Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man35) Service Manual / Technical Bulletin ▷ View online
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
28
Main unit
control
Correction of failure to reboot MFP after firmware update
○
○
○
○
29
Main unit
control
Collecting all log data in one folder in thumb drive when SIM56-99 (batch log data
collection) is executed.
○
○
○
○
30
Main unit
control
Correction of machine lockup which may occur when authentication using an IC card is
executed while primarily requesting the authentication to an authentication server
○
○
○
○
31
Main unit
control
Correction of machine lockup which occurs while searching an address in the Address
Book
○
○
○
○
32
Main unit
control
Correction of failure with keyboard
The operating “CAPS” key on software keyboard turns on the Num Lock on external
keyboard being connected, illuminating the LED.
○
○
○
○
33
Main unit
control
Correction of recording unnecessary logs in Active Directory environment
○
○
○
○
34
Main unit
control
Correction of MPF reboot after execution of User Control -> User Count -> Save User
Count -> Print and Delete the Data
○
○
○
○
35
Main unit
control
Correction of fuser motor keeps running with low speed after opening Right cover
○
○
○
○
36
Main unit
control
Review of temperature correction during job (increased by 5-degree)
○
○
NA
NA
37
Main unit
control
Correction of H3-01 occasionally caused by printing a large number of envelopes
○
○
○
○
38
Main unit
control
Modification of software control to prevent H3 trouble due to overshoot.
○
○
○
○
39
Main unit
control
Fusing belt unit for MX-5050N/5070N/6050N/6070N series was changed from May
2017 production. For the purpose to avoid the low temperature offset, the fusing
temperature control function has been added to Soft SW and the default value has
been changed.
For machines before May 2017 production, the modification has been made so that
the set value does not automatically change even when updating the firmware to this
version.
If the set value is manually changed from 0 to 1, the high temperature offset may
occur.
In addition, if the setting of Soft SW is changed from 0 to 1 while the fusing belt unit
before May 2017 production is installed, the high temperature offset may occur.
*Changed fusing unit is supplied as the service parts. This will be announced on
Service Information later.
SIM55-1 SW No.22 Data 8
MX-5150FN/6150FN/5170FN/6170FN series
0: Not control the temperature
1: Control the temperature (Default)
MX-3050N/3550N/4050N/3060N/3560N/4060N/3070N/3570N/4070N series
0: Not control the temperature
1: Not control the temperature (Default)
*On MX-3050N/3060N/3070N series, both 0 and 1 are set to “Not control the
temperature” because Fusing belt unit has not been changed.
NA
NA
○
○
○=applied
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
40
Main unit
control
Correction of F1-00 error (Communication error between Finisher and PCU PWB)
This error may occur when a staple job is immediately followed by a non-staple job.
○
○
○
○
41
Main unit
control
Modification of failure to clinch staple properly
○
○
○
○
42
Main unit
control
Correction of H3-02 (Fusing section high temperature trouble (Upper sub)(TH_US1))
which may occur on the low speed model
(MX-3050N/3550N/4050N/3060N/3560N/4060N/3070N/3570N/4070N)
○
○
NA
NA
43
Main unit
control
Support of new options such as Finisher and Desk, etc.:
MX-FN27N/RB25N/TR19N
MX-DE25N/DE26N/DE27N/DE28N/DE29N/LC17N
○
○
○
○
44
Main unit
control
Correction of the problem that the machine may lock up with the
registration of Group Address when registering the address from WEB
○
○
○
○
45
Main unit
control
Correction of a problem with overseas models only
Downloading E-manual for Asia fails occasionally.
○
○
○
○
46
Printer
Correction of Job log error 414 and failure to perform rotate printing while printing a job
from AS400
○
○
○
○
47
Printer
Prevention of no communication
There are wireless access point environments which do not output printings as the
time passes without communication. To adjust to such environments, the packet data
are transmitted at regular time internals so that non-communication of the access point
can be prevented.
○
○
○
○
48
Printer
Support for Single Sign-on to send a job from printer driver
*You have to access to following site and download the driver for this model released
in May, 2017 and after to enable this feature.
<http://www.sharp-world.com/products/copier/downloads/index.html>
○
○
○
○
49
Printer
Change of MIB information according to the actual status
The purpose is preventing MFP to stop due to maintenance when it is allowed to
perform printing after it reaches the time for maintenance
○
○
○
○
50
Printer
Correction of occasional failure to print data from PC via USB connection
○
○
○
○
51
Printer
Correction of failure to execute the features related to cloud connection such as
“Google Drive” and “Print Release” icons etc.
They cannot be executed by clicking the icon available on Home screen displaying the
message “Can not select this function”.
○
○
○
○
52
Printer
Correction of failure to store Print Release job during device account mode.
○
○
○
○
53
Printer
Correction of failure to display print job in Print Release, keep retrieving a job list
○
○
○
○
54
Printer
Addition of Soft SW to print out the multiple files being selected in Print Release. They
will be printed in descending order according to the storage date.
SIM55-3 SW No.32 Data 6
0: Printing the jobs in ascending order (Default)
1: Printing the jobs in descending order
○
○
○
○
55
Printer
Correction of failure to perform direct print with a PDF file which has a long character
string as a title in the document property
○
○
○
○
56
Printer
Correction of failure to properly process the range for clipping mask designated in
Illustrator
○
○
○
○
57
Printer
Correction of failure to perform direct print with particular PDF file
○
○
○
○
58
Printer
Correction of problem related to Print Release:
The file being used at primary unit can be deleted by secondary unit
○
○
○
○
○=applied
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
59
Printer
Correction of failure to properly reflect color setting.
The problem occurs after reboot or recovery from power save mode after changing the
setting for color related items in System Settings -> Image Quality Adjustment -> Print
Image Quality -> Quick Image Quality Adjust
○
○
○
○
60
Printer
(This case applies to Phoenix only.)
Correction of printing takes longer to finish
The problem may occur taking several minutes to render spooled data after recovering
from power save mode triggered by motion sensor detection
NA
○
NA
○
61
Printer
Correction of PDPPD1_N JAM which may occur at the timing of switching from duplex
printing to simplex printing
○
○
○
○
62
Printer
Correction of F1-34 error (trouble with punch motor section) which may occur while
main unit is recovering from sleep mode by sending a Print job
○
○
○
○
63
Printer
Correction of the problem that the machine may lock up when
performing GCP (Google Could Print) print a few dozen times in a row
○
○
○
○
64
Printer
Correction of the problem that the machine may lock up when repeatedly
outputting the data released in print mode
○
○
○
○
65
Printer
Correction of machine lockup which occurs while performing particular job via PCL5
driver.
○
○
○
○
66
Fax
Correction of failure to complete data reception using Direct SMTP
○
○
○
○
67
Fax
Correction of failure to erase received data from the Receive data Preview screen
○
○
○
○
68
Fax
Correction of failure to display Narrow Down key
The key which narrows down job type in the Address Book is not displayed after
opening Received Data List and selecting “Forward” on Easy Scan screen.
○
○
○
○
69
Network
Implementation of support for Google Cloud Print Ver2
○
○
○
○
70
Network
Addition of print parameter “Tray Settings” and “Staple” for Google Could Print
○
○
○
○
71
Network
Correction of recording unnecessary logs in Active Directory environment
○
○
○
○
72
Network
Extension of the password length for SMTP authentication to 128 characters. The
purpose is to support Amazon mail services.
○
○
○
○
73
Network
Expansion of specification for connection to SharePoint Online
- Edition of parameter handled by SharePoint
- Referring custom library
- Connection to multiple SharePoint sites
- Connection to sub site
○
○
○
○
74
Network
Support for Exchange Connector Online
○
○
○
○
75
Network
Allowing scan and print to Box service
○
○
○
○
76
Network
Addition of NFC feature
(1) Support for NFC card reader
(2) Support for mobile applications
- Auto-activation of wireless LAN by NCF
- Capture print
- Support for QR code
○
○
○
○
77
Network
Additional features for direct print using Google Drive, Sharepoint Online, One Drive
and Box
- Display of the files disabled to print
- Narrowing down the files stored to Google Drive, Sharepoint Online, One Drive and
Box according to expansion
○
○
○
○
○=applied
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
78
Network
Correction of machine lockup which may occur when touches “Check Wireless LAN
Settings” in the environment where multiple access points with same SSID are set.
○
○
○
○
79
Network
Correction of operations gradually slowing down after polling for mail reception (POP3)
○
○
○
○
80
Network
Correction of failure to search global address book with designated search attribute
The problem occurs when Server Usage is registered in the order of User
Authentication and Address Book.
○
○
○
○
81
Network
Correction of image density become lighter
This problem occurs during external authentication for OSA because toner save mode
is enabled.
○
○
○
○
82
Copy
Change in Repeat Layout feature for Copy
- Changing parting line from 8 px to 2 px
- Addition of trim marks for marking line
- Addition of a feature to change layout method:
SIM55-3 SW No.42 Data 3
0: Positioning in a continuous manner (Default)
1: Positioning evenly
○
○
○
○
83
Copy
Correction of failure to print page number in position when “Pamphlet Style” and “Page
Number Print” are set together
○
○
○
○
84
Copy
Correction of machine lockup which may occur after finishing Preview for Easy Copy
and changing settings
○
○
○
○
85
Copy
Correction of machine lockup with a message “Please wait.” which may occur during
Copy job after clearing paper jam in Scanner mode
○
○
○
○
86
Copy
Correction of shifted position for Center Clearance in Copy job
○
○
○
○
87
Image Quality
Modification of occasional contamination with toner which appears on paper feed
direction side of output image
○
○
NA
NA
88
Image Quality
Correction of the problem that the periodic mis-registration of sub scanning may occur
when performing the registration adjustment.
○
○
○
○
89
Image Quality
Following default values have been changed as the countermeasure for the image with
the black stripe generated by the transfer cleaning failure:
(1) Soft SW (Sim55-2 SW12-4: 0->1) Enable the solid image output mode by 1st
transfer blade
(2) Soft SW (Sim55-2 SW27-4: 0->1) Enable the operation to output the solid image
when performing the transfer maintenance
Installing this firmware in the field will automatically change the settings to the above
settings.
NA
NA
○
○
90
Image Quality
Implementation of a Soft SW which interrupts a job to provide lubricant.
The purpose of implementing this Soft SW is to modify black streaks due to defective
Transfer cleaning.
0: No interruption during a job (Default)
1: The job is interrupted for application of lubricant,.
○
○
○
○
91
Image Quality
Correction of failure to execute auto registration adjustment after replacing toner
cartridge
The registration adjustment will not be executed unless it is executed manually or by
turning off and on the power.
○
○
○
○
○=applied
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man35) service manuals if exist.