Sharp MX-B201D (serv.man6) Service Manual ▷ View online
MX-FX12 FAX SOFT SWITCH 2 - 12
S
W
41
1
Number of times
of recall in busy
of recall in busy
Used to set the number of times of recall when busy tone is
detected during transmission.
detected during transmission.
2 times
0 Refer to User program
“RECALL TIMES (BUSY)”.
When a value outside the
set range is set, the initial
value is set.
When a value outside the
set range is set, the initial
value is set.
2
0
3
Setting is made in binary input.
0
4
When set to 0, recall is not made.
0
5
Set range
0
0 to 14times
(U.S.A.)
0 to 10 times
(U.K., Germany, France, Middle East)
0 to 9 times
(Singapore, Malaysia, India, Indonesia, Thailand, Vietnam)
0 to 3 times
(China, Hong Kong)
6
0
7
1
8
0
S
W
42
1
Direct send recall
(U.S.A., Canada)
(U.S.A., Canada)
Used to set whether direct send recall wait is allowed or not.
Allow
0
1: Inhibit
0: Allow
2
FAX receive auto
select by CNG
detection
select by CNG
detection
Used to set whether FAX receive auto select is enabled or not when
CNG signal is detected with external telephone used.
CNG signal is detected with external telephone used.
Allow
1
Refer to User program
“FAX SIGNAL AUTO
RECEIVE”.
“FAX SIGNAL AUTO
RECEIVE”.
1: Allow
0: Inhibit
3
Auto receive
select in
answering
telephone
connection mode
select in
answering
telephone
connection mode
Used to set whether auto receive select function in answering
telephone connection mode is enabled or not.
telephone connection mode is enabled or not.
OFF
0
Refer to Main menu “AM
MODE”.
MODE”.
1: ON
0: OFF
4
Inhibited to use
0
5
0
6
0
7
0
8
0
S
W
43
1
V.34 mode
function
function
Used to set whether V.34 mode is enabled or not as a capacity of
own machine in send/receive.
own machine in send/receive.
ON
1
1: ON
0: OFF
2
Inhibited to use
0
3
0
4
V.34 receive
symbol speed
mask
symbol speed
mask
Used to set symbol speed mask in V.34 receive.
3429
1
When a value outside the
set range is set, the initial
value is set.
set range is set, the initial
value is set.
Bit No.
4
5
6
5
2400
0
0
0
0
2743
0
0
1
2800
0
1
0
6
3000
0
1
1
1
3200
1
0
0
3429
1
0
1
7
Inhibited to use
0
8
0
SW
NO.
Data
No.
Item
Switch selection and contents of functions
Initial value
Remark
MX-FX12 FAX SOFT SWITCH 2 - 13
S
W
44
1
Sending speed
Used to set the speed of fax sending.
* If SW43, B1 is off (V.34 mode is off)
and if SW44, B1-4 is less than 6 (not V.34)
---> operate it at speed set in SW44, B1-4.
* If SW43, B1 is off (V.34 mode is off)
and if SW44, B1-4 is over than 7 (V.34)
---> operate it at speed set in SW44, B1-4=5.
V.17-14.4Kbps
* If SW43, B1 is on (V.34 mode is on)
and if SW44, B1-4 is less than 6 (not V.34)
---> operate it at speed set in SW44, B1-4=V.34-33.6Kbps.
* If SW43, B1 is on (V.34 mode is on)
and if SW44, B1-4 is over than 7 (V.34)
---> operate it at speed set in SW44, B1-4
* If SW43, B1 is off (V.34 mode is off)
and if SW44, B1-4 is less than 6 (not V.34)
---> operate it at speed set in SW44, B1-4.
* If SW43, B1 is off (V.34 mode is off)
and if SW44, B1-4 is over than 7 (V.34)
---> operate it at speed set in SW44, B1-4=5.
V.17-14.4Kbps
* If SW43, B1 is on (V.34 mode is on)
and if SW44, B1-4 is less than 6 (not V.34)
---> operate it at speed set in SW44, B1-4=V.34-33.6Kbps.
* If SW43, B1 is on (V.34 mode is on)
and if SW44, B1-4 is over than 7 (V.34)
---> operate it at speed set in SW44, B1-4
33.6 K bps ->
V.34
1
2
1
3
1
4
0
Bit No.
1
2
3
4
0: 2.4 K bps -> V.27ter
0
0
0
0
1: 2.4 K bps -> V.27ter
0
0
0
1
2: 4.8 K bps -> V.27
0
0
1
0
3: 7.2 K bps -> V.29
0
0
1
1
4: 9.6 K bps -> V.29
0
1
0
0
5: 12 K bps -> V.17
0
1
0
1
6: 14.4 K bps -> V.17
0
1
1
0
7: 16.8 K bps -> V.34
0
1
1
1
8: 19.2 K bps -> V.34
1
0
0
0
9: 21.6 K bps -> V.34
1
0
0
1
10: 24.6 K bps -> V.34
1
0
1
0
11: 26.4 K bps -> V.34
1
0
1
1
12: 28.8 K bps -> V.34
1
1
0
0
13: 31.2 K bps -> V.34
1
1
0
1
14: 33.6 K bps -> V.34
1
1
1
0
15: 33.6 K bps -> V.34
1
1
1
1
5
Reception speed
Used to set the speed of fax receiving.
* If SW43, B1 is off (V.34 mode is off)
and if SW44, B5-8 is less than 6 (not V.34)
---> operate it at speed set in SW44, B5-8.
* If SW43, B1 is off (V.34 mode is off)
and if SW44, B5-8 is over than 7 (V.34)
---> operate it at speed set in SW44, B5-8=5.
V.17-14.4Kbps
* If SW43, B1 is on (V.34 mode is on)
and if SW44,B5-8 is less than 6 (not V.34)
---> operate it at speed set in SW44, B5-8=V.34-33.6Kbps.
* If SW43, B1 is on (V.34 mode is on)
and if SW44, B5-8 is over than 7 (V.34)
---> operate it at speed set in SW44, B5-8
* If SW43, B1 is off (V.34 mode is off)
and if SW44, B5-8 is less than 6 (not V.34)
---> operate it at speed set in SW44, B5-8.
* If SW43, B1 is off (V.34 mode is off)
and if SW44, B5-8 is over than 7 (V.34)
---> operate it at speed set in SW44, B5-8=5.
V.17-14.4Kbps
* If SW43, B1 is on (V.34 mode is on)
and if SW44,B5-8 is less than 6 (not V.34)
---> operate it at speed set in SW44, B5-8=V.34-33.6Kbps.
* If SW43, B1 is on (V.34 mode is on)
and if SW44, B5-8 is over than 7 (V.34)
---> operate it at speed set in SW44, B5-8
33.6 K bps ->
V.34
1
6
1
7
1
8
0
Bit No.
5
6
7
8
0: 2.4 K bps -> V.27ter
0
0
0
0
1: 2.4 K bps -> V.27ter
0
0
0
1
2: 4.8 K bps -> V.27
0
0
1
0
3: 7.2 K bps -> V.29
0
0
1
1
4: 9.6 K bps -> V.29
0
1
0
0
5: 12 K bps -> V.17
0
1
0
1
6: 14.4 K bps -> V.17
0
1
1
0
7: 16.8 K bps -> V.34
0
1
1
1
8: 19.2 K bps -> V.34
1
0
0
0
9: 21.6 K bps -> V.34
1
0
0
1
10: 24.6 K bps -> V.34
1
0
1
0
11: 26.4 K bps -> V.34
1
0
1
1
12: 28.8 K bps -> V.34
1
1
0
0
13: 31.2 K bps -> V.34
1
1
0
1
14: 33.6 K bps -> V.34
1
1
1
0
15: 33.6 K bps -> V.34
1
1
1
1
SW
NO.
Data
No.
Item
Switch selection and contents of functions
Initial value
Remark
MX-FX12 FAX SOFT SWITCH 2 - 14
S
W
45
1
Inhibited to use
0
2
0
3
1
4
0
5
0
6
0
7
0
8
0
S
W
46
1
Inhibited to use
0
2
Specification of
rotating direction
duplex back
surface print
rotating direction
duplex back
surface print
Used to set whether the back surface is rotated 180 degrees in
duplex print or not.
When set to 1, the back surface is rotated 180 degrees and printed.
When set to 0, the back surface is not rotated and printed.
duplex print or not.
When set to 1, the back surface is rotated 180 degrees and printed.
When set to 0, the back surface is not rotated and printed.
180 degrees
rotation
1
1: 180 degrees rotation
0: No 180 degrees rotation
3
Priority in the day
of week
of week
Used to set which is indicated first, day or day of week, when date
format is in the sequence of day, month, and year.
When set to 1, day of week is indicated first, and then day is
indicated.
When set to 0, day is indicated first, and then day of week is
indicated.
format is in the sequence of day, month, and year.
When set to 1, day of week is indicated first, and then day is
indicated.
When set to 0, day is indicated first, and then day of week is
indicated.
No
0
1: Yes
0: No
4
Inhibited to use
0
5
Summer time
Used to set whether summer time function is enabled or not.
When set to 1, summer time function is enabled.
When set to 0, summer time function is disabled.
When set to 1, summer time function is enabled.
When set to 0, summer time function is disabled.
Inhibit
0
Refer to Entry Mode “DAY
LIGHT SAVING”.
LIGHT SAVING”.
1: Allow
0: Inhibit
6
PBX setting
(U.S.A., Canada,
U.K., Netherlands,
Luxembourg,
Belgium, Australia,
New Zealand:
Inhibited to use)
(U.S.A., Canada,
U.K., Netherlands,
Luxembourg,
Belgium, Australia,
New Zealand:
Inhibited to use)
Used to set Connect/Not Connect to PBX and to set the external
line connection method when connected to PBX.
line connection method when connected to PBX.
Setting OFF
0
Refer to User program
“PBX SETTING MODE”.
When a value outside the
set range is set, the initial
value is set.
“PBX SETTING MODE”.
When a value outside the
set range is set, the initial
value is set.
Bit No.
6
7
8
7
Setting OFF
0
0
0
0
Flash send
1
0
1
8
ID send
1
1
0
0
S
W
47
1
Inhibited to use
0
2
External
telephone
connection
telephone
connection
Used to set whether external telephone is used or not.
This switch must be set to YES in order to use external telephone.
This switch must be set to YES in order to use external telephone.
Yes
1
1: Yes
0: No
3
Inhibited to use
0
4
0
5
0
6
0
7
0
8
0
S
W
48
1
Tone/Pulse default
setup
setup
Used to set the dial type.
TONE
1
Refer to User program
“DIAL MODE”.
When a value outside the
set range is set, the initial
value is set.
“DIAL MODE”.
When a value outside the
set range is set, the initial
value is set.
Bit No.
1
2
2
10PPS
0
0
0
TONE
1
0
3
Telephone line
menu
menu
Used to set whether tone/pulse setting is displayed on the menu or
not.
not.
Allow
0
1: Inhibit
0: Allow
4
Inhibited to use
0
5
0
6
0
7
0
8
0
SW
NO.
Data
No.
Item
Switch selection and contents of functions
Initial value
Remark
MX-FX12 FAX SOFT SWITCH 2 - 15
S
W
49
1
Inhibited to use
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
S
W
50
1
Line monitor
volume
volume
Used to set on-hook monitor volume and line volume in FAX
communication.
communication.
Medium
1
When SPEAKER key is
pressed, user setting can
be made.
pressed, user setting can
be made.
Bit No.
1
2
2
Silent
0
0
0
Small
0
1
Medium
1
0
Large
1
1
3
Inhibited to use
0
4
0
5
0
6
0
7
0
8
0
S
W
51
1
DTMF send level
(High group) setup
(High group) setup
Used to set high-group send level in DTMF signal send.
–6dBm
0 When a value outside the
set range is set, the initial
value is set.
value is set.
2
Setting is made in binary input in the increment of 1.0dBm.
0
3
Binary input
1
4
Bit No.
Set range
Set range
1
2
3
4
5
0 (0.0dBm) to
21 (–21.0dBm)
1
5
0
6
CED detection
time
time
Used to set detection time of CED/ANSam signal for judgment of
detection.
detection.
1000ms
0
1: 500ms
0: 1000ms
7
Busy tone
detection cycle
detection cycle
Used to set detection cycle of pulses of busy tone for detection of
busy tone.
busy tone.
2puls
0
Bit No.
7
8
8
2puls
0
0
0
4puls
0
1
6puls
1
0
10puls
1
1
S
W
52
1
Busy tone
detection level
detection level
Used to set the mini. Detection level in busy tone detection.
–43dB
0
Bit No.
1
2
–43dB
0
0
2
–35dB
0
1
0
–33dB
1
0
–30dB
1
1
3
Inhibited to use
0
4
Super G3 disabled
in the last call-out
of recall in case of
an error
in the last call-out
of recall in case of
an error
Used to set whether Super G3 is disabled or not in the last call-out
of recall in case of a send error.
When, however, the number of recall in case of a send error is 0,
this function does not operate.
of recall in case of a send error.
When, however, the number of recall in case of a send error is 0,
this function does not operate.
Super G3
disabled
0
1: Super G3 enabled
0: Super G3 disabled
5
Error process in
RTN reception
RTN reception
Used to set whether RTN reception is judged as an error or not.
(Only in G3 mode)
When set to 1, RTN reception is not judged as an error.
When set to 0, RTN reception is judged as an error.
(Only in G3 mode)
When set to 1, RTN reception is not judged as an error.
When set to 0, RTN reception is judged as an error.
Error
0
1: Not error
0: Error
6
DT detection level Used to set the detection level for Dial tone.
–43dB
0
–43dB
0
0
7
–35dB
0
1
0
–33dB
1
0
–30dB
1
1
SW
NO.
Data
No.
Item
Switch selection and contents of functions
Initial value
Remark
Click on the first or last page to see other MX-B201D (serv.man6) service manuals if exist.