Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man16) User Manual / Operation Manual ▷ View online
OPERATION GUIDE - REPLACING THE WASTE TONER BOX
file:///G|/Documents/Products/MX4111_5111N/Operation%20Manual/MX511X_0170R1_ex_ope/contents/01-052a.htm[23/03/2012 12:17:00 PM]
MX-4110N / MX-4111N / MX-5110N / MX-5111N / MX-4112N / MX-5112N
REPLACING THE WASTE TONER BOX
Index
Contents
Operation
CLEANING AND REPLACEMENT
The waste toner box collects excess toner that is produced during printing. When the
waste toner box becomes full, "Replace used toner container." will appear.
Do not throw the waste toner box into a fire. Toner may fly and
cause burns.
Store the waste toner box out of the reach of small children.
OPERATION GUIDE - REPLACING THE WASTE TONER BOX
file:///G|/Documents/Products/MX4111_5111N/Operation%20Manual/MX511X_0170R1_ex_ope/contents/01-052b.htm[23/03/2012 12:17:01 PM]
MX-4110N / MX-4111N / MX-5110N / MX-5111N / MX-4112N / MX-5112N
REPLACING THE WASTE TONER BOX
CLEANING AND REPLACEMENT
<
9
steps in all >
Open the front cover.
Release the used waste
toner box.
Press the waste toner box release
button.
The waste toner box will fall forward
as shown at left. Wait until the box
comes to a stop.
Remove the waste toner
box.
Hold the waste toner box by both
hands and lift it up slowly.
Place the waste toner box
on a flat surface.
Keep the replacement cleaner
that has not been used.
Store it at the left of the new
waste toner box.
OPERATION GUIDE - REPLACING THE WASTE TONER BOX
file:///G|/Documents/Products/MX4111_5111N/Operation%20Manual/MX511X_0170R1_ex_ope/contents/01-052b.htm[23/03/2012 12:17:01 PM]
Place a sheet of paper such as
newspaper on the surface before
placing the waste toner box.
Remove the seals around
the holes.
Grasp the edge of each seal and pull
it out toward you.
Plug the holes.
Grasp the edge of each black seal
and insert it into a hole in the box to
plug the hole.
Install a new waste toner
box.
Do not point the holes down as used toner will spill out.
There are 4 seals. Remove all of the seals.
There are 4 seals. Plug all of the holes.
Keep waste toner boxes you have removed in a plastic bag (do not
discard them). Your service technician will collect them.
OPERATION GUIDE - REPLACING THE WASTE TONER BOX
file:///G|/Documents/Products/MX4111_5111N/Operation%20Manual/MX511X_0170R1_ex_ope/contents/01-052b.htm[23/03/2012 12:17:01 PM]
Index
Contents
Overview
Insert the box from above at a slant.
(In the direction opposite to the
direction you removed it in.)
Push the waste toner box
into the machine.
Push the box in until it clicks into
place.
Close the front cover.
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man16) service manuals if exist.