Sharp MX-B382 (serv.man7) Service Manual ▷ View online
MX-C402SC/MX-B402SC MX-FXX3 (FACSIMILE EXPANSION KIT) 4 – 5
I. Line cable connection
1)
Connect the line cable on the line to the modular jack indicated
as "LINE."
as "LINE."
* When an external telephone is used, wind the line cable
around the ferrite core (included in the package) two turns,
and connect it to the modular jack indicated as "TEL."
and connect it to the modular jack indicated as "TEL."
* After connection, perform the setting of "External telephone
connection" of the system setting (administrator).
J. Installation completion check
1)
Execute SIM 22-10 to check to confirm that the FAX box and
the FAX memory are properly installed.
When the FAX1 is properly connected, "MX-FXX3" is dis-
played.
When the FAX memory is properly connected, "AR-MM9" is
displayed.
the FAX memory are properly installed.
When the FAX1 is properly connected, "MX-FXX3" is dis-
played.
When the FAX memory is properly connected, "AR-MM9" is
displayed.
App
roxim
ately
10 cm
MX-B382/B402 AR-PF1 (BARCODE FONT KIT) 5 – 1
MX-B402
Service Manual
[5] AR-PF1 (BARCODE FONT KIT)
1. Unpacking
A. Check the packed items
2. Installation
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Check to confirm that the operation panel is turned OFF, and
then turn OFF the power switch.
then turn OFF the power switch.
3)
Disconnect the power plug from the power outlet.
B. MFP PWB cover removal
1)
Open the front cover and the paper feed tray 1.
2)
Remove the stopper, slide the left cabinet to the front side and
remove.
remove.
3)
Remove the screw, and remove the MFP PWB cover.
No.
Packed part names
Quantity
1
CD-ROM
1
2
Operation Manual
1
3
Bar code Font ROM
1
AR-PF1 barcode font ROM PWB
1
2
MX-B382/B402 AR-PF1 (BARCODE FONT KIT) 5 – 2
C. Bar code Font ROM installation
1)
Install the Bar code Font ROM.
D. MFP PWB cover installation
1)
Install the MFP PWB cover.
2)
Install the left cabinet.
3)
Close the front cover and the tray 1.
E. Turn on the power of the main unit
1)
Insert the power plug into the power outlet.
2)
Turn ON the power switch.
3)
Turn ON the power switch on the operation panel.
MX-B382/B402 AR-PF1 (BARCODE FONT KIT) 5 – 3
F. PCL expansion font list check
1)
PCL expansion font list check
Select the PCL expansion font list by the procedures described
in the printer test page in the system setup guide.
Check to confirm that the bar code font list is printed.
Select the PCL expansion font list by the procedures described
in the printer test page in the system setup guide.
Check to confirm that the bar code font list is printed.
Font No.
Font name
1
Code128TT-Regular
2
Code128-NarrowTT-Regular
3
Code128-WideTT-Regular
4
Code39HalfInch-Regular
5
Code39OneInch-Regular
6
Code39QuarterInch-Regular
7
Code39SmallHigh-Regular
8
Code39Slim-Regular
9
Code39SmallLow-Regular
10
Code39SmallMedium-Regular
11
Code39Wide-Regular
12
Codabar-Regular
13
Interleaved2of5-Regular
14
Interleaved2of5-Thin-Regular
15
OCR-A
16
OCR-B
17
OCR-B-C39-Regular
18
UPC-Half
19
UPC-Half-Bars
20
UPC-HalfMusic
21
UPC-HalfNarrow
22
UPC-HalfThin
23
UPC-Tall-Regular
24
UPC-TallBarsThin-regular
25
UPC-TallMusicThin-Regular
26
UPC-TallNarrow-Regular
27
UPC-TallThin-regular
28
ZipCodeBarcode-Regular
Click on the first or last page to see other MX-B382 (serv.man7) service manuals if exist.