Sharp MX-B200 (serv.man5) Service Manual ▷ View online
MX-B200 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 1
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance
2. Internal
1
SPF scanning area (Option)
2
Document glass
3
Operation panel
4
Front cover
5
Paper tray 1
6
Paper tray 2 (Option)
7
Multi-bypass tray
8
Side cover
9
Side cover open button
10
Bypass tray paper guides
11
Paper output tray
12
Paper output tray extension
13
Power switch
14
Handle
15
Power cord socket
1
Front cover
2
Side cover
3
Fusing unit release lever
4
Transfer charger
5
Charger cleaner
Interface
USB connector
Original cover
SPF (Peripheral device)
Exit area
Original guides
Document feeder tray
Peep hole
Document
feeder cover
feeder cover
5
4
7
6
9
8
10
11
12
13
14
15
15
3
2
1
1
2
3
4
5
Toner cartridge
Photoconductive
drum
drum
MX-B200 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 2
3. Operation panel
*1: Only operates when an SPF is installed.
*2: Peripheral device.
*3: The indicators of the operation panel may differ depending on the country and region.
1
Sort key and indicators
Use to select sort mode.
Use to select sort mode.
10 SCAN key and indicator
2
Exposure mode selector key and indicators
Use to sequentially select the exposure modes:
AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit indicator.
Use to sequentially select the exposure modes:
AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit indicator.
11 ID CARD key and indicator
Use to copy ID card. For description, see “ID CARD COPY”.
3
Light and dark keys and indicators
Use to adjust the MANUAL or PHOTO exposure level. Selected
exposure level is shown by a lit indicator.
Use to start and terminate user program setting.
Use to adjust the MANUAL or PHOTO exposure level. Selected
exposure level is shown by a lit indicator.
Use to start and terminate user program setting.
12 Start key and indicator
• Copying is possible when the indicator is on.
• Press to start copying.
• Press to start copying.
• Use to set a user program.
4
Alarm indicators
13 Power save indicator
Lights up when the unit is in a power save mode.
Developer replacement required indicator
Misfeed indicator
Toner cartridge replacement required indicator
Maintenance indicator
5
SPF indicator
*1
14 Tray select key
Use to select a paper feed station (paper tray 1, paper tray 2
*2
or
multibypass tray).
6
SPF misfeed indicator
*1
15 Paper feed location indicators
Light up to show the selected paper feed station.
7
Copy ratio selector key
*3
and indicators
Use to sequentially select preset reduction/enlargement copy
ratios.
Selected copy ratio is shown by a lit indicator.
ratios.
Selected copy ratio is shown by a lit indicator.
16 ZOOM keys and indicator
Use to select any reduction or enlargement copy ratio from 25%
to 400% in 1% increments. (When the SPF is being used, the
zoom copy ratio range is 50% to 200%.)
to 400% in 1% increments. (When the SPF is being used, the
zoom copy ratio range is 50% to 200%.)
8
Copy ratio display (%) key/READ-END key
• Use to verify a zoom setting without changing the zoom ratio.
• Use to verify a zoom setting without changing the zoom ratio.
• Use to check the number of originals that must be returned to
the document feeder tray if a misfeed occurs in the machine
when the SPF is used.
when the SPF is used.
• Use to terminate reading originals in sort mode.
17 Copy quantity keys
• Use to select the desired copy quantity (1 to 99).
• Use to make user program entries.
9
Display
Displays the specified copy quantity, zoom copy ratio, user
program code and error code.
Displays the specified copy quantity, zoom copy ratio, user
program code and error code.
18 Clear key
• Press to clear the display, or press during a copy run to
terminate copying.
• Press and hold down during standby to display the total number
of copies made to date.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
MX-B200 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 3
4. Indicators on the operation panel
The start (
) indicator indicates the state of the printer or scan-
ner.
Start indicator
Power save indicator
SCAN indicator
On:
Indicates the unit is ready for copying or scanning
is being performed.
is being performed.
Blinking:
The indicator blinks in the following situations:
• When a print job is interrupted.
• When reserving a copy job.
• When toner is being replenished during a copy
or print job.
Off:
The indicator is off in the following situations:
• During copying or scanning.
• The unit is in the auto power shut-off mode.
• The unit is in the auto power shut-off mode.
• When a misfeed or error has occurred.
• During print online.
On:
Indicates the unit is in a power save mode.
Blinking:
Indicates that the unit is initializing (when the side
cover is opened and closed or the power turned
off and on).
cover is opened and closed or the power turned
off and on).
On:
The SCAN (
) key has been pressed and the
unit is in scanner mode.
Blinking:
A scan job is being executed from the computer,
or scan data is stored in the unit's memory.
or scan data is stored in the unit's memory.
Off:
The unit is in the copy mode.
Power save
indicator
indicator
Start indicator
SCAN indicator
MX-B200 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 4
5. Motors and solenoids
* SPF is option.
2
8
4
1
5
3
6
7
No.
Name
Control signal
Function / Operation
1
Main motor
MM
Drives the copier.
2
Scanner motor
MRMT
Drives the optical mirror base (scanner unit).
3
Toner motor
TM
Supplies toner.
4
Cooling fan motor
VFM
Cools the optical, fusing section.
5
Resist roller solenoid
RRS
Resist roller rotation control solenoid
6
Paper feed solenoid
CPFS1
Cassette Paper feed solenoid 1
7
Multi paper feed solenoid
MPFS
Multi manual pages feed solenoid
8
SPF motor
SPFM
Drives the single pass feeder (Option)
Click on the first or last page to see other MX-B200 (serv.man5) service manuals if exist.