DOWNLOAD Sharp MX-2310U / MX-3111U (serv.man17) Service Manual ↓ Size: 26.68 MB | Pages: 127 in PDF or view online for FREE

MX-3610N  IC card reader  6 – 3

4)

Attach the IC card reader holder to the operation panel of the
machine.

5)

Bind up the cables of the card reader.

The length and the winging method differ depending on the
kind of the IC card reader.

Holder type B
Y591-EHID-201 v01
Pass the binding band through the hole before winding.

Hang the cable on the four hooks and wind so that there is no
slack.

If there is some slack, the cable may be pinched.

Fix with a screw.

MX-3610N  IC card reader  6 – 4

Fold and put the rest of the cable under the bundle.

Fix the cable at the USB connector socket section in the USB
mini harness side.

Fix so that the USB connection position is at the center of the
card reader holder.

Holder type C
RDR-6081AKU, RDR-7582AKU
Hang the cable on the two hooks and wind it so that there is no
slack.

If there is some slack, the cable may be pinched.

Fold and put the rest of the cable under the bundle.

Bind the root section of the USB connector in the card reader
side and the USB connector socket section in the USB mini
harness side with the binding bands.

Fix so that the USB connection position is at the center of the
card reader holder.

Holder type C
TWN3
Hang the cable on the two hooks and wind it so that there is no
slack.

If there is some slack, the cable may be pinched.

Fold and put the rest of the cable under the bundle.

Bind the root section of the USB connector in the card reader
side and the USB connector socket section in the USB mini
harness side with the binding bands.

Fix so that the USB connection position is at the center of the
card reader holder.

MX-3610N  IC card reader  6 – 5

1)

Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.

IC card reader device registration
1)

Device registration
a)

Enter the card reader setting menu as shown below.
System Settings

→User Control→Card Reader Device 

Registration

b)

Press [Read] button.

c)

Disconnect the connector which links the machine and the
IC card reader, and then insert it back.

d)

Press [OK] button.

e)

Check to confirm that values are displayed on "Product
ID" and "Vender ID".

f)

Press [SUBMIT] button, and check to confirm that the suc-
cess dialog message is displayed.

MX-3610N  IC card reader  6 – 6

2)

Setting
a)

Enter the card reader setting menu as shown below.
System Settings

→User Management→Card Type/Card 

Reader Settings

b)

Check-mark "Use IC Card for Authentication".

c)

Press [Submit] button.

There are two check methods of IC card recognition. Use either
one to check that the IC card reader is recognized.
Check method 1
1)

Enter the card reader setting menu as shown below.
Home

→Settings→System Settings→USB-Device Check

2)

Check to confirm that "Card Reader/Writer" is displayed.

Check method 2
Check to confirm that the icon of the card reader is displayed on the
system area of the home screen. 
(If there is no check-mark on "Use IC Card for Authentication," the
icon is not displayed.)

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.

1)

Attach the operation panel cover.

2)

Attach the front cabinet upper.

The following procedures are executed only when a request is
made by a user for customizing the data format of IC card reading.

1)

Make the setting file for HID card reading. 
For the making procedures, refer to the Manual of Setting File
for HID Card Reading.

2)

Copy the setting file to a USB memory.