DOWNLOAD Sharp MX-B382 (serv.man7) Service Manual ↓ Size: 20.77 MB | Pages: 60 in PDF or view online for FREE

MX-B382/B402  MX-B382/B402 (MAIN UNIT)  1 – 9

4)

Select a paper feed tray to be adjusted.
Set A4 (11" x 8.5") paper in each paper feed tray in advance.

5)

Press [EXECUTE] key.
The adjustment pattern is printed out. (Paper is fed from the
selected paper feed tray, and the adjustment pattern of each
paper feed tray is printed out.)

6)

Set the adjustment pattern to the center reference position on
the document table.

NOTE: Fit the adjustment pattern correctly with the document

guide.

7)

Press [EXECUTE] key.

The following item is an automatically adjustment.
* Print image lead edge image position adjustment
* Print image off-center adjustment
Perform the procedures of 6) - 7) for the printed adjustment
pattern of each paper feed tray.

8)

Press [OK] key.
The adjustment result becomes valid.

NOTE: When an error occurs in the automatic adjustment of

SIM50-28, place white paper on the adjustment pattern and
perform the adjustment. 

To use the remote operation panel function, the password for the
remote operation panel function must be entered on the password
input menu displayed on the VNC boot screen. Note that the pass-
word must be set in advance to use the remote operation panel
function.
Let the user make the password, and use SIM26-78 to set it.

1)

Enter the SIM26-78 mode.

2)

Enter the password with 10 key. (Within 5 - 8 digits)
The entered password is displayed on the column of "NEW."
To modify the entered password, use clear key to delete the
password digit by digit.

3)

Press [SET] key, and the password is set.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

(;(&87(

0)7

&6

$'8

&6

&6

&6

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

3/($6(:$,7

12:(;8&87,1*

(;(&87(

5(35,17

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

35,17/($'0)7 &$6 $'8

&$6'6.

35,172))6(70)7 &$6 &$6 $'8

&$6 &$6

'$7$

5(6&$1

5(35,17

5(75<

2.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

523(3$66:25'6(77,1*

35(6(17˖
ǂǂ1(:˖

6(7

MX-B382/B402  MX-B382/B402 (MAIN UNIT)  1 – 10

Check to confirm that the following operations are normal.

There are two USB ports, one on the rear frame side and the other
on the front frame side. A dip switch on the MFP PWB determines
which port is used.
When shipping, the port on the front frame side is valid and the port
on the rear frame side is invalid.
The valid port can be switched by changing the setting of the MFP
PWB DIP SW.
Select the valid USB port according to the user's request.

Use SIM22-6 to print and store the settings and adjustments data
(list).
• When a memory trouble occurs, if the above information is not

available, all the adjustments must be performed from the begin-
ning.

• If the above information is available, the setting and adjustment

values can be directly entered, shortening the servicing time.

1)

If the following option is installed, remove it from the machine.
• Finisher

2)

Remove the following consumable parts from the machine.
• Paper
• Toner cartridge
• Developer cartridge

NOTE: When moving take extreme care to prevent shock or vibra-

tion to the machine as there is a hard drive built into this
product.

Key input operation (Operation panel)
Display (Operation panel)
Paper feed 
operation

Manual paper feed
Main unit paper feed 
tray
Option paper feed unit

With the option paper feed 
unit installed

Paper size 
detection operation

Manual paper feed tray

RSPF operation / 
Duplex copy 
operation

S-S mode
D-S mode
S-D mode
D-D mode

Stapling operation

With the finisher installed

Offset operation

With the finisher installed

OFF

OFF

Valid

Valid

OFF

ON

Valid

Valid

SW1

ON

OFF

SW2

MX-B382/B402  MX-CSX1/CSX2, MX-DS13/DS14 (500-SHEET PAPER FEED UNIT A/B, BASE STAND, ADDITIONAL STAND)  2 – 1

MX-B402

Service Manual

 

1)

Remove the 500 sheet paper feed unit from the polyethylene
bag, and remove the fixing tape and the protection material.

MX-B382/B402  MX-CSX1/CSX2, MX-DS13/DS14 (500-SHEET PAPER FEED UNIT A/B, BASE STAND, ADDITIONAL STAND)  2 – 2

<Precautions for installation>
Before execution of installation, check to confirm that the communi-
cation lamp on the operation panel and the data lamp under it are
not lighted or blinking.

1)

Turn OFF the power switch on the operation panel.

2)

Check to confirm that the operation panel is turned OFF, and
then turn OFF the power switch.

3)

Disconnect the power plug from the power outlet.

Perform the following procedures for every 500-sheet paper feed
unit to be installed.
1)

Remove the tray.

2)

Loosen the manual screws on the left and the right side.

1

Screw (M4 x 10 P tight)

3

1

Adjuster  FL

1

2

Adjuster  FR

1

3

Adjuster  RL

1

4

Adjuster  RR

1

5

Caster unit connection plate B

2

6

Screw

2

1

Metal fixture

2

2

Screw

2

1

1

2

4

3

5

6

1

2