Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man36) Service Manual ▷ View online
MX-3640N ADJUSTMENTS AND SETTINGS 5 – 54
10-D
(9)
Monochrome (Copy/Scan/FAX) mode color
document reproduction adjustment
(No need to adjust normally)
Use to adjust the reproducibility for the red image and the yellow
image when printing color document th at included the red/yellow
image in monochrome copy mode.
This adjustment is required in the following cases.
* When there is desire t o change reproducibility of yellow/red
This adjustment is required in the following cases.
* When there is desire t o change reproducibility of yellow/red
image in case of making a color copy of the color document in
monochrome copy mode.
* When there is request from the user.
1) Enter the SIM 46-37 mode.
1) Enter the SIM 46-37 mode.
2) Select the mode to be adjusted with the scroll key.
3) Enter the adjustment value with 10-key.
When the adjustment value of adjustment item A is increased,
copy density of red image is decreased. When the adjustment
value is decreased, copy density of red image is increased.
When the adjustment value of adjustment item B is increased,
When the adjustment value of adjustment item B is increased,
copy density of red image is increased. When the adjustment
value is decreased, copy density of red image is decreased.
4) Press [OK] key.
5) Make a copy in monochrom e text/printed photo copy mode
5) Make a copy in monochrom e text/printed photo copy mode
(manual), check the copy.
If a satisfactory result is not obtained, return to the SIM 46-37
If a satisfactory result is not obtained, return to the SIM 46-37
mode and change the adjustment value.
Repeat the above procedures until a satisfactory result is
Repeat the above procedures until a satisfactory result is
obtained.
10-D
(10)
Color copy mode dark area gradation (black
component quantity) adjustment
(No need to adjust normally)
Use to adjust the black ingredient amount in the color copy mode.
(except character and line image)
As a result of this adju stment, the gradation of the shad e part
As a result of this adju stment, the gradation of the shad e part
changes.
This adjustment is required in the following cases.
* When reproduction as solid of black image is required.
* To make the black background and the dark area darker
* When change of gradation of the shade part is required.
* When there is request from the user.
1) Enter the SIM 46-38 mode.
This adjustment is required in the following cases.
* When reproduction as solid of black image is required.
* To make the black background and the dark area darker
* When change of gradation of the shade part is required.
* When there is request from the user.
1) Enter the SIM 46-38 mode.
OK
DEFAULT
EXECUTE
NO
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
% :,0$*(&5($7($'-8670(17
$˖
˷̚˹
˖5*
$˖
˖%*
%˖
'()$8/7
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
% :,0$*(&5($7($'-8670(17
$˖
˷̚˹
˖5*
$˖
˖%*
%˖
'()$8/7
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
% :,0$*(&5($7($'-8670(17
$˖
˷̚˹
˖5*
$˖
˖%*
%˖
'()$8/7
$5(<28685("
<(6
12
(;(&87(
YES
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
% :,0$*(&5($7($'-8670(17
$˖
˷̚˹
˖5*
$˖
˖%*
%˖
'()$8/7
$5(<28685("
<(6
12
(;(&87(
10-key
Display/Item
(Copy mode)
Content
Adjustment
range
Default
A R/G
Gray making setting (R/G)
0 - 99
21
B B/G
Gray making setting (B/G)
0 - 99
0
(-)LUT2
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
%/$&.,0$*(&5($7($'-8670(17
˄˅/87
120$/
˄˅/87
7(;7ǂ357
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
7(;7
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
35,17('ǂ3+272
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
3+272
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
7(;7ǂ3+272
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
0$3
˖
˄˅/87
˄˅/87
$872
0$18$/
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
%/$&.,0$*(&5($7($'-8670(17
˄˅/87
120$/
˄˅/87
7(;7ǂ357
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
7(;7
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
35,17('ǂ3+272
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
3+272
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
7(;7ǂ3+272
˖
˄˅/87
˄˅/87
˄˅/87
120$/
˄˅/87
0$3
˖
˄˅/87
˄˅/87
$872
0$18$/
MX-3640N ADJUSTMENTS AND SETTINGS 5 – 55
2) Select the AUTO MODE or the MANUAL MODE with the mode
key.
3) Select the mode to be adjusted with the scroll key.
4) Press the black ingredient amount select button.
When reproduction as solid of black image is required:
Selects + button
When there is desire to darken copy of black image:
When there is desire to darken copy of black image:
Selects + button
When a dark color image is reproduced in the black:
When a dark color image is reproduced in the black:
Selects - button
5) Make a copy in color copy mode and check the copy.
If a satisfactory result is not obtained, return to the SIM 46-38 mode
If a satisfactory result is not obtained, return to the SIM 46-38 mode
and change the adjustment value.
Repeat the above procedures until a satisfactory result is obtained.
Repeat the above procedures until a satisfactory result is obtained.
Display/Item (Copy mode) Select button
Content
Default
MANUAL
TEXT PRT
(-) LUT2
Text print
(Manual)
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
TEXT
(-) LUT2
Text (Manual) NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
PRINTED
PHOTO
(-) LUT2
Printed photo
(Manual)
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
PHOTO
(-) LUT2
Photograph
(Manual)
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
TEXT PHOTO
(-) LUT2
Text/
Photograph
(Manual)
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
MAP
(-) LUT2
Map (Manual) (+) LUT1
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
CP ORG/
TEXT PRT
(-) LUT2
Copy
document/
Text printed
(Manual)
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
COPY ORG/
TEXT
(-) LUT2
Copy
document/
Text (Manual)
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
COPY ORG/
PHOTO
(-) LUT2
Copy
document/
Printed photo
(Manual)
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
LIGHT
ORIGINAL
(-) LUT2
Light
document
(Manual)
(+) LUT1
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
AUTO
AUTO0
(-) LUT2
Auto mode
judgment 0
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
AUTO1
(-) LUT2
Auto mode
judgment 1
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
AUTO2
(-) LUT2
Auto mode
judgment 2
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
AUTO3
(-) LUT2
Auto mode
judgment 3
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
AUTO4
(-) LUT2
Auto mode
judgment 4
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
AUTO5
(-) LUT2
Auto mode
judgment 5
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
AUTO6
(-) LUT2
Auto mode
judgment 6
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
(+) LUT2
Display/Item (Copy mode) Select button
Content
Default
MX-3640N ADJUSTMENTS AND SETTINGS 5 – 56
10-D
(11)
Color (Copy/Scan) mode sharpness
adjustment (No need to adjust normally)
Use for sharpness adju stment of the high density image in color
copy mode.
This adjustment changes smoothness (asperity) in the image
This adjustment changes smoothness (asperity) in the image
shade part.
This adjustment is required in the following cases.
* When changing the shar pness of copy image in copy mode.
* When changing the shar pness of copy image in copy mode.
(obtain crispy image) (decreases moire)
* When there is desire to improving smoothness in the image
shade part (for decrease of asperity)
* To make the black background and the dark area darker.
* To reproduce the gradation change in the dark area.
* When there is request from the user.
* To reproduce the gradation change in the dark area.
* When there is request from the user.
1) Enter the SIM 46-60 mode.
2) Select the mode to be adjusted with the scroll key.
3) Input numeric value corr esponding to sharp ness level (filter
process mode).
• Adjustment item A:
• Adjustment item A:
When selecting AUTO, filter is selected according to dot pat-
tern state automatically and adjusts sharpness.
OK
10-key
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
&2/25$87202'(ǂ),/7(5ǂ$'-8670(17
$˖
˷̚˹
˖6&5((1),/7(5/(9(/$872
$˖
˖$87202'(),/7(5/(9(/&(17(5
%˖
˖&2/25&23<&0<21
&˖
˖&2/25&23<.21
'˖
˖&2/25&23<&0<21
)˖
˖6,1*/(&2/25&0<21
(˖
˖&2/25&23<.21
*˖
˖%:&23<21
+˖
˖&2/25386+5*%21
,˖
˖%:386+21
-˖
2.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
&2/25$87202'(ǂ),/7(5ǂ$'-8670(17
$˖
˷̚˹
˖6&5((1),/7(5/(9(//
$˖
˖$87202'(),/7(5/(9(/&(17(5
%˖
˖&2/25&23<&0<21
&˖
˖&2/25&23<.21
'˖
˖&2/25&23<&0<21
)˖
˖6,1*/(&2/25&0<21
(˖
˖&2/25&23<.21
*˖
˖%:&23<21
+˖
˖&2/25386+5*%21
,˖
˖%:386+21
-˖
2.
Display/Item
Content
Setting range
Default
NOTE
A SCREEN FILTER
LEVEL
H
Sharpness (filter) adjustment of dot pattern
image in auto copy mode
Strong emphasis
1
3 (Auto)
Apply to auto copy mode
only
L
Soft emphasis
2
AUTO
Auto
3
B AUTOMODE
FILTER LEVEL
SOFT
Sharpness (filter) adjustment for the auto
copy mode
SOFT
1
2
(CENTER)
CENTER
CENTER
2
HIGH
HIGH
3
C COLOR COPY:
CMY
OFF
Soft filter applying setting to C, M, Y image
in color copy mode
OFF
0
1 (ON)
Available for the high
density image except
text and line image
ON
ON
1
D COLOR COPY:K
OFF
Soft filter applying setting to K image in
color copy mode
OFF
0
1 (ON)
ON
ON
1
E SINGLE COLOD:
CMY
OFF
Soft filter applying setting to C, M, Y image
in single color copy mode
OFF
0
1 (ON)
When setting ON,
smoothness in the image
shade part improves by
applying soft filter.
(asperity decreases)
ON
ON
1
F
2 COLOR COPY:
CMY
OFF
Soft filter applying setting to C, M, Y image
in 2-color copy mode
OFF
0
1 (ON)
ON
ON
1
G 2 COLOR COPY:
K
OFF
Soft filter applying setting to K image in
color copy mode
OFF
0
1 (ON)
ON
ON
1
H B/W COPY
OFF
Soft filter applying setting in monochrome
copy mode
OFF
0
1 (ON)
ON
ON
1
I
COLOR PUSH:
RGB
OFF
Soft filter applying setting to image in push
scan color mode
OFF
0
1 (ON)
ON
ON
1
J
B/W PUSH
OFF
Soft filter applying setting to image in push
scan monochrome mode
OFF
0
1(ON)
ON
ON
1
MX-3640N ADJUSTMENTS AND SETTINGS 5 – 57
Input small numeric value to obtain crispy image. Input large
numeric value to decrease moire.
• Adjustment item B:
Select HIGH to obtain clear images. Select SOFT to reduce
moire.
• Adjustment item C - J:
When setting ON, smoothness in the image shade part
improves by applying soft filter. (asperity decreases)
4) Press [OK] key.
5) Make a copy and check the copy image.
If a satisfactory result is not obtained, return to the SIM 46-60 mode
5) Make a copy and check the copy image.
If a satisfactory result is not obtained, return to the SIM 46-60 mode
and change the adjustment value.
Repeat the above procedures until a satisfactory result is obtained.
Repeat the above procedures until a satisfactory result is obtained.
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man36) service manuals if exist.