Sharp MX-C300P / MX-C300PE / MX-C300PL Service Manual ▷ View online
MX-C300P NOTE FOR SERVICING - ii
8) Unstable or slant surface
The unstable place like the unstable pedestal or the tilted place
could affect the print image quality.
The installation place must be strong enough to safely support
the weight of the machine as well as any installed options.
If the machine drops or falls down, it may cause an injury or a
breakdown.
If there are optional paper desks and the copier desks speci-
fied, it is recommendable to use them.
could affect the print image quality.
The installation place must be strong enough to safely support
the weight of the machine as well as any installed options.
If the machine drops or falls down, it may cause an injury or a
breakdown.
If there are optional paper desks and the copier desks speci-
fied, it is recommendable to use them.
4. Note for handling PWB and electronic
parts
parts
When handling the PWB and the electronic parts, be sure to
observe the following precautions in order to prevent against dam-
age by static electricity.
observe the following precautions in order to prevent against dam-
age by static electricity.
1) When in transit or storing, put the parts in an anti-static bag or
an anti-static case and do not touch them with bare hands.
2) When and after removing the parts from an anti-static bag
(case), use an earth band as shown below:
- Put an earth band to your arm, and connect it to the
machine.
- When repairing or replacing an electronic part, perform the
procedure on an anti-static mat.
5.
Note for replacing the LSU
When replacing, be sure to observe the following items.
1) When replacing the LSU, be sure to disconnect the power plug
1) When replacing the LSU, be sure to disconnect the power plug
from the power outlet.
2) When replacing the LSU, follow the procedures described in
this Service Manual.
3) When checking the operations after repairing the LSU, keep all
the parts including the cover installed and perform the opera-
tion check.
tion check.
4) Do not modify the LSU.
5) When visually checking the inside of the machine for the oper-
5) When visually checking the inside of the machine for the oper-
ation check, be careful not to allow laser beams to enter the
eyes.
eyes.
If the above precaution is neglected or an undesignated work is
performed, safety may not be assured.
performed, safety may not be assured.
6.
Note for handling the OPC drum unit, the
transfer unit, and the developer unit
transfer unit, and the developer unit
When handling the OPC drum unit, the transfer unit, and the devel-
oper unit, strictly observe the following items.
If these items are neglected, a trouble may be generated in the
print image quality.
(OPC drum)
1)
oper unit, strictly observe the following items.
If these items are neglected, a trouble may be generated in the
print image quality.
(OPC drum)
1)
Avoid working at a place with strong lights.
2)
Do not expose the OPC drum to lights including interior lights
for a long time.
for a long time.
3)
When the OPC drum is removed from the machine, cover it
with light blocking material. (When using paper, use about 10
sheets of paper to cover it.)
with light blocking material. (When using paper, use about 10
sheets of paper to cover it.)
4)
Be careful not to attach fingerprints, oil, grease, or other for-
eign material on the OPC drum surface.
eign material on the OPC drum surface.
(Transfer unit)
1)
1)
Be careful not to attach fingerprints, oil, grease, or other for-
eign material on the transfer belt and the transfer roller.
eign material on the transfer belt and the transfer roller.
(Developer unit)
1)
1)
Be careful not to attach fingerprints, oil, grease, or other for-
eign material on the developer unit.
eign material on the developer unit.
MX-C300P PRODUCT OUTLINE 1 – 1
MX-C300P
6HUYLFH0DQXDO
[1] PRODUCT OUTLINE
1. System configuration
2. Product list
A.North America
B.Europe
*The same speed in both Color/Monochrome. The same speed in both A4/LTR.
3. Option list
STD: Standard provision, OPT: Option, - : No setting
Product Name
ppm*
Panel
HDD
NIC
Wireless
LAN
Copy
Print
NW
Scan
Fax
iFAX
DF
OSA
SAPL
PCL
PS
MX-C300PL
30ppm
Mono
LCD
No
STD
No
No
No
STD
STD
No
No
No
No
No
MX-C300P
30ppm
Mono
LCD
No
STD
STD
No
No
STD
STD
No
No
No
No
No
Product Name
ppm*
Panel
HDD
NIC
Wireless
LAN
Copy
Print
NW
Scan
Fax
iFAX
DF
OSA
SAPL
PCL
PS
MX-C300PL
30ppm
Mono
LCD
No
STD
No
No
No
STD
STD
No
No
No
No
No
MX-C300P
MX-C300PE
30ppm
Mono
LCD
No
STD
STD
No
No
STD
STD
No
No
No
No
No
Model
Name
Model name
MX-C300P, MXC300PE, MX-C300PL
Feeding equipment
500-SHEET Paper Feed Unit
MX-CS11
OPT
Color Laser Printer
500 sheet paper feed unit
MX-C300P/C300PE/C300PL
SPECIFICATIONS 2 – 1
6HUYLFH0DQXDO
[2] SPECIFICATIONS
1. Basic specifications
A. Engine Specification
B. Engine speed (ppm)
(1)
Tray 1, 2
(2)
Bypass tray
C. Printable area
* No margin print function not provided.
D. Engine resolution
Photo Conductor
OPC(Diameter: Black:
φ30mm, Color: φ30mmx3 pieces)
Recording Electronic
Photo
(Laser)
Development
Dry-Type Dual-Component Magnetic Brush Development
Charging
Charged Saw-Tooth Method Roller Charging
First Transfer
Mid-Transfer (Belt)
Second Transfer
Transfer Roller
Cleaning Counter
Blade
Fusing Heat
Roller
Waste toner disposal
No toner recycling system/Toner collection container system
Continuous toner supply
Not available
Appearance color
Neo White
Paper size
Monochrome
Color
A4R
30
30
8.5x11R, 7.25x10.5R, B5R,16KR
30
30
A5R, 5.5x8.5R
30
30
Paper size
Monochrome
Color
8.5x14, 8.5x13, 8.5x13.4, 8.5x13.5
16
16
A4R
21
21
8.5x11R, 7.25x10.5R, B5R,16KR
21
21
A5R, 5.5x8.5R
21
21
Extra
16
16
OHP(A4R, 8.5x11R)
9
9
Envelope (Monarch, Com-10, DL, C5)
9
9
Heavy paper (A4R,A5R,8.5x11R,8.5x5.5R,16KR)
9
9
Heavy paper (other than above size)
9
9
A4R 202x289
mm
B5R 176x249
mm
A5R 140x202
mm
ExecutiveR 176x249
mm
16KR 187x262
mm
8.5x14 208x348
mm
8.5x13.5 208x335
mm
8.5x13.4 208x342
mm
8.5x13 208x322
mm
8.5x11R 208x271
mm
5.5x8.5R 132x208
mm
Void area
Top: 5mm or less
Rear: 5mm or less
FR Total: 8mm or less
Rear: 5mm or less
FR Total: 8mm or less
Resolution Print
Writing
:
600x600dpi
Smoothing Function
No
Tone Print
1bit
/
2bit
SPECIFICATIONS 2 – 2
E. Paper feed section
(1)
Basic specifications
(2)
Other paper type capacities
(3)
Size of paper which can be fed
Envelope Type
Custom Size
Form
Std: 1-Paper Tray / Multi Bypass Tray
Max: 2-Paper Tray / Multi Bypass Tray
Max: 2-Paper Tray / Multi Bypass Tray
Heater No
Tray
Tray 1
Bypass Tray
Paper Capacity
Standard paper (80g/m2)
250sheets
50 sheets
Paper Size Detection
No
Paper Size Changing Method
Changed by Users
Paper Size Setting for Shipment
AB systems: A4 Inch systems: 8.5x11
Detection of Remaining Paper
Only detects if any paper remains or not
Paper Type
Bypass Tray
Envelope 10
sheets
OHP 10
sheets
Heavy paper
20 sheets
Tab Paper
No
Gloss Paper
1 sheet
Other Special Paper
1 sheet
Paper Feeding Section
Main Unit
Optional
Drawer
Multi Bypass
Paper size
8.5'x14' (Legal)
216x356mm
No
No
Yes
8.5'x13.5' (Asian Legal)
216x343mm
No
No
Yes
8.5'x13.4' (Mexican Legal)
216x340 mm
No
No
Yes
8.5'x13' (Foolscap)
216x330 mm
No
No
Yes
8.5'x11'R (Letter R)
216x279 mm
Yes
Yes
Yes
5.5'x8.5'R (Invoice R)
140x216 mm
Yes
Yes
Yes
ExecutiveR 184x266
mm
Yes
Yes
Yes
A4R 210x297
mm
Yes
Yes
Yes
B5R 182x257
mm
Yes
Yes
Yes
A5R 148x210
mm
Yes
Yes
Yes
A6R 105x148mm
No
No
Yes
16KR 195x270
mm
Yes
Yes
Yes
Envelope
No No
Yes
Custom
No No
Yes
Paper Type
Thin Paper
55-59g/m2 13-16lb bond
No
No
Yes
Plain Paper
60-105g/m2 16-28lb bond
Yes
Yes
Yes
Recycled Paper
Yes
Yes
Yes
Color Paper
Yes
Yes
Yes
Letter Head
Yes
Yes
Yes
Pre-Printed Paper
Yes
Yes
Yes
Pre-Punched Paper
Yes
Yes
Yes
Heavy paper
106-220g/m2 28 lb bond -80 lb Cover
No
No
Yes
221 g/m2 or more 81lb Cover or more
No
No
No
Envelope 75-90g/m2
No
No
Yes
Transparency
No No
Yes
Label
No No
Yes
Tab Paper
No No No
Glossy Paper
125-150g/m2
No
No
Yes
User Setting 1-7
No No No
Type
Size
Monarch
98x191
Com10
105x241
DL
110x220
C5
162x229
AB System (mm)
Inch System (inch)
Min.
Max.
Min.
Max.
Multi Bypass Tray
X
140
356
5_1/2
14
Y
90
216
3_5/8
8_1/2
Click on the first or last page to see other MX-C300P / MX-C300PE / MX-C300PL service manuals if exist.