DOWNLOAD Sharp MX-B200 (serv.man5) Service Manual ↓ Size: 12.96 MB | Pages: 123 in PDF or view online for FREE

MX-B200  UNPACKING AND INSTALLATION  5 - 2

Be sure to hold the handles on both sides of the unit to unpack the
unit and carry it to the installation location.

1) Remove all pieces of tape shown in the illustration below.

Then open the SPF and remove protective materials. After
that, take out the bag containing the TD cartridge.

1) 2) 3) Open the side and front cabinets of the copier.

4) Remove the locking tape of the developer unit.

5) Remove the screw which is fixing the copier and Developer

unit.

6) Remove Developer unit slowly from the copier.

7) Remove the screw (1 pc).

8) Remove Upper developer unit.

9) Shake the aluminum bag to stir developer

10) Supply developer from the aluminum bag to the top of the MX

roller evenly.

Note: Be careful not to splash developer outside Developer

unit.

11) Attach Upper developer unit and fix it with a screw.

12) Rotate the MG roller gear to distribute developer evenly.

Note: Never rotate the gear in the reverse direction.

MX-B200  UNPACKING AND INSTALLATION  5 - 3

Note: When carrying Developer unit, do not tilt it extremely as

shown with the arrow in the figure below.
(Prevention of splash of developer)

13) Insert Developer unit carefully into the copier.

Note: Quick insertion may result in splash of developer. Be

sure to insert carefully.

14) Confirm that Developer unit is completely inserted to the bottom

of the machine, fix Developer unit and the machine with a
screw.

15) Completion of Developer unit installation

1) To prevent against uneven distribution of toner, hold Toner unit

with both hands and shake it several times horizontally.

2) Hold the section of Toner unit shown in the figure below,

remove the packing tape, and remove the cushion.

3) Pull out the cushion in the arrow direction.

4) Insert Toner unit carefully into the copier.

5) Insert until the hook is engaged with the copier as shown in the

figure below.

6) Pull out the shutter in the arrow direction.

Note: Do not hold and carry the shutter. Otherwise the shutter

may drop and Toner unit may drop.

7) Completion of Toner unit installation

Close the front and side cabinets.

1) Raise the handle of the paper tray and pull the paper tray out

until it stops.

2) Remove the pressure plate lock. Rotate the pressure plate

lock in the direction of the arrow to remove it while pressing
down the pressure plate of the paper tray.

MX-B200  UNPACKING AND INSTALLATION  5 - 4

3) Store the pressure plate lock which has been removed in step

2). To store the pressure plate lock, rotate the lock to fix it on
the relevant location.

4) Adjust the paper guides on the paper tray to the copy paper

width and length. Squeeze the lever of paper guide (A) and
slide the guide to match with the width of the paper. Move
paper guide (B) to the appropriate slot as marked on the tray.

5) Fan the paper and insert it into the tray. Make sure the edges

go under the corner hooks.

Note: Do not load paper above the maximum height line (

).

Exceeding the line will cause a paper misfeed.

6) Gently push the paper tray back into the unit.

Ensure that the power switch of the unit is in the OFF position. Plug
the other end of the power cord into the nearest outlet. Turn the
power switch on the left side of the unit to the "ON" position. The
start (

) indicator will light up and other indicators which show the

initial settings of the operation panel will also light up to indicate the
ready condition.

The software CD-ROM that accompanies the machine contains the
following software:

The printer driver enables you to use the printer function of the
machine.

The printer driver includes the Print Status Window. This is a utility
that monitors the machine and informs you of the printing status,
the name of the document currently being printed, and error mes-
sages.

The scanner driver allows you to use the scanning function of the
machine with TWAIN-compliant and WIA-compliant applications.

Sharpdesk is an integrated software environment that makes it
easy to manage documents and image files, and launch applica-
tions.

*  Sharpdesk cannot be used in Windows 2000.

Button Manager allows you to use the scanner menus on the
machine to scan a document.

*  The scanning feature can only be used with computers that are

connected to the machine by a USB cable. If you are connected
to the machine by a LAN connection, only the printer function can
be used.

Check the following hardware and software requirements in order to
install the software.

*1: The machine’s USB 2.0 port will transfer data at the speed

specified by the USB 2.0 (Hi-Speed) standard only if the
Microsoft USB 2.0 driver is preinstalled in the computer, or if the
USB 2.0 driver for Windows 2000 Professional/XP/Vista that
Microsoft provides through "Windows Update" is installed.

*2: Compatible with models preinstalled with Windows 2000 Pro-

fessional, Windows XP Professional, Windows XP Home Edi-
tion, Windows Vista, or Windows 7, and which are equipped
standard with a USB interface.

*3: • The machine does not support printing from a Macintosh

environment.

• Administrator's rights are required to install the software

using the installer.

*4: Sharpdesk cannot be installed.

Pressure plate lock

Paper guide (B)

Paper guide (A)

Computer 
type

IBM PC/AT or compatible computer equipped 
with a USB 2.0*

1

/1.1*

2

Operating 
system*

3

Windows 2000 Professional*

4

, Windows XP, 

Windows Vista, Windows 7

Other 
hardware 
requirements

An environment on which any of the operating 
systems listed above can fully operate

MX-B200  UNPACKING AND INSTALLATION  5 - 5

1) The USB cable must not be connected to the machine. 

Make sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. 
If this happens, click the "Cancel" button to close the window
and disconnect the cable.

Note: The cable will be connected in step 13).

2) Insert the Software CD-ROM into your computer's CD-ROM

drive.

3) Click the "Start" button, click "Computer", and then double-click

the CD-ROM icon (

).

• In Windows XP, click the "start" button, click "My Computer",

and then double-click the CD-ROM icon.

• In Windows 2000, double-click "My Computer", and then dou-

ble-click the CD-ROM icon.

4) Double-click the "Setup" icon (

).

• In Windows 7, if a message screen appears asking you for

confirmation, click "Yes".

• In Windows Vista, if a message screen appears asking you

for confirmation, click "Allow".

5) The "SOFTWARE LICENSE" window will appear. Make sure

that you understand the contents of the software license, and
then click the "Yes" button.

Note: You can show the "SOFTWARE LICENSE" in a different

language by selecting the desired language from the
language menu. To install the software in the selected
language, continue the installation with that language
selected.

6) Read the "Readme First" in the "Welcome" window and then

click the "Next" button.

7) To install all of the software, click the "Standard" button and go

to step 12).
To install particular packages, click the "Custom" button and go
to next step.

8) Click the "MFP Driver" button.

Click the "Display Readme" button to show information on pack-
ages that are selected.

9) Select "Connected to this computer" and click the "Next" button.

Follow the on-screen instructions.

Caution:

• If you are using Windows Vista/7 and a security warning win-

dow appears, be sure to click "Install this driver software any-
way".

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

10) You will return to the window of step 8). If you wish to install

Button Manager or Sharpdesk, click the "Utility Software" but-
ton.
If you do not wish to install the Utility Software, click the "Close"
button and go to step 12).

Note: After the installation, a message prompting you to restart

your computer may appear. In this case, click the "Yes"
button to restart your computer.

11) Click the "Button Manager" or the "Sharpdesk" button.

Click the "Display Readme" button to show information on
packages that are selected.
Follow the on-screen instructions.

* In Windows 2000, The "Sharpdesk" button does not appear.