Sharp MX-FNX10 (serv.man33) Service Manual / Technical Bulletin ▷ View online
Date:
12
th
July 2010
Model:
MX-FN10
Ref.:
008
Colour:
White
Page:
1 of 1
TECHNICAL BULLETIN
ROM UPGRADE ..... (5).
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-796
1. Model Name:
MX-FN10
(Options for MX2301N/2600 Series/3100 Series/4100 Series/5000 Series, MX-M283N/M363
Series/M453 Series/M503 Series)
Series/M453 Series/M503 Series)
2. Description:
Implementation of ROM upgrades
From June 2010 production
ROM control No.
Version
A35 010502
Reason to change: In order to correct an error described below.
1. When the gripper is processing ejection and the user removes paper from the ejection tray, if
the ejection slot becomes obstructed, the next sheet will not be ejected, and the gripper will go
out of synchronicity and cause a batch ejection hold (FPDD_S).
out of synchronicity and cause a batch ejection hold (FPDD_S).
Note: Because of the ROM upgrade, the parts code of the control PWB has been changed.
However, the ROM upgrade for the control PWB before change is also supported,
therefore, replacing the control PWB is not required.
therefore, replacing the control PWB is not required.
3. Parts Action:
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank
Q'ty Parts
name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1 MX-FN10 ALL 21-19 0CW4170K602N/ 0CW4170K602O/
CW 1
CONTROL PWB
UNIT
UNIT
2010/6 3
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Display
