Sharp MX-6500N / MX-7500N (serv.man12) Service Manual ▷ View online
MX-7500 Transit, Installation (using) environment, Note - iii
> When repairing or replacing an electronic part, perform the
procedure on an anti-static mat.
G. Note for proper drum, developing, fusing and
transfer unit handling
When handling the OPC drum, developing and transfer units,
observe the following items.
Drum unit
> To prevent damage to the OPC drum, avoid working on the
Drum unit
> To prevent damage to the OPC drum, avoid working on the
drum unit in high intensity light areas.
> When the OPC drum is removed from the machine, cover it with
light blocking material. (When using paper, use about 10 sheets
of paper to cover it.)
> Be careful not to attach fingerprints, oil, grease, or other foreign
material on the OPC drum surface.
Transfer unit
> Be careful not to "leave” fingerprints, oil, grease, or other foreign
> Be careful not to "leave” fingerprints, oil, grease, or other foreign
material on the transfer roller, primary transfer belt and second-
ary transfer belt.
Developing unit
> Be careful not to "leave” fingerprints, oil, grease, or other foreign
> Be careful not to "leave” fingerprints, oil, grease, or other foreign
material on the developing unit.
Fusing unit
> Be careful not to "leave” fingerprints, oil, grease, or other foreign
> Be careful not to "leave” fingerprints, oil, grease, or other foreign
material on the fusing roller and the external heating belt.
> Do not leave the fusing roller in contact state for a long time.
If these items are neglected, a trouble may be generated in the
If these items are neglected, a trouble may be generated in the
copy and print image quality.
2. Transit and delivery
A. Implements, facility, and manpower
It is recommendable to use a forklift for bringing in the machine for
safety.
If no forklift is available, man-power of two persons is required. The
If no forklift is available, man-power of two persons is required. The
machine is considerably heavy, and requires safety precautions for
delivery and installation.
Transit of the machine must be made in packed condition to the
Transit of the machine must be made in packed condition to the
installing place.
Since the hard disk drive is built in the machine, use care not to
Since the hard disk drive is built in the machine, use care not to
exert vibrations or shocks to the machine when in transit.
B. Delivery
Remove the packing materials prior to installation in the office envi-
ronment.
No.
Content
Method
1
Implements, facility,
and man power
Use a forklift. (If no forklift is available,
manpower of two persons is required.)
2
Delivery
Transit must be made in packed condition.
MX-7500 Transit, Installation (using) environment, Note - iv
3. Power configuration
A. Indoor wiring (power outlet) and breaker information
NOTE:
> Prepare an indoor wiring (power outlet) which is connected to the AC plug of the machine and its option units.
> Prepare an indoor wiring (power outlet) which is connected to the AC plug of the machine and its option units.
The required number of power outlets varies according to the combination of the option units.
Prepare the necessary number of them.
Example: (North America) Finisher "2.9A", large-capacity multi-stage tray "8A" 12A>10.9A=2.9A+8A Connectable to the same circuit
(breaker).
> For the AC cord of an option unit, use another indoor wiring (another breaker) than that for the machine.
For North America only
> The machine power is of 200V, an indoor wiring work may be required.
> The machine power is of 200V, an indoor wiring work may be required.
For Europe only
> Both of AC code 1 and 2 can be connected together into 16A AC outlet in case, but if the power source is less than 16A in case, notice the
> Both of AC code 1 and 2 can be connected together into 16A AC outlet in case, but if the power source is less than 16A in case, notice the
following rules.
> For additional installation of breakers and 200V indoor wiring, use professionals to do the jobs.
MX-FN21/22
MX-ST10
Main Machine 1
MAin Machine 2
MX-LC13
AC cord type
Inlet
Inlet
Direct
---
Inlet
North
America
65cpm
machine
75cpm
machine
Power supply
rating
120V/2.9A
120V/1.3A
208-240V/12A
---
120V/8A
Power capacity
120V/15A
120V/20A
240V/20A
---
120V/15A
Form of the
plug
---
Form of the
power outlet
---
MX-FN21/22
MX-ST10
Main Machine 1
MAin Machine 2
MX-LC13
AC cord type
Inlet
Inlet
Inlet
Inlet
Inlet
Europe/
UK
65cpm
machine
75cpm
machine
Power supply
rating
230V/1.5A
120V/1.3A
230V/8A
230V/8A
230V/4A
Power capacity
230V/10A
230V/20A
230V/15A
230V/15A
230V/10A
Form of the
plug
Form of the
power outlet
MX-ST10
-8
2"
MX-ST10
MX-RB13
MX-FN22
-8
2"
-8
,#
-8
,#
%XCEPT
MX-7500N CONFIGURATION 1 – 1
MX-7500N
Service Manual
[1] CONFIGURATION
1. System diagram
-8
.
-8
.
$)')4!,
-8
,#
,!2'%
-8
-&
-5 ,4)
-8
42
%8)4
-8
,#8.
-8
-&
-5,4)
-8
2"
0!0%2
-8
2"
#52,
-8
#&
).3%24%2
-8
2"
0!0%2 0!33
5.)4
5.)4
-8
45
%8)4
-8
,#
MX-ST10
HIGH CAPACITY
STACKER
STACKER
MX-CA10
PAPER CART
MX-CA10
PAPER CART
MX-ST10
HIGH CAPACITY
STACKER
STACKER
MX-FD10
FOLDING UNIT
MX-RB13
RELAY UNIT
MX-PN13
A/B/C/D
PUNCH
MODULE
MODULE
MX-FN22
SADDLE STTICH
FINISHER
FINISHER
MX-FN21
FINISHER
MX-TM10
TRIMMING
MODULE
MODULE
MX-FD10
FOLDING UNIT
MX-RB13
RELAY UNIT
MX-PN13
A/B/C/D
PUNCH
MODULE
MODULE
MX-FN22
SADDLE STTICH
FINISHER
FINISHER
MX-FN21
FINISHER
MX-TM10
TRIMMING
MODULE
MODULE
MX-PN13
A/B/C/D
PUNCH
MODULE
MODULE
-8
08
).4%2&!#%
-8
+"
+%9"/!2$
-8
,4
,/.'
MX-RB17
*1
CONNECTION
MODULE
MODULE
*1: Option for 2nd MX-LC13
-8
058
803
-8
0&
"!2#/$%
!2
35
34!-0
-8
%"
%.(!.#%$
-8
3#8
34!0,%
-8
3#8
7%"
-8
!-
-8
&25
$!4!
&OR
&OR
-8
0%
&)%29
-8
%#
#!2$
-8
%"
-)22/2).'
-8
!-8
!00,)#!4)/.
).4%'2!4)/.
).4%'2!4)/.
-8
!-8
!00,)#!4)/.
#/--5.)#!4)/.
#/--5.)#!4)/.
-8
!-8
%84%2.!,
MX-SL10N
34!453
,!2'%
,!2'%
34!0,%
-8
'"8
'"#
315!2%
-8
&$
-8
"-
02/$5#4)/.
-8
#&
#/6%2
-8
4-
42)--%2
TopPage
1
: ‘13/Nov
1
1
MX-7500N CONFIGURATION 1 – 2
2. Option list
*1: Option for North America.
*2: Standard for North America and Europe.
*3: Standard for North America.
*2: Standard for North America and Europe.
*3: Standard for North America.
Model name
Name
MX-6500N
MX-7500N
MX-7500N
Remarks
Paper feed system
MX-LC12
LARGE CAPACITY TRAY
OPT
A4
MX-LCX3N
LARGE CAPACITY TRAY
OPT
A3
MX-MF10
MULTI BYPASS TRAY
OPT
For Main unit
MX-LT10
LONG PAPER FEEDING TRAY
OPT
MX-LC13
LARGE CAPACITY TRAYS
OPT
A3
MX-RB14
PAPER PASS UNIT
OPT
For large capacity trays
MX-RB17
CONNECTION MODULE
OPT
For large capacity trays
MX-MF11
MULTI BYPASS TRAY
OPT
For large capacity trays
Paper exit system
MX-TR14
EXIT TRAY UNIT
OPT
MX-TU14
EXIT TRAY CABINET
OPT(*3)
Cannot install the MX-TU14 and the MX-RB12
concurrently.
concurrently.
MX-RB12
PAPER PASS UNIT
OPT
Cannot install the MX-RB12 and the MX-TU14
concurrently.
concurrently.
MX-RB13
RELAY UNIT
OPT
For 100 sheets binding
MX-FN21
FINISHER
OPT
100 sheets binding
MX-FN22
SADDLE STITCH FINISHER
OPT
100 sheets binding/saddle 25 sheets binding
MX-PN13A
PUNCH MODULE
OPT
For 100 sheets binding
MX-PN13B
PUNCH MODULE
OPT
For 100 sheets binding
MX-PN13C
PUNCH MODULE
OPT
For 100 sheets binding
MX-PN13D
PUNCH MODULE
OPT
For 100 sheets binding
MX-TM10
TRIMMING MODULE
OPT
For 100 sheets binding saddle
MX-CF11
INSERTER
OPT
MX-ST10/
CA10
CA10
HIGH CAPACITY STACKER/PAPER CART
OPT
MX-RB15
CURL CORRECTION UNIT
OPT
MX-FD10
FOLDING UNIT
OPT
MX-GBX2
GBC PUNCH UNIT
OPT (Local)
MX-BM50
PRODUCTION BOOKLET MAKER
OPT (Local)
MX-CF50
COVER FEEDER
OPT (Local)
MX-TM50
TRIMMER
OPT (Local)
MX-FD50
SQUARE FOLD
OPT (Local)
MX-XB50
RAIL UNIT
OPT (Local)
Printer expansion
MX-PUX1
XPS EXPANSION KIT
OPT
EFI
MX-PE10
Fiery Server
OPT (Local)
MX-PX10
Interface Kit
OPT
Image send expansion
MX-PF10
BARCODE FONT KIT
OPT
AR-SU1
STAMP UNIT
OPT
MX-EB11
ENHANCED COMPRESSION KIT
OPT
Authentication/
Security
Security
MX-FR43U
DATA SECURITY KIT
OPT
Non-authentication version
MX-EC50
CARD SOLUTION KIT
OPT(*1)
Option set for North America.
MX-EB15
MIRRORING KIT
OPT
Application/
Solution
Solution
MX-AMX1
APPLICATION INTEGRATION MODULE
OPT
MX-AMX2
APPLICATION COMMUNICATION MODULE
OPT(*3)
Standard for North America.
MX-AMX3
EXTERNAL ACCOUNT MODULE
OPT(*2)
MX-AM10
WEB BROWSING EXPANSION KIT
OPT(*3)
Standard for North America.
Others
MX-KB16
KEYBOARD
OPT(*3)
Standard for North America.
MX-SL10 N
STATUS INDICATOR
OPT
MX-SCX1
STAPLE CARTRIDGE
OPT
For saddle staple (100 sheets saddle finisher)
MX-SCX2
STAPLE CARTRIDGE
OPT
For staple
(100 sheets saddle finisher / 100 sheets finisher)
(100 sheets saddle finisher / 100 sheets finisher)
AR-SV1
STAMP CARTRIDGE
OPT
TopPage
1
: ‘13/Nov
1
1
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man12) service manuals if exist.