Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man5) Handy Guide ▷ View online
Parts Compatibility
17
Document Solutions After Sales Service
Maintenance Schedule
Description
Colour Consumables (Cyan, Magenta & Yellow):
(only when the colour maintenance counter
has reached the specified life).
Replace Cyan, Magenta & Yellow Drum Units (MX-36GUSA x 3) or
• OPC Drum (MX-36GRSA x 3)
•
Drum Blade & MC Unit (MX-230MK x 3)
Replace C, M, Y Developer (MX-31GVSA).
Sim 24-05 Clear C, M, Y (Colour) Developer Counters.
Sim 24-04 Clear C, M, Y (Colour) Drum Counters.
Sim 25-02 Toner Concentration Auto Adjustment - Select C, M, Y.
Note: If ALL developer has been replaced at the same time, select CMYK.
Sim 44-27 Clear Half Tone Process Correction.
Sim 24-04 Clear Maintenance [Colour] Counter.
Sim 24-05 Clear C, M, Y (Colour) Developer Counters.
Sim 24-04 Clear C, M, Y (Colour) Drum Counters.
Sim 25-02 Toner Concentration Auto Adjustment - Select C, M, Y.
Note: If ALL developer has been replaced at the same time, select CMYK.
Sim 44-27 Clear Half Tone Process Correction.
Sim 24-04 Clear Maintenance [Colour] Counter.
Black Consumables:
(only when the Black maintenance counter has reached the specified life).
Replace Black Developer (MX-36GVBA).
Replace Black Drum Unit (MX-36GUSA) or
Replace Black Drum Unit (MX-36GUSA) or
• OPC Drum (MX-36GRSA).
• MC Unit & Drum Blade (MX-230MK).
• MC Unit & Drum Blade (MX-230MK).
Check/Replace Waste Toner Container (MX-230HB).
Replace Ozone Filter Kit (MX-C310FL).
Sim 24-05
Replace Ozone Filter Kit (MX-C310FL).
Sim 24-05
Clear K (Black) Developer Counter
Sim 24-04
Clear K (Black) Drum Counter.
Sim 25-02
Toner Concentration Adjustment – Select K only.
Sim 24-04
Clear Maintenance [ALL] Counter
100K Maintenance Schedule
In addition to Black Consumable schedule (and/or colour consumable schedule if indicated).
100K
100K
Paper Feed & Transport:
Replace Paper Dust Removal Unit (MX-230PD).
Check/Clean/Replace PF Rollers (check tray counter using Sim 22-09).
General:
Replace Primary Transfer Belt (MX-230B1)
Replace Primary transfer Blade (MX-230TL)
Replace PTC Kit (MX-230CU)
Clean all optics, CCD, and white reference plate.
Clean all RSPF sensors.
Sim 24-04
Replace Paper Dust Removal Unit (MX-230PD).
Check/Clean/Replace PF Rollers (check tray counter using Sim 22-09).
General:
Replace Primary Transfer Belt (MX-230B1)
Replace Primary transfer Blade (MX-230TL)
Replace PTC Kit (MX-230CU)
Clean all optics, CCD, and white reference plate.
Clean all RSPF sensors.
Sim 24-04
Clear TC1 Belt Counter
Clear TC1 Belt Range & Day Counters.
Clear PTC Counter
Clear TC1 Belt Range & Day Counters.
Clear PTC Counter
Fuser Section:
Replace Fuser Belt Kit (MX-360FB)
Check & Clean Upper and Lower Thermistors and Separator Pawls
Replace Fuser Cleaning Kit (MX-230CR)
Sim 24-04
Clear Fuser Web Counter.
Clear Fuser Web Send & Web Day Counters.
Clear Fuser Web Send & Web Day Counters.
Note: Auto DV Adjustment
Parts Compatibility
18
Document Solutions After Sales Service
Adjustments:
Sim 44-13
Sim 44-13
Colour Image Density & Front Registration Sensor Adjustment
Sim 44-02
Image Density & Registration Sensor Adjustment.
Sim 44-06
Process Control execution.
Sim 50-22
Drum Position & Registration Adjustment - select ALL.
Image Quality:
Sim 46-74
Automatic Colour Balance Adjustment (Copy & Printer).
Sim 46-01
Adjust Copy Exposure Density (Colour).
Sim 46-02
Adjust Copy Exposure Density (B/W).
200K Maintenance Schedule
200K
Fuser Section:
Replace Upper Fuser Roller Kit (MX-230LH).
Sim 24-04
Sim 24-04
Clear Fuser Unit Counter (U )
Clear Fuser Unit Day Counter (U)
Clear Fuser Unit Day Counter (U)
300K Maintenance Schedule
300K
Transfer Section:
Replace Secondary Transfer Belt Kit (MX-230B2)
Clean ID/Registration Sensors.
Sim 24-04
Replace Secondary Transfer Belt Kit (MX-230B2)
Clean ID/Registration Sensors.
Sim 24-04
Clear TC2 Belt Counter
Clear TC2 Belt Range & Day Counters.
Clear TC2 Belt Range & Day Counters.
Coin Vend Interface
19
Document Solutions After Sales Service
All MX series machines have a coin vend interface located on the PCU Main PWB. The vending device activates
various signals to indicate paper sizes and operation.
Because of additional functionality, the interface connector has been changed from 12 to 16 pins.
various signals to indicate paper sizes and operation.
Because of additional functionality, the interface connector has been changed from 12 to 16 pins.
Connector Manufacture:
JST
Connector Type
PND Series
Connector Part Code (Wire Side)
PNDP-16V-Z
Before connecting a third party auditor, the device should confirm to the following:-
1.
The auditor interface should be optically isolated from the copier.
2.
The device should be Power Supply Unit independent.
3.
The device power supply unit should be a plug top adapter, not internal.
4.
The plug top adapter should have a reinforced insulation barrier.
5.
The audit device MUST hold a CE Mark.
To enable coin vend function, test simulation 26 –03 should be set as required:-
Diagnostic
Setting
The specified quantity
is completed.
Remainder of money
is left
Insufficient money during copy job
The specified
quantity is
completed.
No money
remaining
Black/Colour
(No money
remaining)
Colour
(Remainder of money
left)
Condition 1
Condition 2
Condition 3
Condition 4
MODE 1
Operation 1
Operation 2
Operation 2
Operation 1
MODE 2
Operation 1
Operation 1
Operation 2
Operation 1
MODE 3
Operation 1
Operation 3
Operation 2
Operation 3
OPERATION 1 Wait for auto clear setting time
(Default 60sec – can be changed by the system setting)
OPERATION 2 Auto clear is not made.
OPERATION 3 Setting is immediately cleared.
Cont.
Coin Vend Interface
20
Document Solutions After Sales Service
Connector Signals:
Pin No.
PCU PWB (CN17)
1
+ 24v
Out
2
GND
Out
3
CV_B/W_COPY
In
4
CV_COUNT
Out
5
CV_START
Out
6
CV_CA
Out
7
CV_COLOUR_ COPY
In
8
CV_COLOUR1
Out
9
CV_STAPLE
Out
10
CV_COLOUR0
Out
11
CV_DUPLEX
Out
12
5v
Out
13
CV_SIZE0
Out
14
CV_SIZE1
Out
15
CV_SIZE2
Out
16
CV_SIZE3
Out
Colour Signal:
Colour Mode
Colour Mode 1
(CL-COLOR0)
Colour Mode 2
(CL-COLOR1)
B/W
0
0
Full Colour
1
1
Others
(Single/Two Colour)
0
1
Paper Size Signals:
SIZE3
SIZE2
SIZE1
SIZE0
PAPER SIZE
0
0
0
0
NIL
0
0
1
0
A4
0
0
0
1
A3
1
0
1
1
A3W
0
0
1
1
LT
0
1
0
0
B4
0
1
0
1
LG
0
1
1
0
WLT
0
1
1
1
INV
1
0
0
0
B5
1
0
1
0
A5
1
0
0
1
EXTRA
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man5) service manuals if exist.