DOWNLOAD Sharp MX-B200 (serv.man5) Service Manual ↓ Size: 12.96 MB | Pages: 123 in PDF or view online for FREE

MX-B200  UNPACKING AND INSTALLATION  5 - 6

12) When installing is finished, click the "Close" button.

Caution:

• If you are using Windows Vista/7 and a security warning win-

dow appears, be sure to click "Install this driver software any-
way".

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

A message will appear instructing you to connect the machine
to your computer. Click the "OK" button.

Note: After the installation, a message prompting you to restart

your computer may appear. In this case, click the "Yes"
button to restart your computer.

13) Connect the machine to your computer with a USB cable.

<1> Make sure that the machine is powered on.

<2> Connect the cable to the USB connector (B type) on the

machine.
The USB interface on the machine complies with the USB
2.0 (Hi-Speed) standard. Please purchase a shielded
USB cable.

<3> Connect the other end of the cable to the USB connector

(A type) on your computer. 
The machine is found and a Plug and Play window
appears.

Note: If your computer is not compatible with USB 2.0 (Hi-

Speed), the "USB 2.0 mode switching" setting in the
machine's user program must be set to "Full-Speed". For
more information, see "USER PROGRAMS".

14) Follow the instructions in the plug and play window to install the

driver.
When the "Found New Hardware Wizard" appears, select
"Install the software automatically (Recommended)", click the
"Next" button, and follow the on-screen instructions.

Caution:

• If you are using Windows Vista/7 and a security warning win-

dow appears, be sure to click "Install this driver software any-
way".

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

• If you installed Button Manager, set up Button Manager as

explained in "SETTING UP BUTTON MANAGER".

• If you installed Sharpdesk, the Sharpdesk setup screen will

appear. Follow the instructions in the screen to set up Sharpdesk.

If the machine will be used as a shared printer on a network, follow
these steps to install the printer driver in the client computer.

Note: To configure the appropriate settings in the print server, see

the operation manual or help file of your operating system.

1) Perform steps 2) through 6) in "Installing the software".

2) Click the "Custom" button.

3) Click the "MFP Driver" button.

Click the "Display Readme" button to show information on
packages that are selected.

4) Select "Connected via the network" and click the "Next" button.

MX-B200  UNPACKING AND INSTALLATION  5 - 7

5) Select the printer name (configured as a shared printer).

<1> Select the printer name (configured as a shared printer on

a print server) from the list.
In Windows 2000/XP, you can also click the "Add Network
Port" button displayed below the list and select the printer
to be shared by browsing the network in the window that
appears.

<2> Click the "Next" button.

Follow the on-screen instructions.

Note: If the shared printer does not appear in the list, check the

settings on the print server.

Caution:

• If you are using Windows Vista/7 and a security warning win-

dow appears, be sure to click "Install this driver software any-
way".

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

6) You will return to the window of step 3). Click the "Close" but-

ton.

Note: After the installation, a message prompting you to restart

your computer may appear. In this case, click the "Yes"
button to restart your computer.

This completes the installation of the software.

After installing the MFP driver, you must configure the printer driver
settings appropriately for the size of paper loaded in each.

1) Click the "Start" button, click "Control Panel", and then click

"Printer".

• In Windows 7, click the "start" button and then click "Devices

and Printers".

• In Windows XP, click the "start" button and click "Printers and

Faxes".

• In Windows 2000, click the "Start" button, select "Settings",

and then click "Printers".

Note: In Windows XP, if "Printers and Faxes" does not appear

in the "start" menu, select "Control Panel", select
"Printers and Other Hardware", and then select "Printers
and Faxes".

2) Open the printer properties window.

<1> Right-click the printer driver icon of the machine.

<2> Select "Properties". 

In Windows 7, click the "Printer properties" menu.

3) Click the "Configuration" tab.

4) Click the "Set Tray Status" button and select the size of paper

that is loaded in each tray.
Select a tray in the "Paper Source" menu, and select the size of
paper loaded in that tray from the "Set Paper Size" menu.
Repeat for each tray.

5) Click the "OK" button in the "Set Tray Status" window.

6) Click the "OK" button in the printer properties window.

Button Manager is a software program that works with the scanner
driver to enable scanning from the machine.

To scan using the machine, Button Manager must be linked with
the scan menu on the machine. Follow the steps below to link But-
ton Manager to scanner events.

1) Click the "Start" button, click "Control Panel", click "Hardware

and Sound", and then click "Scanners and Cameras".

• In Windows 7, click the "start" button and then click "Devices

and Printers".

• In Windows XP, click the "start" button, select "Control Panel"

and click "Printers and Other Hardware", and then click
"Scanners and Cameras".

2) Click the "SHARP MX-xxxx" icon and select "Properties".

• In Windows 7, right-click the "SHARP MX-xxxx" icon and

select "Scan properties".

• In Windows XP, select "Properties" from the "File" menu.

3) In the "Properties" screen, click the "Events" tab.

4) Select "SC1:" from the "Select an event" pull-down menu.

5) Select "Start this program" and then select "Sharp Button Man-

ager Y" from the pull-down menu.

6) Repeat Steps 4 and 5 to link Button Manager to "SC2:" through

"SC6:".
Select "SC2:" from the "Select an event" pull-down menu.
Select "Start this program", select "Sharp Button Manager Y"
from the pull-down menu. Do the same for each ScanMenu
through "SC6:".

MX-B200  UNPACKING AND INSTALLATION  5 - 8

7) Click the "OK" button.

Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be
changed with the setting window of Button Manager.
For the factory default settings of the scan menu and the proce-
dures for configuring Button Manager settings, see "Button
Manager settings".

1) Click the "Start" button, select "Settings", and then click "Con-

trol Panel".

2) Double-click the "Scanners and Cameras" icon.

3) Select "SHARP MX-xxxx" and click the "Properties" button.

4) In the "Properties" screen, click the "Events" tab.

5) Select "SC1:" from the "Scanner events" pull-down menu.

6) Select "Sharp Button Manager Y" in "Send to this application".

Note: If other applications are shown, deselect the checkboxes

for the other applications and leave only the Button
Manager checkbox selected.

7) Click the "Apply" button.

8) Repeat Steps 5) through 7) to link Button Manager to "SC2:"

through "SC6:".
Select "SC2:" from the "Scanner events" pull-down menu.
Select "Sharp Button Manager Y" in "Send to this application"
and click the "Apply" button.
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button
to close the screen.

Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be
changed with the setting window of Button Manager.
For the factory default settings of the scan menu and the proce-
dures for configuring Button Manager settings, see "Button
Manager settings".

Type-B connector

Shielded twisted pair cable

(2 m (6 feet) Max.: high-speed transmission equivalent)

The pin numbers and signal names are listed in the following table.

Pin No.

Signal name

1

+5V

2

-DATA

3

+DATA

4

GND

1

2

3

4

MX-B200  UNPACKING AND INSTALLATION  5 - 9

When moving the unit, follow the procedure below.

Note: When moving this unit, be sure to remove the TD cartridge in

advance.

1) Turn the power switch off and remove the power cord from the

outlet.

2) Open the side cover and front cover, in that order. Remove the

TD cartridge and close the front cover and side cover, in that
order.

To open and close the side cover and front cover, and to
remove the TD cartridge.

3) Raise the handle of the paper tray and pull the paper tray out

until it stops.

4) Push the center of the pressure plate down until it locks in place

and lock the plate using the pressure plate lock which has been
stored in the front of the paper tray.

5) Push the paper tray back into the unit.

6) Lock the scan head locking switch.

Note: When shipping the unit, the scan head locking switch must

be locked to prevent shipping damage.

7) Close the multi-bypass tray and the paper output tray exten-

sion, and attach the packing materials and tape which were
removed during installation of the unit.

8) Pack the unit into the carton.

If the machine is installed in a highly humid environment, you can
alleviate dew condensation inside the scanner by installing the
scanner moisture-proof kit described below.

Scanner moisture-proof kit (DKIT-0016QSZZ)

Clean the position where each cushion/mylar is attached with
industrial alcohol before the work.

Turn the main switch to the "OFF" position and remove the power
plug from the outlet.

1) Remove original cover.

2) Remove the rear cabinet.

Remove the three screws and then remove the rear cabinet.

3) Remove the rear cover for the document glass.

<1> Remove the two screws and then remove the right glass

holder.

<2> Slide the rear cover for the document glass to remove it.

<3> Remove the table glass.

4) Attach the Scanner condensation prevention mylar at the 3

positions on the rear side of the main unit as described below.

Note: The hole should be covered with the mylar.

Align the edge of the mylar to the R part (the yellow line in the
diagram below) so that the hole of the metal plate is covered as
much as possible.

Name

Part code

Qty

1

Scanner condensation 
prevention mylar

PSHEZ0493QSZZ

3

2

Optical right hole mylar B

PSHEZ0469QSZZ

2

3

Scanner motor metal plate 
cushion

PMLT-0106QSZZ

2

4

Scanner upper surface cushion

PMLT-0105QSZZ

1

5

Scanner motor lower mylar

PSHEP0600QSZZ

1

6

Scanner UPG mylar J3

PSHEP0599QSZZ

1

7

Fan housing cushion

PMLT-0108QSZ1

1

1

2

3