Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) Service Manual ▷ View online
MX-4070N Dehumidifying heater 5 – 17
E. Desk heater kit installation
(1)
Tray 2 heater unit assembly
1)
Clean the label attaching surface of the desk heater mount plate
upper by the alcohol and attach the desk heater protection sheet.
upper by the alcohol and attach the desk heater protection sheet.
2)
Attach the desk heater to the heater mounting plate, and fix it with
a screw (M3 x 4 S tight bind).
a screw (M3 x 4 S tight bind).
3)
Attach the mini clamp on the desk heater mount plate upper and
pass the heater harness through it.
pass the heater harness through it.
(2)
Tray 3/4 heater unit assembly
1)
Attach the desk heater to the heater mounting plate, and fix it with
a screw (M3 x 4 S tight bind).
a screw (M3 x 4 S tight bind).
(3)
Connector cover, rear cabinet and right rear cabinet
removal
removal
1)
Remove the Connector cover.
2)
Remove the rear cabinet.
±1mm
±1mm
Ĭ
Ĭ
ĭ
ĭ
Ĭ
Ĭ
ĭ
ĭ
Ĭ
ĭ
Ĭ
Ĭ
Ĭ
ĭ
MX-4070N Dehumidifying heater 5 – 18
3)
Remove the right rear cabinet.
(4)
Paper feed tray removal
1)
Pull out the paper feed tray, and lift it to remove.
(5)
Tray 2 heater unit attachment
1)
Pass the harness of the heater unit for the tray 2 through the hole
in the frame. Attach the heater unit for the tray 2 to the frame, and
fix it with a screw (M3 x 6 S tight bind).
in the frame. Attach the heater unit for the tray 2 to the frame, and
fix it with a screw (M3 x 6 S tight bind).
2)
Attach the mini clamp on the rear frame.
3)
Pass the heater harness through the mini clamp.
4)
Clean the label attaching surface of the desk bottom by the alco-
hol and affix the high temperature warning label onto the frame.
hol and affix the high temperature warning label onto the frame.
Ĭ
Ĭ
ĭ
Ĭ
ĭ
0mm
0mm
0.5mm
0.5mm
MX-4070N Dehumidifying heater 5 – 19
(6)
Tray 3/4 heater unit attachment
1)
Attach the four mini clamps on the desk bottom.
2)
Attach the two mini clamps on the rear frame.
3)
Attach the heater unit for the tray 3/4 to the frame, and fix it with a
screw (M3 x 6 S tight bind).
screw (M3 x 6 S tight bind).
4)
Pass the harness of the heater unit for the tray 3/4 through the
hole in the frame, and pass it through the clamp.
hole in the frame, and pass it through the clamp.
(7)
Heater harness 2 attachment
1)
Remove the desk LCC connector fixing plate.
Ĭ
Ĭ
ĭ
ĭ
ĭ
ĭ
Left side
Right side
Rear
Ĭ
Ĭ
ĭ
ĭ
Į
MX-4070N Dehumidifying heater 5 – 20
2
2)
Attach the heater harness 2 to the desk LCC connector fixing
plate.
plate.
3)
Attach the desk LCC connector fixing plate.
4)
Attach the circle terminal of heater harness 2 with the two screws
(M4x8) and attach the heater frame 2 with the reusable band.
(M4x8) and attach the heater frame 2 with the reusable band.
(8)
Heater harness attachment
1)
Attach the reusable band of the heater harness and connect the
connector of the heater harness to the connector of the heater
harness 2.
connector of the heater harness to the connector of the heater
harness 2.
2)
Attach the reusable band of the heater harness and connect the
connector of the heater harness to the connector of the tray 2
heater. Then, attach the circle terminal of heater harness with the
two screws (M4x8)
connector of the heater harness to the connector of the tray 2
heater. Then, attach the circle terminal of heater harness with the
two screws (M4x8)
3)
Attach the reusable band of the heater harness and connect the
connector of the heater harness to the connector of the tray 3/4
heater, and pass the heater harness through the clamp.
connector of the heater harness to the connector of the tray 3/4
heater, and pass the heater harness through the clamp.
Į
Į
ĭ
ĭ
Ĭ
Ĭ
ĭ
Į
Ĭ
ĭ
Į
į
ĭ
Į
į
İ
ı
ı
Ĭ
2
: ‘16/Apr.
2
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) service manuals if exist.