Sharp MX-M160 / MX-M160D / MX-M160DK (serv.man7) User Manual / Operation Manual ▷ View online
59
COPY FUNCTIONS
4
TWO-SIDED COPIES OF TWO-SIDED ORIGINALS
(ONLY WHEN USING THE RSPF)
(ONLY WHEN USING THE RSPF)
• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"
and 8-1/2" x 11"R.
• Automatic two-sided copying is not possible when the bypass tray is used.
• This copy function cannot be used in combination with dual page copy.
• This copy function cannot be used in combination with dual page copy.
1
Make sure that an original does not
remain on the document glass, and
then adjust the original guides to the
width of your originals and place the
originals face up in the document
feeder tray.
remain on the document glass, and
then adjust the original guides to the
width of your originals and place the
originals face up in the document
feeder tray.
2
Press the [2-SIDED COPY] key.
The duplex mode selection
screen appears.
screen appears.
3
Select "2 to 2" with the [
] or [
] key,
or with the [2-SIDED COPY] key.
4
Press the [OK] key.
You will return to the base
screen.
screen.
5
Set the number of copies and press
the [START] key (
the [START] key (
).
To stop copying in the middle of
a run, press the [C] key.
a run, press the [C] key.
DUPLEX SCAN
DUPLEX SCAN
DUPLEX SCAN
2-SIDED COPY
T
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
ORIGINAL SIZE
COPY MODE
1 to 1
1 to 2
2 to 2
2 to 2
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
COPY MODE
1 to 1
1 to 2
1 to 1
1 to 2
2 to 2
GHI
PQRS
BACK
OK
AN
PY
WXYZ
Pegasus-E_Copy_Ex.book 59 ページ ２００９年７月２２日 水曜日 午後２時４分
60
COPY FUNCTIONS
ONE-SIDED COPIES OF TWO-SIDED ORIGINALS
(ONLY WHEN USING THE RSPF)
(ONLY WHEN USING THE RSPF)
• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"
and 8-1/2" x 11"R.
• Automatic two-sided copying is not possible when the bypass tray is used.
• This copy function cannot be used in combination with dual page copy.
• This copy function cannot be used in combination with dual page copy.
1
Make sure that an original does not
remain on the document glass, and
then adjust the original guides to the
width of your originals and place the
originals face up in the document
feeder tray.
remain on the document glass, and
then adjust the original guides to the
width of your originals and place the
originals face up in the document
feeder tray.
2
Press the [2-SIDED COPY] key.
The duplex mode selection
screen appears.
screen appears.
3
Select "2 to 1" with the [
] or [
] key,
or with the [2-SIDED COPY] key.
4
If you wish to have the orientation of
the back image be opposite the
orientation of the front image, set
"BINDING CHANGE" to "ON" with the
[
the back image be opposite the
orientation of the front image, set
"BINDING CHANGE" to "ON" with the
[
] or [
] key.
If the copies are to be bound at the top, reversing the
orientations of the front and back images will result in a
uniform orientation when the bound copies are viewed (note
that this may depend on the orientation of the originals).
orientations of the front and back images will result in a
uniform orientation when the bound copies are viewed (note
that this may depend on the orientation of the originals).
5
Press the [OK] key.
You will return to the base
screen.
screen.
6
Set the number of copies and press
the [START] key (
the [START] key (
).
To stop copying in the middle of
a run, press the [C] key.
a run, press the [C] key.
DUPLEX SCAN
DUPLEX SCAN
DUPLEX SCAN
2-SIDED COPY
T
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
ORIGINAL SIZE
COPY MODE
1 to 1
1 to 2
2 to 2
2 to 2
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
COPY MODE
1 to 2
2 to 2
1 to 2
2 to 2
2 to 1
BINDING CHANGE
OFF
COPY MODE
1 to 2
2 to 2
1 to 2
2 to 2
2 to 1
BINDING CHANGE
ON
GHI
PQRS
BACK
OK
AN
PY
WXYZ
Pegasus-E_Copy_Ex.book 60 ページ ２００９年７月２２日 水曜日 午後２時４分
61
4
TWO-SIDED COPIES USING THE
BYPASS TRAY
BYPASS TRAY
Follow the steps below to perform two-sided copying manually.
Example: Copying original A and original B onto both sides of the paper
1
Copy original A.
2
Place original B as shown below.
Vertically-oriented
original:
original:
If the original is oriented
vertically, place it in the
same orientation as
original A.
vertically, place it in the
same orientation as
original A.
Horizontally-oriented
original:
original:
Place in the opposite
orientation (rotated 180
degrees) to that of
original A.
orientation (rotated 180
degrees) to that of
original A.
3
Turn the copy of original A over, and
without changing the position of the
edge closest to you, insert it in the
bypass tray.
without changing the position of the
edge closest to you, insert it in the
bypass tray.
Insert the paper all the
way in.
way in.
4
Select the bypass tray with the
[PAPER SELECT] key and then press
the [START] key (
[PAPER SELECT] key and then press
the [START] key (
).
The copies are delivered to the centre tray.
1
2
1
If you are using the MX-M160D/MX-M200D
The MX-M160D/MX-M200D is equipped standard
with an automatic two-sided copying function that
automatically turns over the paper. If paper in "Paper
that can be used for automatic 2-sided printing" on
page 18 is used, this enables easier two-sided
copying than using the bypass tray. See
"TWO-SIDED COPYING" on page 56.
The MX-M160D/MX-M200D is equipped standard
with an automatic two-sided copying function that
automatically turns over the paper. If paper in "Paper
that can be used for automatic 2-sided printing" on
page 18 is used, this enables easier two-sided
copying than using the bypass tray. See
"TWO-SIDED COPYING" on page 56.
1
1
Original A
Copy of
original A
original A
1
1
Original A
Copy of
original A
original A
2
Original B
2
Original B
• Copies made on the back side of paper
should always be made one sheet at a
time using the bypass tray.
time using the bypass tray.
• Straighten curled or wavy paper before
using it. Curled paper may cause
misfeeds, creases, or a poor-quality
image.
misfeeds, creases, or a poor-quality
image.
2
1
1
Copy of
original A
original A
Original B
2
1
1
Copy of
original A
original A
Original B
Note
Pegasus-E_Copy_Ex.book 61 ページ ２００９年７月２２日 水曜日 午後２時４分
62
DUAL PAGE COPY
(Dual page copy)
The dual page copy function produces separate copies of open bound original pages. This function is convenient
when you wish to make a separate copy of each page of a book or other bound document.
when you wish to make a separate copy of each page of a book or other bound document.
1
Place the original on the document
glass, aligning the division between
the pages with the size marker (see
below). Close the SPF.
glass, aligning the division between
the pages with the size marker (see
below). Close the SPF.
Copying will begin from the
page to the right of the size
marker.
page to the right of the size
marker.
2
Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
screen will appear.
3
Press the [OK] key.
The special modes
screen will appear.
screen will appear.
4
Select "DUAL PAGE COPY" with the
[
[
] or [
] key.
5
Press the [OK] key.
A checkmark appears in the
"DUAL PAGE COPY" checkbox
in the special modes screen
and you return to the base
screen.
"DUAL PAGE COPY" checkbox
in the special modes screen
and you return to the base
screen.
6
Make sure that the paper tray with A4
(8-1/2" x 11") paper is selected.
(8-1/2" x 11") paper is selected.
A4R (8-1/2" x 11"R) paper can also be used if
rotation copying is possible in auto paper select
mode.
rotation copying is possible in auto paper select
mode.
7
Select any other copy settings as
needed and press the [START] key
(
needed and press the [START] key
(
).
To cancel dual page copy, select "DUAL PAGE
COPY" (which has a checkmark) in the special modes
screen once again and press the [OK] key.
COPY" (which has a checkmark) in the special modes
screen once again and press the [OK] key.
• A4 (8-1/2" x 11") paper can be used for dual page copying.
• When rotation copy is enabled, A4R (8-1/2" x 11"R) paper can also be used.
• When used in combination with XY zoom copying, enlargement is not possible.
• Dual page copying cannot be used in combination with the following functions:
• When rotation copy is enabled, A4R (8-1/2" x 11"R) paper can also be used.
• When used in combination with XY zoom copying, enlargement is not possible.
• Dual page copying cannot be used in combination with the following functions:
• 2 in 1 / 4 in 1 copying
• Centre erase / Edge + Centre erase
• Enlargement
• Automatic ratio selection
• Card shot
• 2-sided to 2-sided copy, 2-sided to 1-sided copy
• Centre erase / Edge + Centre erase
• Enlargement
• Automatic ratio selection
• Card shot
• 2-sided to 2-sided copy, 2-sided to 1-sided copy
• Dual page copying cannot be selected when an original is placed in the SPF.
Original
Copying
Note
To keep the copies in the correct page order
when performing dual page copying over
multiple pages, make sure that the original
is always placed on the document glass with
the smaller page number to the right.
when performing dual page copying over
multiple pages, make sure that the original
is always placed on the document glass with
the smaller page number to the right.
(8
1
/
2
x11 )
B5, A4
Note
EXPOSURE
COLOUR MODE
COLOUR MODE
PAPER SE
RESOLUT
RESOLUT
COPY
SCAN
SCAN
SPECIAL
FUNCTION
LINE
DATA
DATA
ON LINE
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
PAPER SIZE SET
DISPLAY CONTRAST
GHI
PQRS
BACK
OK
AN
PY
SPECIAL MODES
MARGIN SHIFT
ERASE
DUAL PAGE COPY
[OK]:ADJUST
DUAL PAGE COPY
[OK]:ADJUST
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
SPECIAL MODES
MARGIN SHIFT
ERASE
MARGIN SHIFT
ERASE
DUAL PAGE COPY
[OK]:OFF ON
OK
MNO
WXYZ
@.-_
AD-END
Pegasus-E_Copy_Ex.book 62 ページ ２００９年７月２２日 水曜日 午後２時４分
Click on the first or last page to see other MX-M160 / MX-M160D / MX-M160DK (serv.man7) service manuals if exist.