counter (B/W)
Drum cartridge print counter (K)
Drum cartridge accumulated traveling distance (cm) (K)
Number of day that used drum (Day) K
Drum cartridge accumulated traveling distance (cm) (K)
Number of day that used drum (Day) K
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
&23<&2817(5'$7$&/($5
&23<%:
&23<&2/
&2/25
6,1*/(&2/25
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
'580&75*&2817(5&/($5
.
&
<
0
$5(<28685("
<(6
12
(;(&87(
MX-M503N SIMULATION 5 – 27
24-9
Purpose
Data clear/Reset
Function (Purpose) Used clear the printer mode print counter
and the self print mode print counter.
Section
Operation/Procedure
1)
1)
Select the item to be cleared with the touch panel key.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
24-10
Purpose
Data clear/Reset
Function (Purpose) Used to clear the FAX counter.
(Only when FAX is installed)
Section
FAX unit (TEL/LIU, FAX control PWB)
Operation/Procedure
1)
1)
Select the item to be cleared with the touch panel key.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
24-15
Purpose
Data clear/Reset
Function (Purpose) Used to clear the counters related to the
scan mode and the image send.
Section
Operation/Procedure
1)
1)
Select the item to be cleared with the touch panel key.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
24-30
Purpose
Data clear/Reset
Function (Purpose) Used to initialize the administrator pass-
word.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The administrator password is initialized.
The administrator password is initialized.
If the administrator password of system setting and Web page is
forgotten, execute this simulation to set the password to "admin"
(default).
forgotten, execute this simulation to set the password to "admin"
(default).
PRINT BW
Print counter (B/W)
OTHER BW
Other counter (B/W)
FAX OUTPUT
FAX Print quantity counter (for line 1)
FAX SEND
FAX send counter
FAX RECEIVED
FAX receive counter
SEND IMAGES
FAX send quantity counter (for line 1)
SEND TIME
FAX send time
RECEIVED TIME
FAX receive time
ACR SEND
Number of carrier prefix adding communications
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
35,1727+(5&2817(5&/($5
35,17%:
27+(5%:
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)$;&2817(5'$7$&/($5
)$;ǂ287387
6(1'ǂ,0$*(6
5(&(,9('ǂ7,0(
6(1'ǂ7,0(
$&5ǂ6(1'
$5(<28685("
<(6
12
(;(&87(
)$;ǂ5(&(,9('
)$;ǂ6(1'
NET SCN ORG_B/W
Network scanner document read quantity
counter (B/W scan job)
counter (B/W scan job)
NET SCN ORG_CL
Network scanner document read quantity
counter (COLOR scan job) (N model only)
counter (COLOR scan job) (N model only)
INTERNET FAX OUTPUT
Number of internet FAX output
INTERNET FAX
SEND OUTPUT
SEND OUTPUT
Number of internet FAX sending page
INTERNET FAX
RECEIVE
RECEIVE
Number of internet FAX receive
INTERNET FAX SEND
Number of internet FAX send
MAIL COUNTER
Number of times of E-MAIL send
FTP COUNTER
Number of FTP send
SMB SEND
Number of SMB send
USB CNT
Number of times of USB storage
TRIAL MODE_B&C
Trial mode counter (B/W & COLOR scan job)
SCAN TO HDD_B/W
SCAN TO HDD record quantity (B/W)
SCAN TO HDD_CL
SCAN TO HDD record quantity (COLOR)
(N model only)
(N model only)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
1(7:25.6&$11(5&2817(5'$7$&/($5
1(76&125*B%:
1(76&125*B&/
,17(51(7)$;ǂ287387
,17(51(7)$;6(1'ǂ287387
,17(51(7)$;ǂ5(&(,9(
,17(51(7ǂ)$;ǂ6(1'
0$,/&2817(5
)73&2817(5
60%6(1'
86%&17
75,$/02'(B% &
6&$172+''B%:
6&$172+''B&/
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$'0,13$66:25',1,7,$/,=(
$5(<28685("
<(6
12
(;(&87(
MX-M503N SIMULATION 5 – 28
24-31
Purpose
Data clear/Reset
Function (Purpose) Used to initialize the service mode (Web
page) password.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The service mode password is initialized.
The service mode password is initialized.
If the password of Web page is forgotten, execute this simulation to
set the password to "service" (default).
set the password to "service" (default).
25
25-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the devel-
oping section, and to display the toner den-
sity detection level.
sity detection level.
Section
Toner supply, developing
Operation/Procedure
1)
1)
Press [EXECUTE] key.
The developing motor and the OPC drum motor rotate for 3
minutes and the output level of the toner density sensor is dis-
played.
The developing motor and the OPC drum motor rotate for 3
minutes and the output level of the toner density sensor is dis-
played.
NOTE: The toner cartridge must be removed before executing this
simulation.
If this simulation is executed with the toner cartridge
installed, toner will be forcibly supplied to the developing
unit, resulting in over toner and a trouble.
If this simulation is executed with the toner cartridge
installed, toner will be forcibly supplied to the developing
unit, resulting in over toner and a trouble.
25-2
Purpose
Setting
Function (Purpose) Used to make the initial setting of toner
density when replacing developer. (Auto-
matic adjustment)
matic adjustment)
Section
Toner supply, developing
Operation/Procedure
1)
1)
Press [EXECUTE] key.
The developing motor rotates for 3 minutes, and the toner density
sensor makes sampling of the toner density. The detected level is
displayed.
After stopping the developing motor, the average value of the toner
density sampling results is set as the reference toner density con-
trol level.
sensor makes sampling of the toner density. The detected level is
displayed.
After stopping the developing motor, the average value of the toner
density sampling results is set as the reference toner density con-
trol level.
NOTE: When the above operation is interrupted on the way, the
reference toner concentration level is not set. Also when
error code of EE-EC, EE-EL or EE-EU is displayed, the ref-
erence toner density level is not set normally.
error code of EE-EC, EE-EL or EE-EU is displayed, the ref-
erence toner density level is not set normally.
Do not execute this simulation unless new Developer material has
been installed. If it is executed in other cases, under toner or over-
tone may occur, causing a trouble.
been installed. If it is executed in other cases, under toner or over-
tone may occur, causing a trouble.
Adjustment result data display
Data display during execution
Display in case of an error
TCD_K
Toner density detection level K
TCV_K
Toner density sensor output voltage level K
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6(59,&(3$66:25',1,7,$/,=(
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
721(56(1625287387021,725
(;(&87(
7&'B.
7&9B.
(;(&87(
0,''/(
/2:
Item/Display
Content
AT DEVE ADJ _K
Toner density adjustment value
AT DEVE VO _K
Toner density sensor control voltage level
Item/Display
Content
TCD_K
Toner density sensor detection level K
TCV_K
Toner density sensor control voltage level K
Error display
Content
Details of content
EE-EL
EL abnormality
Sensor output level less than 67, or
sensor control voltage level over 197
sensor control voltage level over 197
EE-EU
EU abnormality
Sensor output level over 154, or sensor
control voltage level less than 49
control voltage level less than 49
EE-EC
EC abnormality
The sampling level in the automatic
toner density adjustment is outside of
100
toner density adjustment is outside of
100
5.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$8720$7,&'(9(/23(5$'-8670(17
(;(&87(
$7'(9($'-B.
$7'(9(92B.
.
&
0
<
MX-M503N SIMULATION 5 – 29
26
26-1
Purpose
Setting
Function (Purpose) Used to set the paper exit operation from
the right side.
Section
Paper exit section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key. (The set value is saved.)
This setting is required to use the paper exit tray unit (MX-TRX1).
26-2
Purpose
Setting
Function (Purpose) Used to set the paper type and the weight
type.
Section
Paper feed, paper reverse/transport
Operation/Procedure
Select a paper size to be changed with the touch panel.
Select a paper size to be changed with the touch panel.
26-3
Purpose
Setting
Function (Purpose) Used to set the specifications of the auditor.
(Japan only)
Section
Auditor
Operation/Procedure
Select an item to be set with the touch panel.
Select an item to be set with the touch panel.
Item/Display
Content
A
0
YES
Paper exit tray: YES
1
NO
Paper exit tray: NO
LCC
0
8.5 x 11
1
A4
2
B5
G/LBS SET
0
GRAM
1
LBS
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
5,*+775$<6(783
$˖
˷̚˹
˖<(612
$˖
2.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6,=(6(783
h
%
$
/&&
˖
*5$0
/%6
*/%66(7
˖
Item/Display
Content
Default
value
BUILT-IN
AUDITOR
AUDITOR
P10
Built-in auditor mode
(standard mode) operation.
(standard mode) operation.
P10
EC1
EC1 mode operation
OUTSIDE
AUDITOR
AUDITOR
NONE
No external connection
vendor is used.
vendor is used.
NONE
P VENDOR1
Coin vendor mode
(Only the copy mode can be
controlled.)
(Only the copy mode can be
controlled.)
P VENDOR2
Vendor mode communicating
with the parallel I/F (for
DocuLyzer) (Japan only)
with the parallel I/F (for
DocuLyzer) (Japan only)
VENDOR-EX
(*1)
(*1)
Vendor I/F for EQUITRAC
VENDOR-EX
(MULTI) (*1)
(MULTI) (*1)
VENDOR-EX + Multi job
cueing Enable mode
cueing Enable mode
P OTHER
NOT USED
S_VENDOR
Serial vendor mode
DOC ADJ
ON
Support for the auditor in
document filing print
document filing print
OFF
OFF
No support for the auditor in
document filing print
document filing print
PF ADJ
ON
Continuous printing is
performed in the duplex print
mode.
If the remaining money
expires during continuous
printing, the sheets in the
machine are discharged
without being printed on the
back surfaces.
performed in the duplex print
mode.
If the remaining money
expires during continuous
printing, the sheets in the
machine are discharged
without being printed on the
back surfaces.
OFF
OFF
Continuous printing is not
performed in the duplex print
mode. (The remaining
amount is checked for
printing every surface in all
the printing process.)
If the remaining money
expires during printing, the
sheet is discharged without
printing on the back surface.
performed in the duplex print
mode. (The remaining
amount is checked for
printing every surface in all
the printing process.)
If the remaining money
expires during printing, the
sheet is discharged without
printing on the back surface.
VENDOR
MODE (*2)
MODE (*2)
MODE1
Vendor mode 1
MODE
3
MODE2
Vendor mode 2
MODE3
Vendor mode 3
COUNTUP
TIMING
TIMING
FUSER_IN
When the paper lead edge
passes the fusing rear
sensor.
passes the fusing rear
sensor.
EXIT_
OUT
FUSER_OUT
When the paper rear edge
passes the fusing rear
sensor.
passes the fusing rear
sensor.
EXIT_OUT
When the paper rear edge
passes the paper exit sensor
in the main unit, the right tray,
and the after process unit.
passes the paper exit sensor
in the main unit, the right tray,
and the after process unit.
IMS
CONTROL
CONTROL
ON
There is some restriction in
the image send mode.
the image send mode.
OFF
OFF
There is no restriction in the
image send mode.
image send mode.
Click on the first or last page to see other MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man17) service manuals if exist.