Sharp MX-1800N (serv.man45) User Manual / Operation Manual ▷ View online
16
4
Touch the [OK] key.
5
Make sure that the automatically
selected paper size is the same size as
the original.
selected paper size is the same size as
the original.
The selected tray is highlighted. You can also copy onto paper
that is a different size than the original.
that is a different size than the original.
• The 2-sided copy setting appears at the top of the paper size display (A).
• Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
• To change the paper size selection, touch the [Job Detail Settings] key and then the [Paper Select] key, or touch the
paper size display (A).
The following screen appears when the [Paper Select] key or the paper size display (A) is touched. Touch the key of
the tray that has the desired paper size and then touch the [OK] key.
The following screen appears when the [Paper Select] key or the paper size display (A) is touched. Touch the key of
the tray that has the desired paper size and then touch the [OK] key.
6
Check the colour mode.
The currently selected colour mode appears.
To change the colour mode, touch the [Colour Mode] key,
touch the [Full Colour] key, [Auto] key, [Single Colour] key or [2
Colour] key, and touch the [OK] key.
To change the colour mode, touch the [Colour Mode] key,
touch the [Full Colour] key, [Auto] key, [Single Colour] key or [2
Colour] key, and touch the [OK] key.
☞
COPY COLOUR MODES
(page 21)
Full Colour: The original is copied in full colour.
Auto: Colour or black and white is automatically selected when
Auto: Colour or black and white is automatically selected when
the original is scanned.
Single Colour: The original is copied in the selected colour only.
2 Colour: Only the red areas of the original are changed to the
2 Colour: Only the red areas of the original are changed to the
selected colour; colours other than red are scanned
in black.
in black.
2-Sided Copy
OK
Binding
Change
Ready to scan for copy.
2-Sided Copy
Original A4
0
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
2.
3.
4.
1.
A4R
B4
A3
A3
A4
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
A4
Plain
(A)
Paper Select
OK
Plain
Plain
Plain
Plain
Plain
A4
A4
A4R
B4
A3
Ready to scan for copy.
2-Sided Copy
Original A4
0
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
2.
3.
4.
1.
A4R
B4
A3
A3
A4
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
A4
Plain
17
Using the [Binding Change] key
7
Set the number of copies (sets) with the
numeric keys.
numeric keys.
• Up to 999 can be set.
• If you are only making a single copy, the copy can be made with the copy number display showing "0".
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [CLEAR] key (
) and then enter the correct number.
8
Press the [COLOUR START] key (
)
or the [BLACK & WHITE START] key
(
(
).
To cancel scanning of the original and copying...
Press the [STOP] key (
Press the [STOP] key (
).
Originals
Binding Change is used
Binding Change is not used
The reverse side
is upside down.
is upside down.
The reverse side
is not upside
down.
is not upside
down.
Select this when
the pages will be
bound into a
tablet.
the pages will be
bound into a
tablet.
Select this when
the pages will be
bound into a
booklet.
the pages will be
bound into a
booklet.
7
2-Sided Copy
or
A
1
2
A
A
A
3
A
18
AUTOMATIC 2-SIDED COPYING USING THE
DOCUMENT GLASS
DOCUMENT GLASS
The following 2-sided copying can be performed automatically. The paper is turned over automatically, allowing easy
2-sided copying.
2-sided copying.
Automatic 2-sided copying of 1-sided
originals
originals
1
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
place the original face down on the
document glass, and then gently close
the automatic document feeder.
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
underneath may damage the original size detector plate and prevent correct detection of the document size.
2
Touch the [2-Sided Copy] key.
Originals
Copies
Original size
detector
detector
A4 or 8-1/2" x 11"
B4 or
8-1/2" x 14"
8-1/2" x 14"
A3 or 11" x 17"
A4R or 8-1/2" x 11"R
Document glass scale
mark
Document glass scale
mark
A5 or
5-1/2" x 8-1/2"
5-1/2" x 8-1/2"
B5
B5R
Ready to scan for copy.
2-Sided Copy
0
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
Auto
Exposure
100%
Copy Ratio
Original A4
2.
3.
4.
1.
A4R
B4
A3
A3
A4
Job Detail
Settings
A4
Plain
19
3
Touch the [1-Sided to 2-Sided] key.
The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.
4
Touch the [OK] key.
5
Make sure that the automatically
selected paper size is the same size as
the original.
selected paper size is the same size as
the original.
The selected tray is highlighted. You can also copy onto paper
that is a different size than the original.
that is a different size than the original.
• The "1-Sided to 2-Sided" copy setting appears at the top of the paper size display (A).
• Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
• To change the paper size selection, touch the [Job Detail Settings] key and then the [Paper Select] key, or touch the
paper size display (A).
The following screen appears when the [Paper Select] key or the paper size display (A) is touched. Touch the tray
key that has the desired paper size and then touch the [OK] key.
The following screen appears when the [Paper Select] key or the paper size display (A) is touched. Touch the tray
key that has the desired paper size and then touch the [OK] key.
6
Check the colour mode.
The currently selected colour mode appears.
To change the colour mode, touch the [Colour Mode] key,
touch the [Full Colour] key, [Auto] key, [Single Colour] key or [2
Colour] key, and touch the [OK] key.
To change the colour mode, touch the [Colour Mode] key,
touch the [Full Colour] key, [Auto] key, [Single Colour] key or [2
Colour] key, and touch the [OK] key.
☞
COPY COLOUR MODES
(page 21)
Full Colour: The original is copied in full colour.
Auto: Colour or black and white is automatically selected when the
Auto: Colour or black and white is automatically selected when the
original is scanned.
Single Colour: The original is copied in the selected colour only.
2 Colour: Only the red areas of the original are changed to the
2 Colour: Only the red areas of the original are changed to the
selected colour; colours other than red are scanned in black.
2-Sided Copy
OK
2-Sided Copy
OK
Binding
Change
Ready to scan for copy.
2-Sided Copy
Original A4
0
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
2.
3.
4.
1.
A4R
B4
A3
A3
A4
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
A4
Plain
(A)
Paper Select
OK
Plain
Plain
Plain
Plain
Plain
A4
A4
A4R
B4
A3
Ready to scan for copy.
2-Sided Copy
Original
0
Output
Special Modes
File
Quick File
2.
3.
4.
1.
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
A4
Full Colour
Colour Mode
A4R
B4
A3
A3
A4
A4
Plain
Click on the first or last page to see other MX-1800N (serv.man45) service manuals if exist.