DOWNLOAD Sharp MX-FNX10 (serv.man35) Service Manual ↓ Size: 240.66 KB | Pages: 3 in PDF or view online for FREE

Model
MX-FNX10 (serv.man35)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
240.66 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / SADDLE STAPLE JAM (FPPD3_N) NORMALLY A3
File
mx-fnx10-sm35.pdf
Date
PREV: Sharp MX-FNX10 (serv.man34) Service Manual / Technical Bulletin

Sharp MX-FNX10 (serv.man35) Service Manual / Technical Bulletin ▷ View online

 
Date:  
18
th
 November 2009 
Model:  
MX-FN10 
Ref.:  
006 
Colour:  
White 
Page:  
1 of 3 
 
 
 
 
 
 
 
TECHNICAL BULLETIN 
 
 
 
 
 
 
SADDLE STAPLE JAM (FPPD3_N) NORMALLY A3 
 
 
 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
CCE 
 
 
1. Model Name 
 
MX-FN10 
2. Description 
 
When using A3 in saddle staple mode, a jam may occur (FPPD3_N) 
3. Cause 
 Due to the distortion of SD guide (PG19-6 OCW4158K205//) it juts over the paper 
conveyance path, and may cause a jam because the leading edge of the paper is caught 
on the mylar affixed to the SD guide 
                            
 
 
 
 
 
 
 
 
Explanation of jam 
As seen in the diagram below compared to the OK SD guide, the centre of the NG SD guide juts over the PG side 
of  the opposite side, which makes the paper conveyance path narrow. 
 
 
Field Action 
Removing the inner cover and opening the SD jam open guide, you can see the SD guide. 
Reach through the gap and push the SD guide by hand 
Caution 
Do NOT push with hard tipped tool. PG will become distorted. 
Take care not to cut your hands on sharp edges within finisher. 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
CCE 
 
  
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
CCE 
 
Display

Sharp MX-FNX10 (serv.man35) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp MX-FNX10 (serv.man35) Service Manual ↓ Size: 240.66 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp MX-FNX10 (serv.man35) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-FNX10 (serv.man35) Copying Equipment. Information contained in Sharp MX-FNX10 (serv.man35) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

MX-FNX10 (serv.man35) Service Manuals

Preview DownloadPagesSize
MX-FNX10 MX-FN10 Service Manual (Complete) Service Manual 56 17.37 MB
MX-FNX10 (serv.man2) Parts Guide (Revised July 2017). Service Manual / Parts Guide 72 11.09 MB
MX-FNX10 (serv.man22) MACHINE NOISE REDUCED DURING INITIAL OPERATION Service Manual / Technical Bulletin 2 141.44 KB
MX-FNX10 (serv.man40) F1-43 TROUBLE CAUSED BY LOCKED ADJUSTMENT PLATE Service Manual / Technical Bulletin 2 197.65 KB
MX-FNX10 (serv.man23) F1-43 TROUBLE CODE OCCURRENCE RESULTING FROM SADDLE ALIGNMENT GLITCH WHEN POWER IS ON Service Manual / Technical Bulletin 3 356.31 KB
MX-FNX10 (serv.man24) SUPPORT FOR JAMMING (FPPD2_S, ETC.) IN THE SADDLE OPENING Service Manual / Technical Bulletin 3 619.27 KB
MX-FNX10 (serv.man25) IMPROVED PAPER FEEDING PERFORMANCE THROUGH THE SADDLE FOR A3 SIZE, ETC. Service Manual / Technical Bulletin 2 88.14 KB
MX-FNX10 (serv.man26) LASTING SUPPORT FOR THE STAPLER UNIT OPERATION LOCK (F1-08 ERROR CODE) Service Manual / Technical Bulletin 2 104.06 KB
MX-FNX10 (serv.man27) DELIVERY SENSOR LEVER OF THE MAIN UNIT COMING LOOSE WHEN THE RELAY UNIT (MX-RBX3) IS PULLED Service Manual / Technical Bulletin 2 114.32 KB
MX-FNX10 (serv.man28) F1-08 ERROR CAUSED BY AN OPERATION LOCK OF THE STAPLER UNIT Service Manual / Technical Bulletin 3 293.47 KB
MX-FNX10 (serv.man29) GUIDE SR-SG-GP-F R NOT OPENING CAUSING ANGLED PAPER EJECTION Service Manual / Technical Bulletin 2 87.18 KB
MX-FNX10 (serv.man30) FPDD_S JAMMING CAUSED BY THE SPRING OF THE UDG ARM SHAFT BREAKING Service Manual / Technical Bulletin 2 84.58 KB
MX-FNX10 (serv.man31) IMPROVED PAPER FEEDING PERFORMANCE THROUGH THE SADDLE FOR A3 SIZE (FPPD3_N) Service Manual / Technical Bulletin 2 114.12 KB
MX-FNX10 (serv.man32) INCREASE TO THE PAPER SKEW DURING SWITCHBACK TRANSPORT Service Manual / Technical Bulletin 2 72.23 KB
MX-FNX10 (serv.man33) FN10 ROM UPGRADE ... (5).FIX FOR FPDD_S JAMS Service Manual / Technical Bulletin 1 26.16 KB
MX-FNX10 (serv.man34) PART DISCONTINUATION AND PROFILE CHANGE DUE TO PRODUCTION EFFICIENCY INCREASE Service Manual / Technical Bulletin 2 106.98 KB
MX-FNX10 (serv.man36) IMPROVEMENTS TO SADDLE STITCH FINISHER (MX-FN10) Service Manual / Technical Bulletin 4 290.66 KB
MX-FNX10 (serv.man37) ROM UPGRADE ... (2) TO (3) Service Manual / Technical Bulletin 2 39.67 KB
MX-FNX10 (serv.man38) IMPROVEMENT OF SADDLE FINISHER (MX-FN10) Service Manual / Technical Bulletin 16 1.14 MB
MX-FNX10 (serv.man39) ROM UPGRADE 1 Service Manual / Technical Bulletin 1 18.63 KB
MX-FNX10 (serv.man20) ENHANCEMENT FOR JAM CAUSED BY WORN OUT TRANSPORT RIBS ON TOP COVER Service Manual / Technical Bulletin 2 66.14 KB
MX-FNX10 (serv.man19) IMPROVEMENT OF STRENGTH OF SADDLE STITCH GEAR Service Manual / Technical Bulletin 2 206.51 KB
MX-FNX10 (serv.man18) MX-FNX9 FN10 FN11 FN18 PNX6 ROM CHANGE FOR VIRGO 2 MODELS - MX-4140 4141 5140 5141N - BULLETIN ONLY Service Manual / Technical Bulletin 1 19.73 KB
MX-FNX10 (serv.man17) ARE-1123 MXFN10 Firmware Upgrade B88 V01.14.02.00 Model specific separate folders inside (Bulletin Only) Service Manual / Technical Bulletin 1 81.26 KB
MX-FNX10 (serv.man16) ELIMINATION REDUCTION OF SPRINGS FOR PRODUCTIVITY IMPROVEMENT. Service Manual / Technical Bulletin 2 178.66 KB
MX-FNX10 (serv.man15) SETUP OF NEW SERVICE PARTS FOR SADDLE STAPLER AS SINGLE ITEM. Service Manual / Technical Bulletin 2 132.15 KB
MX-FNX10 (serv.man14) CCE-1402 ADDITION OF PROTECTOR SHEET FOR FALL PREVENTION OF A SENSOR PREVENTION OF F1-31 Service Manual / Technical Bulletin 2 197.35 KB
MX-FNX10 (serv.man13) Firmware update (14). Service Manual / Technical Bulletin 1 55.04 KB
MX-FNX10 (serv.man21) CCE-1099 - ENHANCEMENT FOR PAPER MISALIGNMENT OF FOLDING DUE TO SKEW AT SADDLE Service Manual / Technical Bulletin 1 125 KB
MX-FNX10 (serv.man3) Firmware update (14). File contains model specific folders and Technical Bulletin. Driver / Update 2.75 MB
MX-FNX10 (serv.man4) ARE-1123 MXFN10 Firmware Upgrade B88 V01.14.02.00 Model specific separate folders inside (Bulletin Embedded) Driver / Update 2.3 MB
MX-FNX10 (serv.man5) For MX4140N-5141N Models -Production Run September 2013 Driver / Update 267.89 KB
MX-FNX10 (serv.man6) Special firmware for F1-08 problems Driver / Update 1.53 MB
MX-FNX10 (serv.man7) For MXM283 363N and MX453 503N Production Run Date July 2010 - FIX FOR FPDD_S JAMS Driver / Update 223.59 KB
MX-FNX10 (serv.man8) For MX4100 1N and MX5000 1N Production Run Date July 2010 - FIX FOR FPDD_S JAMS Driver / Update 224.46 KB
MX-FNX10 (serv.man9) For MX2600N and MX3100N Production Run Date July 2010 - FIX FOR FPDD_S JAMS Driver / Update 224.47 KB
MX-FNX10 (serv.man10) For MXM283 363N and MX453 503N Production Run Date May 2009 Driver / Update 285.45 KB
MX-FNX10 (serv.man11) For MX4100N and MX5000N Production Run Date May 2009 Driver / Update 286.33 KB
MX-FNX10 (serv.man12) For MX2600N and MX3100N Production Run Date May 2009 Driver / Update 286.33 KB

RANDOM: