Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man7) Service Manual ▷ View online
MX-3100N CONSUMABLE PARTS 3 – 7
C. Toner cartridge
The label indicating the management number is attached to the
side of the toner cartridge.
side of the toner cartridge.
Part name
Toner color
Production
place
Serial No. in production day
Production
year/month/day
Version
Destination
Incompatibility
Example: 1st of production onJune 1, 2008
MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 1
MX-3100N
Service Manual
[5] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. Identification of each section and functions
A. External view
* Peripheral device.
The peripheral devices are basically options. There are some destinations that peripheral device is provided as a standard unit.
The peripheral devices are basically options. There are some destinations that peripheral device is provided as a standard unit.
(1)
(2) (3)
(6)
(5)
(4)
(7)
(8)
(9)
(11)
(10)
(14)
(12) (13)
(15)
When a finisher / saddle
stitch finisher is not installed
stitch finisher is not installed
When a keyboard
is installed
is installed
When a finisher is installed
No.
Name
function/Operation
NOTE
1
Automatic document feeder
This automatically feeds and scans multiple originals. Both sides of 2-sided
originals can be automatically scanned.
originals can be automatically scanned.
2
Front cover
Open this cover to switch the main power switch to "On" or "Off" or to replace a
toner cartridge.
toner cartridge.
3
Paper pass unit*
This transfers output to the saddle stitch finisher.
4
Operation panel
This is used to select functions and enter the number of copies.
5
USB connector (A type)
Supports USB 2.0 (Hi-Speed). This is used to connect a USB device such as
USB memory to the machine. For the USB cable, use a shielded cable.
USB memory to the machine. For the USB cable, use a shielded cable.
6
Exit tray unit (right tray)*
When installed, output can be delivered to this tray.
7
Output tray (center tray)
Output is delivered to this tray.
8
Keyboard*
This is a keyboard that is incorporated into the machine. When not used, it can
be stored under the operation panel.
be stored under the operation panel.
9
Saddle stitch finisher*
This can be used to staple output. The saddle stitch function for folding and
stapling output and the fold function for folding output in half are also available. A
punch module can also be installed to punch holes in output.
stapling output and the fold function for folding output in half are also available. A
punch module can also be installed to punch holes in output.
10
Tray 1
Up to 500 sheets of paper (80 g/m
2
(21 lbs.)) can be loaded in each tray.
11
Tray 2
12
Tray 3 (when a stand/1 x 500 sheet
paper drawer or a stand/2 x 500 sheet
paper drawer is installed)*
paper drawer or a stand/2 x 500 sheet
paper drawer is installed)*
This holds paper. Up to 500 sheets of paper (80 g/m
2
(21 lbs.)) can be loaded.
13
Tray 4 (when a stand/2 x 500 sheet
paper drawer is installed)*
paper drawer is installed)*
This holds paper. Up to 500 sheets of paper (80 g/m
2
(21 lbs.)) can be loaded.
14
Tray 5 (when a large capacity tray is
installed)*
installed)*
Up to 3500 sheets of paper (80 g/m
2
(21 lbs.)) can be loaded.
When a stand/1 x 500 sheet paper drawer is installed, this is tray 4.
15
Finisher*
This can be used to staple output. A punch module can also be installed to
punch holes in output.
punch holes in output.
MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 2
B. Internal operation parts
No.
Name
Function/Operation
NOTE
1
Toner cartridges
These contain toner for printing. When the toner runs out in a cartridge, the
cartridge of the color that ran out must be replaced.
cartridge of the color that ran out must be replaced.
2
Fusing unit
Heat is applied here to fuse the transferred image onto the paper.
Caution:
The fusing unit is hot. Take
care not to burn yourself
when removing a paper
misfeed.
The fusing unit is hot. Take
care not to burn yourself
when removing a paper
misfeed.
3
Transfer belt
During full color printing, the toner images of each of the four colors on each of
the photoconductive drums are combined together on the transfer belt. During
black and white printing, only the black toner image is transferred onto the
transfer belt.
the photoconductive drums are combined together on the transfer belt. During
black and white printing, only the black toner image is transferred onto the
transfer belt.
Do not touch or damage the
transfer belt. This may cause
a defective image.
transfer belt. This may cause
a defective image.
4
Right side cover
Open this cover to remove a paper misfeed.
5
Paper reversing section cover
This is used when 2-sided printing is performed. Open this cover to remove a
paper misfeed.
paper misfeed.
6
Bypass tray
Use this tray to feed paper manually. When loading paper larger than 8-1/2" x
11"R or A4R, be sure to pull out the bypass tray extension.
11"R or A4R, be sure to pull out the bypass tray extension.
7
Main power switch
This is used to power on the machine. When using the fax or Internet fax
functions, keep this switch in the "on" position.
functions, keep this switch in the "on" position.
8
Waste toner box
This collects excess toner that remains after printing.
9
Waste toner box release button
Press this button when you need to release the waste toner box lock to replace
the waste toner box or clean the laser unit.
the waste toner box or clean the laser unit.
10
Handle
Pull this out and grasp it when moving the machine.
11
Right cover of stand/1 x 500 sheet
paper drawer Right cover of stand/2 x
500 sheet paper drawer (when a
stand/1 x 500 sheet paper drawer or a
stand/2 x 500 sheet paper drawer is
installed)
paper drawer Right cover of stand/2 x
500 sheet paper drawer (when a
stand/1 x 500 sheet paper drawer or a
stand/2 x 500 sheet paper drawer is
installed)
Open this to remove a paper misfeed in tray 3 or tray 4.
12
Paper tray right side cover
Open this to remove a paper misfeed in tray 1 or tray 2.
13
Right side cover release lever
To remove a paper misfeed, pull and hold this lever up to open the right side
cover.
cover.
(1)
(2)
(3)
(6)
(5)
(4)
(9)
(8)
(12) (13)
(10) (11)
(7)
MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 3
C. AUTOMATIC DOCUMENT FEEDER AND DOCUMENT GLASS
No.
Name
function/Operation
NOTE
1
Paper feed roller
This roller rotates to automatically feed the original.
2
Document feeding area cover
Open this cover to remove an original misfeed or clean the paper feed roller.
3
Original guides
These help ensure that the original is scanned correctly. Adjust the guides to the
width of the original.
width of the original.
4
Document feeder tray
Place originals in this tray. 1-sided originals must be placed face up.
5
Original exit tray
Originals are delivered to this tray after scanning.
6
Scanning area
Originals placed in the document feeder tray are scanned here.
7
Original size detector
This detects the size of an original placed on the document glass.
8
Reversing tray
During scanning of a 2-sided original, the original is temporarily output to this
tray in order to be turned over for scanning of the reverse side.
tray in order to be turned over for scanning of the reverse side.
9
Document glass
Use this to scan a book or other thick original that cannot be fed through the
automatic document feeder.
automatic document feeder.
(2)
(8)
(9)
(3)
(4)
(5)
(6)
(7)
(1)
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man7) service manuals if exist.