Sharp MX-5500N / MX-6200N / MX-7000N (serv.man75) Service Manual ▷ View online
MX-7000N MX-5500N/6200N/7000N 1 – 13
H. Installation of individual color toner cartridges
1)
Shake the toner cartridge a few times.
2)
Open the toner cover.
3)
Insert the toner cartridge.
* Be sure to install the color cartridges to their proper posi-
tions. Avoid installation to a different color position.
* Do not forcibly insert the toner cartridge.
Keep holding the cartridge and completely insert it.
* When the machine is transported with the development unit
removed, be sure to remove the toner cartridge. (If not, tone
may be clogged.)
may be clogged.)
* Be sure to insert all of five toner cartridges (Y/M/C/BK1/
BK2).
[Color toner cartridge positions]
[Color toner cartridge positions]
4)
Insert the cartridge securely until it locks.
5)
Close the toner cover.
I. Installation of the paper exit tray and the paper
full detection actuator
1)
Install the paper exit tray (Package part No. 2) and the paper
exit full detection actuator (Package part No. 3) to the right
door.
exit full detection actuator (Package part No. 3) to the right
door.
J. Installation of the operation manual pocket
1)
Install the operation manual pocket (Package part No. 4) to the
back side of the machine.
back side of the machine.
Y
M
C
BK1
BK2
1
1
2
MX-7000N MX-5500N/6200N/7000N 1 – 14
K. Tray setup
(1) Setting of paper size and paper type
Change the tray setting in the "system setting" mode. Some items
require the administrator authority for display. The paper setting (to
A4/recycle) procedure for tray 3 is as follows.
However, if size of the tray 1 has been switched to B5, execute SIM
26-2, and set the paper size.
1)
require the administrator authority for display. The paper setting (to
A4/recycle) procedure for tray 3 is as follows.
However, if size of the tray 1 has been switched to B5, execute SIM
26-2, and set the paper size.
1)
Press the [SYSTEM SETTINGS] key.
2)
Touch the [Paper Tray Settings] key.
3)
Touch the [Tray Settings] key.
4)
Touch the [Change] key.
5)
Select "recycled" on the selection box of the "Type". Select
"A4" on the selection box of the "Size". Touch the [OK] key.
"A4" on the selection box of the "Size". Touch the [OK] key.
(2) Tray size setup
a. Inch series tray 1, tray 2 (LT to A4)
1)
1)
Pull out the tandem cassette.
2)
Push down the paper feed base plate gently, hold the hooks
and remove A4 size regulation plate.
and remove A4 size regulation plate.
LOGOUT
LINE
PRINT
IMAGE SEND
DATA
DATA
READY
SYSTEM
SETTINGS
HOME
JOB STATUS
System Settings
Admin Password
Back
Total Count
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
Address Control
Fax Data
Receive/Forward
USB-Device Check
Default Settings
List Print
(User)
System Settings
Paper Tray Settings
Back
Tray Settings
Paper Type Registration
Auto Tray Switching
Back
Change
Disable Punch
Disable Staple
Disable Duplex
Fixed Paper Side
Type
Plain
Auto-Inch
Tray Settings
Size
Tray 3
Doc. Filing
I-Fax
Fax
Print
Copy
Change
Disable Punch
Disable Staple
Disable Duplex
Fixed Paper Side
Type
Plain
Auto-Inch
Size
Tray 4
Doc. Filing
I-Fax
Fax
Print
Copy
2
3
OK
Cancel
System Settings
Tray Settings
Tray:
Type:
Size:
mm (148-432)
mm (100-297)
X
Y
Paper Property:
Tray 3
Recycle Paper
Auto-Inch
Fixed Paper Side
Disable Duplex
Disable Staple
1
2
1
1
3
3
3
3
2
2
MX-7000N MX-5500N/6200N/7000N 1 – 15
3)
Fit the A4 size regulation plate to A4 size, and attach it.
* Be careful to place and direction that install the sheet.
* Be careful to place and direction that install the sheet.
4)
Close the tandem cassette.
b. A4-B5 series tray 1 (A4 to B5)
* Except Europe, Australia, and New Zealand
1)
* Except Europe, Australia, and New Zealand
1)
Pull out the tandem cassette.
2)
Push down the paper feed base plate of the tray 1 gently, hold
the hooks and remove A4 size regulation plate. Remove the
sheet.
* Double the sheet that have been removed, and store it to the
the hooks and remove A4 size regulation plate. Remove the
sheet.
* Double the sheet that have been removed, and store it to the
tray 2.
3)
Push down the paper feed base plate of the tray 2 gently, hold
the hooks and remove A4 size regulation plate. Remove the
sheet.
the hooks and remove A4 size regulation plate. Remove the
sheet.
4)
Double the sheet that have been removed in step 2 and step 3,
and install the A4 size regulation plate.
* Double the sheet, and install it.
* Be careful to place and direction that install the sheet.
and install the A4 size regulation plate.
* Double the sheet, and install it.
* Be careful to place and direction that install the sheet.
1
3
3
2
2
1
2
3
2
3
MX-7000N MX-5500N/6200N/7000N 1 – 16
5)
Remove the rear end regulation plate F and R, and remove the
screw.
screw.
6)
Install the rear end regulation plate F and R, and fix with the
screw.
screw.
7)
Remove the screw, and remove the mylar sheet. Change the
installing direction and install with screws. (2 positions)
installing direction and install with screws. (2 positions)
8)
Open the waste toner bottle section cover.
9)
Remove the B5 size regulation plate.
10) Install the B5 size regulation plate to the tray 1.
11) Attach the A4 size regulation plate to inner side of the waste
toner bottle section cover.
1
1
2
2
3
3
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man75) service manuals if exist.