DOWNLOAD Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man38) Service Manual ↓ Size: 27.15 MB | Pages: 121 in PDF or view online for FREE

MX-4100N  MX-4100N/4101N/5000N/5001N  1 – 2

If dust enters the machine, it may cause dirty copy and a paper
jam, resulting in a shortened lifetime.

If the machine is installed under the rays of the sun, the exterior of
the machine may be discolored and abnormal copies may be pro-
duced.

Do not install the machine at a place where there are gases and
chemicals. Especially be careful to avoid installation near a diazo-
type copier, which produces ammonium gas.
Copy quality may be adversely affected and a trouble may be
caused.

Avoid installation near a machine which produces vibrations.
If vibrations are applied to the copier machine, copy images may be
deflected and a trouble may be caused.

It is recommendable to use a forklift for bringing in the machine for
safety.
If no forklift is available, man-power of four persons is required. The
machine is considerably heavy, and requires safety precautions for
delivery and installation.
Transit of the machine must be made in packed condition to the
installing place.
Since the hard disk drive is built in the machine, use care not to
exert vibrations or shocks to the machine when in transit.

Remove the packing materials prior to installation in the office envi-
ronment.

1)

Remove the PP band.

2)

Remove the internal packing pads with the machine.

1

Implements, facility, and 
manpower

Use a forklift. (If no forklift is 
available, manpower of four persons 
is required.)

2

Delivery

Transit must be made in packed 
condition.

MX-4100N  MX-4100N/4101N/5000N/5001N  1 – 3

1)

Check that all the parts are in the package.

<Note before installation>
* When connecting the main unit with the optional STAND/1 X 500

SHEET PAPER DRAWER (MX-DEX8) or STAND/2 X 500
SHEET PAPER DRAWER (MX-DEX9), first unpack and install
the MX-DEX8 or MX-DEX9; then unpack the main unit and
securely place the main unit on the MX-DEX8 or MX-DEX9
before installing the main unit.

1)

Pull out the tray, and remove the rotation plate fixing material
and the tray note label.

2)

Attach the removed fixing material to the position shown in the
figure for storage.

1

Toner cartridge unit

4

2

Developer

4

3

Waste toner box

1

4

Operation manual

1

5

Operation manual pocket

1

2

3

4

5

1

MX-4100N  MX-4100N/4101N/5000N/5001N  1 – 4

1)

Remove the optical unit fixing screw, and remove the note
label.

1)

Open the right door.

2)

Open the paper guide and pull out the fusing heat roller protec-
tor.

Be careful not to attach fingerprints or oily dirt on the DV roller sur-
face.
1)

Open the front cabinet.

2)

Check that the lock is released as shown in (A).
Loosen the blue screw, and open the drum positioning unit.
* When the lock is not released, use a screwdriver to turn the

screw (B) counterclockwise so that it is fit as (A).

3)

Open the DV lock lever, and release the fixing screw.
(1position for each color)

4)

Pinch the knob and remove the development unit.

5)

Remove the screws.

MX-4100N  MX-4100N/4101N/5000N/5001N  1 – 5

6)

Hold the sections A, and remove the DV cover in the arrow
direction (B).

7)

Supply developer (package part No. 2) in the developer unit.
* Shake the bag of developer with unopened state. After stir-

ring toner and developer in the bag, supply it to the develop-
ing unit.

* When replacing developer, use an extreme care not to drop

developer on the drive section (marked with ({)).

8)

Install the DV cover in the arrow direction A.
* When installing the DV cover, be sure to engage the pawl

with the boss.

9)

Secure the DV cover with the two screws.

10) Shake the developer unit horizontally a few times.

* When supplying developer, do not tilt the developing unit.

11) Install each developer unit.

* When installing the developer unit, be sure to check that the

DV lock lever is open.

A

A

B

A

A