MX-M264N, MX-M264NR, MX-M264NV, MX-M264U, MX-M314N, MX-M314NR, MX-M314NV, MX-M314U, MX-M354N, MX-M354NR, MX-M354U (serv.man104). Firmware Revision Version 0200c1_A. — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
MX-M264N MX-M264NR MX-M264NV MX-M264U MX-M314N MX-M314NR MX-M314NV MX-M314U MX-M354N MX-M354NR MX-M354U (serv.man104)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
19.42 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Firmware Revision Version 0200c1_A.
File
mx-m264n-mx-m264nr-mx-m264nv-mx-m264u-mx-m314n-mx-.pdf
Date

View Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man104) Technical Bulletin online

 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
 
 
1/3 
TECHNICAL BULLETIN 
Date:  
24
th
 August 2012 
Model:  
MX-M264N/M314N/M354N 
Ref.:  
DCE864 
Colour:  
 
White 
Page:  
1 of 3 
ROM UPGRADE ..... (4). 
 
1. Model Name: MX-M264N/M314N/M354N 
 
2. Description: 
Upgrade of ICU and PCU ROM 
From Mid-June 2012 production 
Packing label 
ICU PCU SCU 
B00 u200c1 
0110c1 
0100c1 
  * ICU above is the version described in the ROM management label. 
    Check the actual version is ICU(MAIN): u2.00.c1/ICU(BOOT): u1.00.c1/ICU(SUB): 01.02.c1/ 
    LANGUAGE: 01.05.c1/GRAPHIC: 01.01.c1 by SIM22-5.   
    Item of change: See the attached sheet. 
 
 
 
 
ROM Version Combination History Table 
No Packing 
label  ICU 
PCU SCU  Action 
S/I 
No. 
(3) 
A05 
u101c1 0101c1 0100c1  2012/3 
Mid  DCE-861 
(2) 
A04 
u100c1 0101c1 0100c1  2012/3 
Mid  DCE-856 
(1) 
A03 
u100c1 0100c1 0100c1  2012/3 
Mid  DCE-861 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
2/3 
[Description] 
No. Item 
Details 
Sharp Desk Mobile 
Modification has been made not to display the registration confirmation message on the 
operation panel of the main unit when registering the profile with Scan function of Sharp 
Desk Mobile. 
2 UI 
The feature to change the color of 2-line message from Gradation pattern to Single color 
pattern has been added to the controller SOFT SW. 
 
 SIM55-3   SW No. 30  Data 1 
  0: Gradation pattern (Default) 
  1. Single color pattern 
3 UI 
If the paper types/paper sizes that could not be output as the offset was selected when 
setting up the Offset, it used to be that "The paper in the selected tray cannot be used for 
the selected mode" message would be displayed and the resume print was blocked as a 
specification.    Now it has been modified to clear the offset processing automatically 
when executing the job. (no message is displayed) 
4 Web 
Page 
When the "Sys Log" in the Service Web Page was set to "Enable", in some cases, the 
U2 error was caused by the execution of Reboot from the Web Page.    This problem has 
been corrected.   
5 Image 
Send 
When scanning to the USB memory, in some cases, it would fail with "The memory 
becomes full." message even though there was free space in the USB memory.     
This problem has been corrected. 
6 Trouble 
Code 
The U2 trouble that should not have been cleared unless SIM16 was executed could be 
cleared by the power-OFF/ON.    This problem has been corrected.   
(If the corrective firmware for this issue is installed to the machine that U2 trouble was 
cleared only by the power-OFF/ON, the U2 trouble will be displayed when the machine is 
turned ON after the completion of the installation so the appropriate process to clear the 
U2 trouble will be required.) 
7 Network 
When using "Scan to Network Folder", if the Network Folder was specified not with the IP 
address but with the server name (15 characters for the hostname), in some cases, the 
machine hanged up and could not send the data.    This problem has been corrected. 
8 Network 
There were some cases where Scan to E-Mail failed under the network environment that 
a large amount of ARP packets were running.    This problem has been corrected. 
9 Network 
When scanning with OSA, if the application server was Microsoft-IIS/Ver.7.0 or later 
version, the communication error occurred during the data sending by HTTP.    This 
problem has been corrected. 
10 Network 
Modification has been made not to finalize the IP address until the IP information is 
obtained from DHCP server when the setting of DHCP is enabled. 
11 Network 
When accessing to the file server with the sever name, in some cases, Scan to Network 
Folder would be unusable. This problem has been corrected. 
12 Network 
When printing from the machine with the Printer Expansion Kit installed, in some rare 
cases, NIC on the machine side would be disconnected and the data would not be 
printed. This problem has been corrected. 
13 Printer 
The feature to set the printable area to the same level as the previous models has been 
added to the controller SOFT SW.     
 
 SIM55-3   SW No. 27  Data 7 
  0: MX-2310 series/2610 series/3610 series/4110 series/5110 series Spec (Default) 
  1: MX-2600 series/3100 series/4100 series/5001 series Spec 
14 Machine 
Control 
If the optional Paper Drawer (MX-DE18) was installed once and it was removed 
afterward, the "Tray3" which should have not existed was displayed on the operation 
panel.    This problem has been corrected.     
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
3/3 
 
No. Item 
Details 
15 Other 
At the timing of sending the Alert Mail of E-mail RIC, the mode to prevent more than one 
Alert Mails of the same event from being sent out when warming up from the Energy 
Save has been added to the controller SOFT SW.     
 
 SIM55-3   SW No. 28  Data 3 
 0: Allowed: Current operation (Default) 
 1: Not Allowed 
16 Other 
Modification has been made to change the frequency to obtain the information of the 
remaining toner using MIB with SOFT SW.     
 
 SIM55-3   SW No. 32  Data 2 
  0: every 25% (Default) 
 1: every 5% 
 
Page of 3
Display

Download Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man104) Technical Bulletin

Here you can view online or download Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man104) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man104) Copying Equipment. Information contained in Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man104) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).