Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man5) Handy Guide ▷ View online
Product Key Registration
21
Document Solutions After Sales Service
Procedure:
1.
Make a note of the Copier Serial Number upon which the option is to be installed.
The serial number can be obtained from the following menu:-
Custom Settings – Admin Authentication (Password) – Product Key – Serial Number
2.
Make a note of the Application number from the front of the option Operation Manual.
3.
Access the following URL, with the user name and password indicated
https://dse-pub.sharp.co.jp/key/
User Name:
keyuser
Password:
key000323
4.
Select your region (UK).
5.
Register the option(s) against the Sharp Copier Serial Number by completing the following Web form.
As shown, multiple options can now be registered at the same time:-
Note: When inputting the data, please ensure that the prefix letter of the Application number is entered in
UPPERCASE. Also, if the machine serial number ends in X or Y, that must also be entered in UPPERCASE.
UPPERCASE. Also, if the machine serial number ends in X or Y, that must also be entered in UPPERCASE.
6.
Click Send.
The Product Activation Key(s) will then be displayed. Also, an E-mail confirmation will
be sent to the E-Mail address of the dealer representative.
be sent to the E-Mail address of the dealer representative.
Enter the Product Key and enable the option(s) from within the following menu:-
Custom Settings – Admin Authentication (Password) – Product Key
Firmware Upgrade
22
Document Solutions After Sales Service
USB Device:
1. Insert the USB memory device containing the firmware file into the main USB Port.
2. Enter Simulation 49-01.
2. Enter Simulation 49-01.
Note: “If no USB device is detected, an error message will be displayed.
3. Using the LCD screen, browse and select the correct firmware file.
4. The current and the new firmware version to be updated will be shown within
the display:
5. Select the required firmware that requires updating (example shown: Config & ICU Boot).
Press Execute & Yes to commence the update.
Note: If all firmware (including peripherals) require updating, select ALL
Firmware Upgrade
23
Document Solutions After Sales Service
6. Firmware update progress (and remaining time) should now be displayed:-
7. Once the firmware update has completed successfully, click OK (MFP should reboot).
Firmware Upgrade
24
Document Solutions After Sales Service
Firmware update is complete.
Network (Web Page)
1.
Open a web browser and enter the following URL :-
http://ipaddress/service_login.html or
http://ipaddress/service_account.html
http://ipaddress/service_account.html
Example:
http://192.168.0.1/service_login.html
2.
To access the Service Webpage, enter the “Service” Username and Password.
Click Login:-
Default Username:
service
Password:
service
Note: If User Authentication is enabled, open the device webpage and login by selecting “Service”
from the drop down menu and entering the service password:-
3.
When the service webpage opens, click Update of Firmware.
4.
Click Browse to navigate to the location of the updated firmware file and select
Open.
5.
Press Execute to start the firmware update.
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man5) service manuals if exist.