DOWNLOAD Sharp MX-6580N / MX-7580N (serv.man4) Service Manual ↓ Size: 50.67 MB | Pages: 127 in PDF or view online for FREE

MX-7580N  MX-TU14 (EXIT TRAY CABINET)  10 – 1

MX-7580N

Service Manual

 

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.

1)

Fix the rear cover with the screws.

2)

Fix the front right cover with the screws.

Hook the front right cover.  

3)

Fix the exit tray cabinet to the machine with the screw (Packed
items). 

1

Exit tray cabinet

1

2

Front cover

1

3

Paper holding arm

1

4

Full detection actuator

1

5

Screw

6

6

E-ring

1

7

Rear  cover

1

8

Front right cover

1

MX-7580N  MX-TU14 (EXIT TRAY CABINET)  10 – 2

Fit the rib part to the hole of the rear cover.  .  

1)

Attach the front cover, and fix it with the E-ring.

1)

Attach the paper holding arm and the full detection actuator.

 

MX-7580N  MX-RB12 (PAPER PASS UNIT)  11 – 1

MX-7580N

Service Manual

 

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.

1)

Remove the deliverly sponge from the paper exit section as
the figure below.

NOTE: When removing the delivery sponge roller, take care not to

fall the fragment of it.

NOTE: If the fragment was fallen, never fail to remove it.

1)

Fix the L plate (Packed items No.5) to the main unit with the
screw (Packed items No.1).

2)

Install the front cover right (Packed items No.8), and fix the
screw (Packed items No.1).

1

M4 x 7 round-head bind screw

13

2

M4 x 10 mold tap screw

2

3

M4 x 10 S-tight bind screw

1

4

E-ring

1

5

L plate

1

6

Accuride rail

1

7

Paper guide

1

8

Front cover right

1

9

Front cover

1

10

Left cabinet

1

11

Relay unit

1

12

Band

2

1

2

3

4

5

6

7

8

9

10

11

12

MX-7580N  MX-RB12 (PAPER PASS UNIT)  11 – 2

3)

Install the paper guide (Packed items No.7), and fix the screw
(Packed items No.3).

4)

Engage the accuride rail (Packed items No.6) to cut-out por-
tion of main frame. 
Install the accuride rail while pressing so that engage the pro-
jection of the main unit frame with the hole in rear side of the
accuride rail. Fix the accuride rail with the screw (Packed items
No.1).

1)

Insert the rib of the left cabinet (Packed items No.10) into the
slit on the lower surface of the upper cabinet left. Fix the left
cabinet with the screw (Packed items No.1).

1)

Pull out the slide rails.

2)

Place the paper pass unit on the slide rails, and fix it with the
screw (Packed items No.1). 
Push the paper pass unit into the main unit to install.

3)

Insert the front cover (Packed items No.9) to the supporting
point, and fix it with a E-ring (Packed items No.4).