Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man35) Service Manual / Technical Bulletin ▷ View online
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
92
Image Quality
Correction of a failure which occurs with following steps:
1. Leave the MFP for long hours under “Ready” status.
2. Start a job and cancel the job right away.
3. Start printing another job immediately.
4. Fusing error occurs.
○
○
○
○
93
Options
Correction of the problem that the space key of USB keyboard cannot be recognized
○
○
○
○
94
Options
Correction of the occasional communication error (F1-51/F1-30) between FIN and
SDL
○
○
○
○
95
Options
Correction of the occasional communication error (F1-00) between FIN and PCU PWB
○
○
○
○
96
Options
Correction of the following issue:
Some sets of the saddle stitch jobs may not be stapled after replacing the staple
cartridge when using Recycle Paper or the thin large size paper (Paper Length:
298mm or more)
○
○
○
○
97
Options
Correction of the problem that the rear end of Pre-Punched paper may be mis-
detected.
○
○
○
○
98
Options
Allowing discharging papers onto job separator while Relay unit is installed
○
○
○
○
99
Options
(MX-LC17)
Firmware modification for common use in MX-LC17 and MX-LC17N.
(Version has been updated for purpose of common use so there is no
change in the machine settings.)
○
○
○
○
100
Options
(MX-LC17)
Correction of the problem that the actual remaining quantity is different from the
indication.
○
○
○
○
101
Image Send
Correction of the problem that the layout may be corrupted when copying the output
searchable PDF file and then pasting it to Word file.
NA
○
NA
○
102
Image Send
Correction of the following problem when sending the data with High-compression +
OCR:
*Data may not be sent due to NG90-****
or
*MFP may lock up while displaying “Processing” in the job status.
NA
○
NA
○
103
Image Send
Depending on the application of PC to open VCF file for Business Card Scan function,
the character may be garbled. As the countermeasure, Soft SW to switch the
character code of VCF file for Business Card Scan has been added.
SIM55-3 SW37 Data 5
0: UTF-8 (Default)
1: Character Code of each language
NA
○
NA
○
104
Image Send
Improvement of processing of OCR function for the following reason:
If the table is included in Office file scanned with OCR function, when printing that
Office file with Direct Print, it may not be printed or the table may be missing.
NA
○
NA
○
105
Image Send
Correction of the problem that MFP may lock up with OSA Scan
○
○
○
○
106
Image Send
Correction of the problem that NG90-0000 may occur when previewing the data with
Searchable PDF and performing the edit like Delete Page or Move Page, and then
send the data by Scan Send.
○
○
○
○
107
Image Send
Additional feature for Scan to E-mail: The image file is stored to HDD on main unit and
destination URL (download URL) is notified by e-mail.
○
○
○
○
108
Image Send
Addition of Image Crop for Special Modes in Scanner mode
○
○
○
○
○=applied
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
109
Image Send
Correction of failure to display address in the address column entered in Easy Fax
mode
○
○
○
○
110
Image Send
(This case applies to Phoenix only.)
Correction of scanning and outputting ruled lines on a table as image or text
This problem may occur in OCR Scan depends on the condition of ruled line on the
table.
NA
○
NA
○
111
Image Send
(This case applies to Phoenix only.)
Correction of failure to register “Compact PDF (Ultra Fine)” as file format in Initial
Status Settings for Scanner
NA
○
NA
○
112
Image Send
○
○
○
○
113
Image Send
Addition of Soft SW to change image quality of monochrome original
SIM55-3 SW No.41 Data 1
0: Priority on file size
1: Priority on image quality (Default)
* For MIF manufactured in May, 2017 and before, the default remains “0: Priority on file
size” even after firmware upgrade.
○
○
○
○
114
Image Send
Correction of displaying improper message which appears when domain of e-mail
address is limited
○
○
○
○
115
UI
Correction of the wording, line break position, and text form in Traditional Chinese.
○
○
○
○
116
UI
Change of the message when the cover does not close after replacing the waste toner
○
○
○
○
117
UI
Correction of problem with reprinting data in Document Filing
Changing paper size/type for Bypass tray to reprint the data from Document Filing
ends up with black screen.
○
○
○
○
118
UI
Correction of a failure which occurs with following steps:
1. Register OSA application while keyboard setting is set to French.
2. Select NetFront 3.5 as browser.
3. Use software numerical keypad and enter number.
4. Symbols are entered instead of number.
○
○
○
○
119
UI
Correction of displaying “8-up” for all N-up modes for Easy Copy in Spanish and
French
○
○
○
○
120
UI
Revision of description on cleaning of Main charger available in System Settings ->
Image Quality Adjustment -> Collective Adjustment.
○
○
○
○
121
UI
Modification of display of number of copy
When Language Setting is set to anything other than Japanese (e.g. English,
German), size of four-digit number of copy for Easy Copy is reduce to display all digits.
○
○
○
○
122
UI
Eliminating “Use Banner” in System Settings -> Printer Settings -> Print Setting from
PC/Mobile Terminal (Same setting in System Settings -> Network Settings -> Print Port
Settings -> LPD Settings will remain.)
○
○
○
○
123
OSA
Implementation of target setting for Find My Address for OSA external authentication in
Sharp OSA settings. The purpose is for users to use Find My Address during OSA
external authentication.
○
○
○
○
124
OSA
Correction of improper login:
When a designated user logs out of Device Accounting mode from OSA screen, the
designated user may login again by mistake.
○
○
○
○
125
OSA
Correction of problem with Caps Lock
Sometimes Caps Lock does not work while using external keyboard for in OSA
application.
○
○
○
○
○=applied
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
109
Image Send
Correction of failure to display address in the address column entered in Easy Fax
mode
○
○
○
○
110
Image Send
(This case applies to Phoenix only.)
Correction of scanning and outputting ruled lines on a table as image or text
This problem may occur in OCR Scan depends on the condition of ruled line on the
table.
NA
○
NA
○
111
Image Send
(This case applies to Phoenix only.)
Correction of failure to register “Compact PDF (Ultra Fine)” as file format in Initial
Status Settings for Scanner
NA
○
NA
○
112
Image Send
○
○
○
○
113
Image Send
Addition of Soft SW to change image quality of monochrome original
SIM55-3 SW No.41 Data 1
0: Priority on file size
1: Priority on image quality (Default)
* For MIF manufactured in May, 2017 and before, the default remains “0: Priority on file
size” even after firmware upgrade.
○
○
○
○
114
Image Send
Correction of displaying improper message which appears when domain of e-mail
address is limited
○
○
○
○
115
UI
Correction of the wording, line break position, and text form in Traditional Chinese.
○
○
○
○
116
UI
Change of the message when the cover does not close after replacing the waste toner
○
○
○
○
117
UI
Correction of problem with reprinting data in Document Filing
Changing paper size/type for Bypass tray to reprint the data from Document Filing
ends up with black screen.
○
○
○
○
118
UI
Correction of a failure which occurs with following steps:
1. Register OSA application while keyboard setting is set to French.
2. Select NetFront 3.5 as browser.
3. Use software numerical keypad and enter number.
4. Symbols are entered instead of number.
○
○
○
○
119
UI
Correction of displaying “8-up” for all N-up modes for Easy Copy in Spanish and
French
○
○
○
○
120
UI
Revision of description on cleaning of Main charger available in System Settings ->
Image Quality Adjustment -> Collective Adjustment.
○
○
○
○
121
UI
Modification of display of number of copy
When Language Setting is set to anything other than Japanese (e.g. English,
German), size of four-digit number of copy for Easy Copy is reduce to display all digits.
○
○
○
○
122
UI
Eliminating “Use Banner” in System Settings -> Printer Settings -> Print Setting from
PC/Mobile Terminal (Same setting in System Settings -> Network Settings -> Print Port
Settings -> LPD Settings will remain.)
○
○
○
○
123
OSA
Implementation of target setting for Find My Address for OSA external authentication in
Sharp OSA settings. The purpose is for users to use Find My Address during OSA
external authentication.
○
○
○
○
124
OSA
Correction of improper login:
When a designated user logs out of Device Accounting mode from OSA screen, the
designated user may login again by mistake.
○
○
○
○
125
OSA
Correction of problem with Caps Lock
Sometimes Caps Lock does not work while using external keyboard for in OSA
application.
○
○
○
○
○=applied
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
109
Image Send
Correction of failure to display address in the address column entered in Easy Fax
mode
○
○
○
○
110
Image Send
(This case applies to Phoenix only.)
Correction of scanning and outputting ruled lines on a table as image or text
This problem may occur in OCR Scan depends on the condition of ruled line on the
table.
NA
○
NA
○
111
Image Send
(This case applies to Phoenix only.)
Correction of failure to register “Compact PDF (Ultra Fine)” as file format in Initial
Status Settings for Scanner
NA
○
NA
○
112
Image Send
○
○
○
○
113
Image Send
Addition of Soft SW to change image quality of monochrome original
SIM55-3 SW No.41 Data 1
0: Priority on file size
1: Priority on image quality (Default)
* For MIF manufactured in May, 2017 and before, the default remains “0: Priority on file
size” even after firmware upgrade.
○
○
○
○
114
Image Send
Correction of displaying improper message which appears when domain of e-mail
address is limited
○
○
○
○
115
UI
Correction of the wording, line break position, and text form in Traditional Chinese.
○
○
○
○
116
UI
Change of the message when the cover does not close after replacing the waste toner
○
○
○
○
117
UI
Correction of problem with reprinting data in Document Filing
Changing paper size/type for Bypass tray to reprint the data from Document Filing
ends up with black screen.
○
○
○
○
118
UI
Correction of a failure which occurs with following steps:
1. Register OSA application while keyboard setting is set to French.
2. Select NetFront 3.5 as browser.
3. Use software numerical keypad and enter number.
4. Symbols are entered instead of number.
○
○
○
○
119
UI
Correction of displaying “8-up” for all N-up modes for Easy Copy in Spanish and
French
○
○
○
○
120
UI
Revision of description on cleaning of Main charger available in System Settings ->
Image Quality Adjustment -> Collective Adjustment.
○
○
○
○
121
UI
Modification of display of number of copy
When Language Setting is set to anything other than Japanese (e.g. English,
German), size of four-digit number of copy for Easy Copy is reduce to display all digits.
○
○
○
○
122
UI
Eliminating “Use Banner” in System Settings -> Printer Settings -> Print Setting from
PC/Mobile Terminal (Same setting in System Settings -> Network Settings -> Print Port
Settings -> LPD Settings will remain.)
○
○
○
○
123
OSA
Implementation of target setting for Find My Address for OSA external authentication in
Sharp OSA settings. The purpose is for users to use Find My Address during OSA
external authentication.
○
○
○
○
124
OSA
Correction of improper login:
When a designated user logs out of Device Accounting mode from OSA screen, the
designated user may login again by mistake.
○
○
○
○
125
OSA
Correction of problem with Caps Lock
Sometimes Caps Lock does not work while using external keyboard for in OSA
application.
○
○
○
○
○=applied