Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man108) Service Manual / Technical Bulletin ▷ View online
15) Return the first and second cassettes to the original positions (reversal of takeout in procedure (5))
16) Turn on the heater switch ( ), measure the resistance values of the L side and ground side and N side and
16) Turn on the heater switch ( ), measure the resistance values of the L side and ground side and N side and
ground side of the AC input plug, and check that no short-circuit occurred.
* After the check, if you do not use the heater, turn off the heater switch.
* After the check, if you do not use the heater, turn off the heater switch.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-620
Mounting the LSU Heater
1. Remove trays 1 and 2.
2. Remove the left exterior posterior and the left exterior.
3. Remove the LSU left plate.
1. Remove trays 1 and 2.
2. Remove the left exterior posterior and the left exterior.
3. Remove the LSU left plate.
4. Remove one screw (M4x8S tight).
5. Insert the LSU heater kit.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-620
6. Secure with screw (M4x8S tight) removed in Step 4.
7. Remove one screw (M3x8P tight) and remove the handle cover from the handle.
8. Paste the handle sheet to the U groove portion of the handle sheet holder.
* Degrease the paste surface (U groove portion) with alcohol.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-620
9. Insert the handle sheet holder into the inside of the handle.
* Degrease the handle surface with alcohol because the handle sheet is pasted to the handle surface.
10. Mount the handle cover to the handle.
11. Paste the handle sheet to the handle.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-620
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man108) service manuals if exist.