Sharp MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man8) Service Manual ▷ View online
MX-5141N MX-DE21 (STAND 2000 SHEET PAPER DRAWER) 5 – 5
6)
Set the adjustment pattern on the document table.
Fit the adjustment pattern correctly with the document guide.
In this case, put 5 sheets of white paper on the printed adjust-
ment pattern.
In this case, put 5 sheets of white paper on the printed adjust-
ment pattern.
7)
Press [EXECUTE] key.
The following item is automatically adjustment.
? Print image lead edge image position adjustment
? Print image off-center adjustment
8)
Press [OK] key.
The adjustment result becomes valid.
Perform procedures 4) to 7) for each paper feed tray.
MX-5141N MX-DS18 (STAND) 6 – 1
MX-5141N
[6] MX-DS18 (STAND)
1. Unpacking
A. Removal of the stand unit
B. Removal of the fixing material and packing
parts
C. Packed item check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Main unit and machine stand installation
1)
Remove the connection plate covers of the both sides of the
main unit.
main unit.
2)
Put the main unit on the desk unit.
* Use man power of four persons or more to lift the main unit.
No.
Name
Quantity
1
Fixing screws (M4 x 10)
4
1
2
2
1
MX-5141N MX-DS18 (STAND) 6 – 2
* Place the main unit on the machine stand slowly by fitting
the external lines. Check to insure that the positioning pin
on the top of the machine stand is securely engaged in the
positioning groove of the main unit.
on the top of the machine stand is securely engaged in the
positioning groove of the main unit.
3)
Open the front door of the machine stand.
Unfasten the fixed screw and lift the connection plates on the
right and left sides of the front side of the machine stand, and
fix them with the fixing screws included in the package.
right and left sides of the front side of the machine stand, and
fix them with the fixing screws included in the package.
4)
Lift the connection plates, and fix them with the fixing screws
(Packed items).
(Packed items).
5)
Install the connection plate covers.
2
1
2
1
MX-5141FN MX-LC11 (LARGE CAPACITY TRAY) 6 – 1
MX-5141FN
Service Manual
[6] MX-LC11 (LARGE CAPACITY TRAY)
1. Unpacking
A. Removal of the large capacity tray unit
B. Removal of the fixing material and packing
parts
C. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Release the lock
1)
Remove the paper feed desk fixing screw.
NOTE: Before turning on the power, check to insure that the fixing
screw of the tray is removed. If the power is turned on with-
out removing the fixing screw, a trouble may be resulted.
out removing the fixing screw, a trouble may be resulted.
No.
Name
Quantity
1
Mounting plate upper
2
2
Connection unit
1
3
Fixing screw A (Hexagon with seat, S-tight, M4 x 35)
4
4
Fixing screw B (Hexagon with seat, S-tight, M4 x 12)
2
5
Fixing screw C (screw 4 x 8 cup)
1
1
3
4
2
5
Click on the first or last page to see other MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man8) service manuals if exist.